clean air technology Applications in USA

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling...

    By Chromatotec Group Office in Houston, TEXAS (USA).

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the chemical processing industry

    Anguil thermal and catalytic oxidizer systems are used on various applications throughout the chemical processing industry for emission abatement. Our experience includes applications on tank vents, amine tail gases, API separators, acid gases, inert streams and more. Regulatory Compliance Guaranteed, Seamless Process Integration, Efficient Destruction Technologies, Advanced System Controls.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Environmental solutions for the drying and curing sector

    In the industrial sector, drying and curing technologies from Dürr MEGTEC have been deployed in roll-to-roll processing applications for advanced battery materials, coatings of various types, composites, solar films, membranes, flexible packaging, coil coating, converting, printing, electronics, nonwovens, and other industries. Our patented flotation air bar systems transport webs contact-free without web shift, which helps ensure product quality. Capable of handling webs at a wide range of speeds and...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with the emission capture, control and compliance hurdles that both composite and carbon fiber producers face. So much so that we have developed specific technologies that address the unique needs of our customers in both industries. Please visit our Carbon Fiber Page to explore Anguil`s proprietary oxidizer designs for furnace and oven emissions. On composite applications, firms continue to battle emission levels by lowering styrene content in the resins they utilize. However,...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Online monitoring solutions for fast determination of oxygen in wet chlorine

    The purpose of fast determination of oxygen in wet chlorine is twofold: verification and control of membrane oxygen permeation, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV Office in Loveland, COLORADO (USA).

  • Premium

    Online monitoring solutions for fast determination of oxygen in dry chlorine

    The purpose of fast determination of oxygen in dry chlorine is to verify the chlorine oxygen specifications, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV Office in Loveland, COLORADO (USA).

  • Premium

    Air pollution control catalyst solutions for engine emission control sector

    After the proliferation of the Clean Air Act in 1970, the catalytic converter for automobiles was introduced as probably the most important technology in History to clean air pollution worldwide. Removing Carbon monoxide (CO), Hydrocarbons (HC) and nitrogen oxides (NOx), the catalysts contributed substantially to the elimination or reduction of smog in major cities in the USA and Worldwide.

    By Applied Catalysts based in Doraville, GEORGIA (US) (USA).

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By ECO PHYSICS AG Office in Ann Arbor, MICHIGAN (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Semiconductor

    Production of semiconductor materials require extremely clean air supply that help ensure the quality of the materials being manufactured as well as specialized gases to enable production to occur smoothly and efficiently. Teledyne API carries a complete line of Industrial gas process instruments including those that both produce and measure gases in these unique applications. Teledyne API also provides specialty gas instruments designed to help reduce or eliminate Airborne Molecular Contamination (AMC) in the...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Thermal flowmeter solutions for energy applications

    Sierra thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Tunnel solutions for the visibility monitor areas

    The TunnelTech 101 Visibility Monitor (VIS), is an essential part of any road or rail tunnel safety system. It monitors the Visibility within the tunnel and ensures that the tunnel ventilation system provides sufficient clean air for drivers to clearly see the road ahead. The TunnelTech 102 Cold smoke monitor (CSM detects smoke from a fire to rapidly warn the operator of the hazard. Secondly, used in combination with other TunnelTech 101 VIS monitors, the operator can quickly detect the locus of the fire if it is...

    By Codel International Ltd Office in Keswick, PENNSYLVANIA (USA).

  • Premium

    Recycling sorting solutions for the end-of-life vehicle scrap - shredder

    The growing demand for high-value, secondary raw materials renders targeted recycling increasingly attractive. Modern TOMRA Sorting technology generates clean non-ferrous metal fractions in customer shredder operations and results in valuable scrap metal gains.

    By TOMRA Sorting GmbH Office in Shelton, CONNECTICUT (USA).

  • Premium

    Electrochemical solutions and water technologies for professional cleaning

    Reducing the risk of infection transmission. In a world where high-density living in urban areas is increasing, and healthcare and the spreading of pandemics are among top concerns, the role of the cleaning industry is of great importance, though often underestimated.

    By Industrie De Nora S.p.A. | De Nora Water Technologies Office in Pittsburgh, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you