clean water technology Applications

16 Results found
Only show results in Virginia?
OK
  • Keyword: clean water technology ×

Water purification solutions for pure & clean drinking water

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Calgon Carbon`s cost-effective technologies ensure tens of millions of people drink clean, safe water every day. Proven Solutions for Safe, Pure Drinking Water. The very quality of our life depends on a reliable supply of clean drinking water. At Calgon Carbon, we are deeply involved in meeting this challenge. Offering a wide variety of options for purification, performance, and regulatory compliance, we are leading the way in helping communities address drinking water concerns. To learn more about solutions for clean drinking water.

Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

QUA - Industrial Water Filtration

by QUA Group LLC     based in Canonsburg, PENNSYLVANIA (USA)

QUA® is an innovator of advanced membrane technologies that address the most demanding water challenges. QUA’s products enable its OEM partners to provide cutting-edge solutions to end users in industrial & infrastructure markets worldwide. The company’s diverse product portfolio includes FEDI® (fractional electrodeionization), Q-SEP® (hollow fiber ultrafiltration membranes), CeraQ™ (Ceramic Filters), and EnviQ™ (flat sheet submerged ultrafiltration membranes). Our filtration products help you improve your plant’s design economics & reliability reduce fouling simplify cleaning lower the total installed cost reduce the footprint of overall wastewater treatment. Committed to ongoing innovation, QUA manages the entire lifecycle & manufacturing chain of its products from the initial concept to manufacturing according to the most rigorous quality standards. QUA products are manufactured in a state-of-the-art membrane manufacturing facility with continuous online monitoring to main

Online Monitoring for the Drinking Water Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

Evaporators technology for health care industry

by EVALED - Veolia Water Technologies     based in Zoppola (PN), ITALY

In a cutting-edge sector, such as Pharma & Cosmetics production, the needs related to wastewater can be summarized as optimization of the whole water cycle management, controlling the costs and respecting the environment. Within the Health Care industry, water is commonly used in liquid, either as an ingredient in many formulations and also as a cleaning agent. The wastewater coming from these processes can offer opportunities for matter recovery and water reuse.

Ozone/UV systems for drinking water treatment

by Lifetech     based in Brno, CZECH REPUBLIC

Multiple treatment reactions and benefits are obtained at ozonation, all at the same time. Ozone based advanced oxidation processes are important because of reactions with organic molecules that are not readily oxidized by ozone. One challenge beverage suppliers face is the need to deliver a product free of bacteria and with extended shelf life. Because of its powerful disinfectant properties, environmentally clean treatment process and its oxidative ability, ozone has become the technology of choice among water bottlers worldwide.

Diverse Surface Treatment Technologies for Military Industry

by International Surface Technologies     based in Laval, QUEBEC (CANADA)

We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

Solutions for the wastewater sector

by DMT Global Environmental Solutions BV     based in Joure (NL), NETHERLANDS

Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

Water systems for environmental sector

by Magnation Water Technologies - Magnation Corporation     based in Oakland, CALIFORNIA (USA)

It’s a well-documented fact that the fresh water drawn from our rivers, lakes and springs has degraded significantly in quality over the past several decades. In pursuit of improving the quality of our water resources, Scientists have applied magnetic technology systems to help clean rivers, lakes and salt-water lagoons. Water that could once be used for drinking, washing and irrigation is now impacted by sewage and industrial wastes. This makes untreated water resources non-usable for residential purposes. This challenge is being addressed by MAGNATION Next Generation Systems. This system safely and effectively helps biologically activate the water for a healthier bio-environment and improved eco-balance.

Zero Liquid Discharge wastewater solution

by ENCON Evaporators     based in Hooksett, NEW HAMPSHIRE (USA)

Zero Liquid Discharge (ZLD) describes a process that completely eliminates liquid discharge from a system. The goal of any well-designed ZLD system is to minimize the volume of wastewater that requires treatment, process wastewater in an economically feasible manner, while also producing a clean stream suitable for reuse elsewhere in the facility. Interest in ZLD technology has grown in the industrial manufacturing sector over the past decade. Companies may begin to explore ZLD because of ever tightening wastewater disposal regulations, company mandated green initiatives, public perception of industrial impact on the environment, or concern over the quality and quantity of the water supply.

Salt Water Disposal - Operational improvements and savings

by Hudson Industries     based in Vienna, OHIO (USA)

Adding Wilsa ElectroWaveTM technology to existing separation equipment at Salt Water Disposal Wells (SWD) or Salt Water Injection Wells (SWIW) has a profound impact on the amount of oil can be recovered without using chemicals. Additionally there is a host of operational improvements and savings that result from the Wilsa Effect. Oil free solids settle out faster for cleaner, clearer brine for injection. Cleaner brine means less injection pressure and fewer acid jobs in the formation. Pump packings last longer by reducing solids and abrasive elements from the brine. More targeted solids settling allows for less tank clean outs. All of this adds up to significant operational savings.

CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

by Scalewatcher North America Inc.     based in Oxford, PENNSYLVANIA (USA)

Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

Shoreline reconstruction

by Watermaster - Aquamec Ltd.     based in Säkylä, FINLAND

Watermaster technology is an excellent solution for reconstruction of shorelines in urban and suburban areas. You do not have to put up with a muddy, rocky or low water bottom. Watermaster Classic can deepen, build and clean out the shorelines. With this multipurpose technology the right solution for various problems can be chosen, so that the work is done cost effectively and properly. Reconstructions of shorelines, building quays and other tasks done by Watermaster save the nature and the work is done safely and effectively.

Filtration systems & solutions for energy sector

by Porvair Filtration Group     based in Fareham, UNITED KINGDOM

Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

Flaring Solutions for the CDM + Kyoto Protocol

by ABUTEC LLC     based in Kennesaw, GEORGIA (US) (USA)

ABUTEC specializes in providing advanced technology for the CDM initiative and for carbon credit projects in the landfill and waste water industries. The Kyoto Protocol is an international agreement linked to the United Nations Framework Convention on Climate Change, which sets internationally binding emission reduction targets. There are three mechanisms within the protocol, one being the Clean Development Mechanism (CDM). A CDM project must provide emission reductions that are additional to what would otherwise have occurred.

Monitoring Sewage Flow

by Solid Applied Technologies Ltd. (SolidAT)     based in Ashkelon, ISRAEL

Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

Related Terms for clean water technology

Need help finding the right suppliers?

Let the XPRTs do the work for you