Only show results in Virginia? Ok

clean technology industry Applications

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Environmental technology for textile finishing industry

    The mercerisation of cotton materials yields large quantities of weak caustic soda. Recovery of mercerising lye by means of our Körting evaporation technology developed specially for this process results in an immense saving of costs and a minimised impact on the environment. When combined with a specially co-ordinated lye cleaning system the result is a nearly 100% recovery of lye.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Evaporators technology for health care industry

    In a cutting-edge sector, such as Pharma & Cosmetics production, the needs related to wastewater can be summarized as optimization of the whole water cycle management, controlling the costs and respecting the environment. Within the Health Care industry, water is commonly used in liquid, either as an ingredient in many formulations and also as a cleaning agent. The wastewater coming from these processes can offer opportunities for matter recovery and water reuse.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Premium

    Industrial Solution for food

    Macrotek has designed and supplied systems for many different applications in the food sector including sugar, starch, corn, sugar cane and rendering. A common challenge in many of these industries is the collection and treatment of explosive dust. Baghouses were the primary technology for particulate clean up, however, recent major incidents and explosions in these industries, particularly sugar handling, have resulted in a review and change in dust system collection design and strategy. Macrotek is an experienced leader in the development of these new technologies.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Odor control for the food industry

    The food industry has a wide range of different production processes. Each process uses its own production technology. The food industry has very high standards when it comes to hygiene. Installations and ducting must be made out of stainless steel, in order to be cleaned periodically. Aerox has a lot of experience within the food industry and its specific demands.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface.  Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Biogas recovery for waste to energy industries

    HydroThane BSP technology is the best method for H2S removal combining deep H2S removal, a very high reliability and availability, and low lifecycle costs. The clean biogas can be used to produce electricity or to replace natural gas in a boiler.

    By HydroThane STP BV based in KC `s Hertogenbosch, NETHERLANDS.

  • QUA - Industrial Water Filtration

    QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

    By QUA Group LLC based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control (APC) equipments for pharmaceutical industry

    The pharmaceutical industry worldwide is facing a major challenge. The productions of desired chemicals leaves an amount of by-products, some of them dangerous to both humans and the environment. An incinerator is usually used to deal with the challenge to reduce the volumes of hazardous substances. This process, however, creates sub-micron particles that conventional filter technology cannot handle. By using EnviBAT’s technology for gas cleaning – the best in the industry – such issues can be greatly reduced.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Flaring Solutions for the CDM + Kyoto Protocol

    ABUTEC specializes in providing advanced technology for the CDM initiative and for carbon credit projects in the landfill and waste water industries. The Kyoto Protocol is an international agreement linked to the United Nations Framework Convention on Climate Change, which sets internationally binding emission reduction targets. There are three mechanisms within the protocol, one being the Clean Development Mechanism (CDM). A CDM project must provide emission reductions that are additional to what would otherwise have occurred.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Nuclear Decon

    Pentek is the industry leader in manufacturing, engineering and designing specialty surface decontamination technologies and processes for nuclear applications. Our technology offers a safe and environmentally friendly methodology that removes, collects and packages the waste in a single-step manner. Since 1981, our products have been used for critical work scopes in the nuclear weapons complex, commercial nuclear utility industry, and various DOD sites where strict controls are a prerequisite. The Pentek system offers a proven, dust-free process with built-in engineering controls that protect both the worker and the surrounding environment during the surface cleaning process.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Water systems for environmental sector

    It’s a well-documented fact that the fresh water drawn from our rivers, lakes and springs has degraded significantly in quality over the past several decades. In pursuit of improving the quality of our water resources, Scientists have applied magnetic technology systems to help clean rivers, lakes and salt-water lagoons. Water that could once be used for drinking, washing and irrigation is now impacted by sewage and industrial wastes. This makes untreated water resources non-usable for residential purposes. This challenge is being addressed by MAGNATION Next Generation Systems. This system safely and effectively helps biologically activate the water for a healthier bio-environment and improved eco-balance.

    By Magnation Water Technologies - Magnation Corporation based in Oakland, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you