clean power Applications

17 Results found
Only show results in Virginia?
OK
  • Keyword: clean power ×

Diesel Air Filter Cleaning

by DiversiTech     based in Montreal, QUEBEC (CANADA)

HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu

Dust Collector Cartridge Filter Cleaning

by DiversiTech     based in Montreal, QUEBEC (CANADA)

The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism requires 80 cfm of compressed air at 80-100 psi to function properly. How it Works Easy-to-load, cabinet lid forms seal Automatic and programmable cleaning cycles take 3-5 minutes to complete Injection Self-Cleaning System (ICS-360) blows particulate off every part of the filter Dust and debris drawn out by a powerful cyclone collector and safely stored in a 55 gallon drum Optional Filter Inspection Station and Diesel Filter Inspection Station can be used to measure restricion levels and filter integrity Features Injection Self-Cleaning System (ICS-360) ? Adjustible for diverse filter diameters and heights ??User Friendly Controls with LCD status display? Cyclone - 1,400CFM @ 4` static pressure 55 gallon dust barrel included

Environmental monitoring solution for power plant

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

Specialty Cleaners and Lubricants for Solar Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

IPC manufactures specialty detergents for solar panel cleaning applications.  Our products remove slurry, partihttp://www.ipcol.com/images/solar.gifculates, oil, and organic debris from solar panels both during the manufacturing process and in the field. Our products are excellent glass cleaners and are designed to clean delicate surfaces without leaving any interfering residues after rinsing. They are safe for use on glass, metal, plastic, and many other surfaces. For most applications a 0.5% - 1.0% solution is effective.  Contact us today for a sample of our solar panel cleaners.

Specialty Cleaners and Lubricants for Nuclear Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

Our mild yet powerful multi-purpose cleaners are effective in both industrial and critical cleaning applications.  Their unique formulation of chelants, ionic, and non-ionic ingredients produce a variety of cleaning actions that include lifting, dispersing, emulsifying, sequestering, suspending and decomposing.  They are outstanding for cleaning labware, ceramics, and stainless steel. Our detergents can replace hazardous cleaning agents used to remove radioactive materials from glassware, equipment, bench tops, chamber walls and similar surfaces.  The cleaners are also proven in defouling filter membranes used in wastewater treatment systems.

Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

by Pentek Inc.     based in Coraopolis, PENNSYLVANIA (USA)

Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system offers a proven, dust-free process with built-in engineering controls that protect both the worker and the surrounding environment during the surface cleaning process.

Agitation and mixing solutions for flue gas desulfurization

by National Oilwell Varco     based in Dayton, OHIO (USA)

FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants.  The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release.  Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air.   The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

Hazardous and Special Wastes

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an environmentally benign product called Plasmarok®.

Energy and Fuels from Commercial Waste

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Commercial Waste is similar to Municipal Solid Waste although it tends to have more biodegradable products. Commercial waste is defined as all wastes created by commercial businesses. This can include, but is not necessarily limited to, solid or liquid wastes originating from offices, stores, markets, restaurants, shopping centres and other enterprises. We receive Commercial waste into the Materials Recycling Facility (MRF) at the front end of the Gasplasma® energy from waste plant. Any recyclable materials are recovered and the remainder is dried and shredded to make Refuse Derived Fuel (RDF). The RDF is used as fuel in the Gasplasma® plant to generate clean, renewable power and heat.

Specialty Cleaners and Lubricants for Healthcare Industry

by International Products Corporation     based in Burlington, NEW JERSEY (USA)

Our powerful, earth-friendly cleaners are available in a wide range of formulas to meet specific cleaning requirements.  Our cleaners are designed to quickly and effeciently remove blood, feces, urine, mucus, fat, sweat, tissue, and other biological debris.  Common uses include cleaning diagnostic and surgical instruments, life-support devices, hospital furnishings, and institutional linens.  For most applications a 0.5% - 2.0% solution is effective, and validation methods are available.

Measurement solutions for alternative energies

by Smart Testsolutions GmbH     based in Stuttgart, GERMANY

The largest challenge around the lowering of emissions is the generation and storage of clean energy. SMART TESTSOLUTIONS is your specialist around the topics of monitoring and control of fuel cells, batteries, electrolysers or super-cap capacitors. You are developing a particularly effective fuel cell? Your new battery is supposed to be 30% more powerful than previous systems? You want to store large quantities of energy with big supercaps and emit it especially quickly again?

Diverse Surface Treatment Technologies for Military Industry

by International Surface Technologies     based in Laval, QUEBEC (CANADA)

We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

Filtration systems & solutions for energy sector

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

Ozone/UV systems for drinking water treatment

by Lifetech     based in Brno, CZECH REPUBLIC

Multiple treatment reactions and benefits are obtained at ozonation, all at the same time. Ozone based advanced oxidation processes are important because of reactions with organic molecules that are not readily oxidized by ozone. One challenge beverage suppliers face is the need to deliver a product free of bacteria and with extended shelf life. Because of its powerful disinfectant properties, environmentally clean treatment process and its oxidative ability, ozone has become the technology of choice among water bottlers worldwide.

Dustless Lead Paint Removal & Nuclear Decon Tools for Marine Industry

by Pentek Inc.     based in Coraopolis, PENNSYLVANIA (USA)

When ships, submarines and port facilities exposed to the corrosive marine environment need to be repainted, get to clean steel quickly and safely without any messy cleanup using our shrouded power tools! Old paint is removed and packaged in one step using our powerful VAC-PAC HEPA vacuum and deposited directly into 55-gallon drums, safely sealed and ready for transport and disposal when full. No costly containment is required for hazardous jobs, because dust is captured at the surface, before it’s emitted.

LifeFilta R20 Container & LifeFilta TapFilta for rural areas

by LifeFilta     based in BELGIUM

Many villages have no access to clean drinking water. Many still depend on wells, rivers and streams as their source of drinking water. To give water is to give life. Clean water can cut a community’s child mortality rate in half. It gives parents a powerful way to improve the health, hygiene, and the well-being of their children. The R20 Jerry Can would also be suitable for workers living in remote areas to obtain safe drinking water. The R20 can be filled with water from any source; river, lake, pond or stream and instantly provide clean and safe water. A family of five can use the R20 container for more than 5 years (assuming each person consume 2 liters of water per day). No replacement parts would be required.

Chlorine Level Measure Meter

by Shaanxi Shengke Electronic Technology Co.,Ltd     based in xi'an , CHINA

External Liquid Level Gauge for Chlorine tank measure / no need drilling the tank. Non intrusive Measure range: 20M Power supply: DC 24V Accuracy: 0.1% Power: 10W Signal output: 4-20mA Communication Protocols: RS-485 HART MODBUS Environment temperature: -20-70 degree Liquid temperature: -50-100 degree Explosion proof class: ExdIICT6 Protection class: IP67 www.sx-sk.com Jilina Lee Skype: jilina1986 jilina@sx-sk.com Cell: 0086 15809274235 Sonar Technology, External liquid indicator uses the principle of sonar ranging collecting the sonar signal by the special probe fixed outer wall of the tank. Pioneering the Two-Wire System, Overcoming various technical dilemmas, two-wire system External liquid level indicator has been successfully developed. Easily Installation Trial run and Maintenance, No effect on production, No need clean the tank when installing, trial running and Maintaining. Auto-diagnosed and collation, Accuracy is 0.1%

Related Terms for clean power

Need help finding the right suppliers?

Let the XPRTs do the work for you