climate modeling Applications

AgriAir purifiers will rid the air of volatile organic substances that may be associated with indoor growing operations. Our line of air purifiers is designed to remove odors and sanitize the air by destroying contaminants at the source, not masking them. Available in a variety of models that are designed to suit any commercial operation. Large or small-scale grow, AgriAir has a purifier designed to meet your garden’s demands.Indoor cultivation always gives the grower the upper hand. In indoor growing, you have the full control of the environment for your plants. Light, water, nutrients, temperature and humidity can all be controlled. However, you also need to control the odor of plants growing indoors.

By AgriAir Equipment - a Brand by Omnitec Design Inc based in Mukilteo, WASHINGTON (USA).

Air pollution and meteorology are disciplines where 3D visualization is beginning to become commonplace on the evening news. EVS-PRO ,MVS, and EnterVol provide the tools to visualize and animate this data in countless new ways to meet any requirement from television weather reports to scientific analysis.

By C Tech Development Corporation based in Las Vegas, NEVADA (USA).

By SoundPLAN International LLC based in Shelton, WASHINGTON (USA).

CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to abatement systems can be monitored using the one analyser.

By Protea Limited based in Middlewich, UNITED KINGDOM.

The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane hydrocarbons that are of primary concern.

By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international networks using the Tekran Atmospheric Mercury Speciation System.

By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

It has been established that organic aerosol (OA) makes up for a major fraction of fine particulate matter in all region of the atmosphere. This fraction accounts approximately for half of the total PM2.5 dry mass.1,2 Primary OA is directly emitted in the troposphere from anthropological and natural sources whereas secondary OA (SOA) is formed in-situ in the atmosphere from the oxidation of biogenic or anthropogenic gas-phase precursors and subsequent partitioning of the less volatile products into the particle phase. The current number is that, on a global scale, SOA would represent around 60% of the overall OA.3 However, recent global mass-balance estimations for the removal of volatile organic compounds (VOC) suggest that this number could under-predicts SOA production.4 Recent field measurements in urban locations are also in support of a larger share, indicating that SOA is the dominant fraction of OA, with amounts considerably 20 greater than models predictions.

By Chromatotec Group based in Val de Virvée, FRANCE.

Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

The Meteorological research community is very ambitious to understand climate changes and global impact on life. With modern advanced measurement equipment, e.g. satellites, remote sensing technologies and sophisticated computer models, multiple meteorological parameters can be analyzed at a large scale at the same time. As the climate system is very complex it is difficult to give accurate predictions of our future climate. We work with climate models, which are based on the consequences of impacts thus far observed. Apart from these impacts additional forcings occur, which make it even harder to give reliable climate predictions. Nevertheless, our present sophisticated climate models enable us to give a characterization of our future climate. For instance, we expect that before the end of this century, the average surface temperature will have increased by 1.4º to 5.8ºC.

By EKO Instruments based in San Jose, CALIFORNIA (USA).

Weather Analytics is the best single source of data used for quantifying and profiling weather-related risks for the engineering, architectural and construction markets. We provide global geographic coverage and easy access to comprehensive climate intelligence, including on demand Typical Meteorological Year (TMY) and Actual Meteorological Year (AMY) climate files for simulation and modeling.

By Weather Analytics based in Bethesda, MARYLAND (USA).

Over the past 20 years active fluorescence has been widely adopted by the scientific community, ecosystem managers and crop growers as a rapid and non-invasive method of estimating photosynthetic performance within a wide range of organisms, including phytoplankton (microalgae and cyanobacteria), biofilms, benthic autotrophs (corals, macroalgae and sea grasses) and terrestrial plants. The main rational for applying active fluorescence is that changes in key fluorescence parameters can reveal the early onset of chronic and acute degradation of photosynthetic performance and subsequent growth, e.g. resulting from nutrient deficiency or the presence on one or more toxicants.

Over the past 15 years we have been developing an active fluorescence technique called Fast Repetition Rate (FRR) fluorometry to monitor algae populations in the open-ocean, primarily to support climate and ocean modelling.

By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.