clean energy production Applications

11 Results found
Only show results in Virginia?
OK
  • Keyword: clean energy production ×

Filtration systems & solutions for energy sector

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

Energy and Fuels from Commercial Waste

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

Air pollution control for the ethanol/biodesel industry

by Anguil Environmental Systems, Inc.     based in Milwaukee, WISCONSIN (USA)

Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), particulate matter (PM) and hazardous air pollutants (HAPs), all regulated by environmental agencies.

Specialty Cleaners and Lubricants for Solar Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

IPC manufactures specialty detergents for solar panel cleaning applications.  Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is effective.  Contact us today for a sample of our solar panel cleaners.

Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

by OSEI - Oil Spill Eater International, Corp     based in Dallas, TEXAS (USA)

The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

by Pentek Inc.     based in Coraopolis, PENNSYLVANIA (USA)

Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system offers a proven, dust-free process with built-in engineering controls that protect both the worker and the surrounding environment during the surface cleaning process.

Metal Sorting - End of Life Vehicles Scrap Sorting

by TOMRA Sorting (TITECH)     based in Mülheim-Kärlich, GERMANY

Using modern TOMRA sorting technology you can generate clean non-ferrous metal fractions in your daily shredder operation. The processing of valuable scrap metal gains more and more importance worldwide. The aim is to generate clean, mono-fraction products from this very complex stream of End of Life Vehicles scrap metal material using suitable separation procedures. And that is worthwhile; End of Life Vehicles scrap processing does not only preserve natural resources of raw material, but it is also considerably cheaper. Compared to the aluminium production from primary raw material, using secondary material from End of Life Vehicles saves around 90% of the energy demand.

Industrial Solution for gasification & synthetic gas

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

Wastewater Treatment for the Dairy Industry

by HydroThane STP BV     based in KC `s Hertogenbosch, NETHERLANDS

Dairies` production activities result to significant quantities of wastewater and waste by-products with high organic content that requires reduction before discharge. 

Cheese whey and lactose are some of the main concentrated streams that together with the waters from the cleaning procedures can be excellent substrates for the HydroThane UASB and ECSB processes, resulting to large biogas production rates and high purification efficiency with extremely low energy requirements.

The fats and the solids removed during the pre-treatment stage can be mixed with expired products that return in the factories and produce biogas while being stabilized in a HydroThane SWD (Solid Waste Digester).

Posi-Shell Coatings

by LSC Environmental Products, LLC     based in Apalachin, NEW YORK (USA)

Posi-Shell erosion control coatings are the perfect low-cost solution to protect and stabilize slopes. Our long-term coatings are spray-applied and allow engineers or operators to protect acres (hectares) of slope in a single day. The finished coating is durable and textured, reducing water energy across large areas. The final product eliminates erosion, siltation, and (as a result) expensive rework. The product can be designed to last for years and is easily tracked into slopes when intermediate protection is no longer necessary. Indeed, when integrated, Posi-Shell actually improves soil quality by conditioning it for future seeding. Posi-Shell’s simplicity and durability make it tremendously effective at controlling windblown dust, infiltration, or runoff associated with clean or contaminated stockpiles. Unlike cumbersome tarps or geo-membranes, Posi-Shell erosion control coatings are spray applied and do not require any ballast. Posi-Shell conforms and adheres to any topography and delivers 100% clean runoff. Stockpile loading or removal is accomplished by breaking into the coating where desired. Active areas may be left open or quickly resealed if required. Posi-Shell erosion control coatings are ideal for protecting expensive piles of salt, coal, or cement clinker; and are used extensively for containing hazardous or radioactive soils.

CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

by Scalewatcher North America Inc.     based in Oxford, PENNSYLVANIA (USA)

Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

Related Terms for clean energy production

Need help finding the right suppliers?

Let the XPRTs do the work for you