Only show results available in Virginia? Ok

clean water tank Applications

  • Solutions for the large tank cleaning and degassing

    Rapid turnaround is essential when an oil or fuel storage tank is stripped for repair or scheduled maintenance.  This time-sensitive process can be frustrated by the presence of high vapor levels and unpumpable sludge.  Over the past 30 years, BioSolve Pinkwater has proven to be a worker friendly solution to these challenges.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Wastewater treatment for the tank cleaning

    The waste water from the transformation process in wineries has a high organic material content, as well as large pH variations that can be harmful to the environment. This water treatment must be carried out by using the appropriate processes.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Solutions for the small tank cleaning and degassing

    BioSolve Pinkwater is a proven tool used in the process of removing and repairing fuel storage tanks of all sizes.  Pinkwater is best known for its unmatched performance suppressing volatile organic vapors that are present when working with fuel tanks (both AST and UST). The product can also be used to assist in loosening and removing tank bottom sludge.  Major US and foreign oil companies as well as small tank removal teams find working with Pinkwater to be safe, simple, effective and worker friendly as compared to alternative approaches to tank cleaning and degassing.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Algae control

    Excessive algae growth can throw even the best water treatment processes out of balance. Algae can clog intake screens, fluctuate pH levels, increase chlorine demand, and negatively affect the taste and smell of water. By blocking sunlight within water treatment tanks, you can stop algae growth, reduce chemical usage, and minimize the formation of disinfectant by-products (DBPs). Temperature is better controlled and maintenance associated with algae cleaning is simplified. The results? Better water treatment and lower operating costs.

    By Geomembrane Technologies, an Evoqua brand based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Storm water flushing for sewage wastewater treatment

    With the increased use of storm water retention tanks, the need arises to routinely clean the tanks. Regular cleaning maintains combined sewer overflow (CSO) capacity and prevents septicity and odor problems associated with stagnant effluent. PWTech® Tipping Buckets provide a simple yet robust solution for flushing retention tanks.

    By Process Wastewater Technologies LLC based in Rosedale, MARYLAND (USA).

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid response needs, often within 24 hours. We offer dosing options are designed to meet all safety requirements and sized to meet your specific process and dosage rates requirements. Our Applications Engineers and Equipment and Engineering Services teams will provide timely and thorough applications assistance and technical support during the entire project. Download the Rapid Response Solutions Brochure (PDF) Sample Applications Examples of where our Rapid Response Program has successfully addressed treatment challenges include the following: Temporary application of hydrogen peroxide as a source of supplemental dissolved oxygen in biological treatment systems during periods of excessive BOD loading Hydrogen peroxide pretreatment of high strength wastewater to reduce toxicity or BOD/COD prior to biological treatment Emergency hydrogen peroxide treatment of lagoons or ponds to control hydrogen sulfide and other odors Shock cleaning of cooling water systems for biofouling and slime control

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Centrifuges for industrial waste water, minerals and oil industry

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil from the cleaning of crude oil tanks. Processing of drilling slurry, drilling emulsion and drilling muds. Processing of ore and minerals.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Vacuum excavation solutions for resetting of headstones in cemetery

    Using a Vac-Tron vacuum excavator to soft-dig the hole for the Placement of Headstones. They are usually 3’ long x 2’wide and 3’ deep. You can drive through the grave yard on the roads and run your hose out and dig your foundation hole using vacuum. When you’re done all the dirt is collected in the debris tank. No one will ever know you were there. This is a very clean and respectful way to place Head Stones.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Salt Water Disposal - Operational improvements and savings

    Adding Wilsa ElectroWaveTM technology to existing separation equipment at Salt Water Disposal Wells (SWD) or Salt Water Injection Wells (SWIW) has a profound impact on the amount of oil can be recovered without using chemicals. Additionally there is a host of operational improvements and savings that result from the Wilsa Effect. Oil free solids settle out faster for cleaner, clearer brine for injection. Cleaner brine means less injection pressure and fewer acid jobs in the formation. Pump packings last longer by reducing solids and abrasive elements from the brine. More targeted solids settling allows for less tank clean outs. All of this adds up to significant operational savings.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Premium

    Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Ice blasting technology for municipality

    To maintain a healthy city all the walkways, sideways, sewages, water reservoirs are need to be cleaned on a regular interval. Coulson Ice blast is a cost effective solution of the cleaning issues. It has the low operating cost than any other cleaning technology. Ice blasting is a non-abrasive and chemical free cleaning process with negligible airborne which uses only 33 USG/hr of water.

    Applications for Coulson Ice Blast in the Municipality sector:

    Ice
    • Sidewalk Cleaning
    • Cleans Stained Concretes, Bricks
    • Cleaning Sewage & Water Reservoirs
    • Gum removal
    • Degreasing and cleaning pump,motors and General Equipment
    • Cleans Garage Trucks, Street Sweepers
    • Removes Paint & Graffiti
    • Cleaning Bitumen
    • Degreasing and Cleaning of Tanks and Vessels
    • Degreasing and Cleaning of tanks and Vessels

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you