climate system Applications

57 Results found
Only show results available in Virginia?
OK
  • Keyword: climate system ×

Gas monitoring instruments and systems for process NOx measurement

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

Gas monitoring instruments and systems for engine emissions measurements

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

Gas monitoring instruments and systems for DeNOx process control

by Gasmet Technologies Oy     based in Helsinki, FINLAND

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

Gas monitoring instruments and systems for stack testing

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

Air Conditioning Energy Saving Systems

by EnviroTech Limited     based in Masdar City, UNITED ARAB EMIRATES

Air Conditioning Energy Saver Systems, Made in England, UK saves up to 30% of Air Conditioning Energy Consumption and Electricity Bill Costs. The UK made Air Air Conditioning Energy Saver System is Ideal for the following Key Applications:- Government Buildings, Transport Terminals, Airports, Hotels, Villas and Houses, Offices, Leisure Facilities, Industrial Buildings, Clubs, Supermarkets, Restaurants, Retail, Shopping Malls, Labor Accommodation, The ETL AirCon Energy Saver System from EnviroTech (ETL) is “Manufactured in England” with distributors in: Abu Dhabi, Dubai, Sharjah, RAK, and Ajman throughout the U.A.E also in Oman, Kuwait, Egypt and Saudi Arabia will save between 20% to 30% of Air Conditioning kWh Energy Consumption and Electricity Costs by reducing the run times on the air conditioning unit compressor and increasing Energy Efficiency. This intelligent UK air conditioning energy saver system or air conditioning energy saver system will analyse the temperatures.

Moisture Monitoring for Instrument Air & Compressor Systems

by Moisture Control & Measurement Ltd     based in Wetherby, UNITED KINGDOM

The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

Disinfection of air-conditioning systems

by Dimtech S.A     based in Keratsini, GREECE

The good condition of an air-conditioning system in terms of hygiene is a key element in maintaining at a high level the quality of indoor air. In this way an important factor in human health is ensured. The basic steps related to the hygiene of an air-conditioning installation are: Mechanical cleaning of vents. Chemical cleaning and disinfection.

Fire Weather Networks , Wildfire Supression

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

Every year, 35 million hectares —or about 1% of the world’s forests— are lost to wildfire. Recently in North America the area burnt by wildfires has increased sharply, while regions like Southeast Asia and South America have seen a rise in the number of land-clearing fires and other escaped wildfires in equatorial forests. The extraordinary costs of fire suppression activities are matched only by the damages to property and ecosystems these fire wreak—in South America, this loss is estimated at $1.6 billion annually. In the US, damages from major fires were found to account for as much as 95% of total costs from fire. Advances have been made through the use of basic weather data from meteorological stations. In years past, fire agencies used this data to develop fire danger rating systems that helped them predict, prevent and suppress fires. How can fire management agencies improve their ability to predict, prevent and fight wildfires? By installing dedicated fire weather network.

Meteorological Monitoring

by FTS     based in Victoria, BRITISH COLUMBIA (CANADA)

FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

Bio-Contaminant Control

by AgriAir Equipment     based in Mukilteo, WASHINGTON (USA)

Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to protect potentially vulnerable patients from dangerous microbes. In this new era of exponentially expanding plant pathogens affecting indoor crops, Hydroperoxide generators built into the AgriAir system are the answer to concerns that the airborne environment stays as sterile as possible. IHP technology destroys microbes, pathogens, and virus by changing their molecular structure and rendering them harmless.

Petrochemical

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

Wood Products

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC is a leader in providing regenerative thermal oxidizers (RTO) for VOC control for products such as OSB, MDF, SYP, plywood, particleboard, wood pelletizing and other engineered wood products, with particular expertise in solving the problems of media plugging and alkali attack associated with wood dryer exhaust. With thousands of systems installed worldwide in many process industries, MEGTEC has the knowledge to provide you with the best solution for your specific needs. MEGTEC’s designs are modular and cleanable, using alkali-resistant ceramics and corrosion-resistant materials of construction.

Ethanol and Biofuels

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Controlling the VOCs and CO emissions produced in the feed dryers (wet and dry milling), coupled with the particulate matter being introduced and the need for the reduction of NOx are just the start of having a successful abatement solution. The challenges of smooth pressure control that reduces dryer fluctuations and plug resistant media that lessen the frequency of bake-outs are also part of a successful abatement system and we have the solutions. Our engineered oxidation systems provide reliable performance with minimal maintenance requirements. Externally accessible valve bearings and other critical components are kept out of the corrosive moisture-laden streams extending the life of the equipment and facilitate maintenance intervals. Our simple oxidizer designs control your emissions with minimal facility intervention and allow us to provide you with reliable and dependable equipment.

Power Generation

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

Coating and Laminating

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

Waste to Energy

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

Electronics

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

Measurement solution for CFC abatement control via two stream FTIR system

by Protea Limited     based in Middlewich, UNITED KINGDOM

CFC usage in industry

Although the use of CFCs in domestic products has been widely phased out, CFCs chemicals still prove a vital ingredient in the production of insecticides and herbicides. Such products aim to increase the rate of crop production all over the world. All aspects of such a manufacturing process in relation to environmental impact must be well controlled. The use and pre-emission removal of CFCs in the intermediary steps of the insecticide production needs to be monitored with 100% efficiency.

Gas Detection

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

Gas Detection is our core business, whether portable, colormetric, fixed systems or Hazmat. We do more than get you the equipment you need--we also help you select it, calibrate it, service it and maintain it. Our technicians, our sales reps and top management can speak with authority on the capabilities of our equipment and match it to your specific application. And we are the champions of the one-of-a-kind solution, because we have the know-how and the right tools.

Continuous emissions monitoring for brick plants

by Opsis AB     based in Furulund, SWEDEN

Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of maintanence.

Need help finding the right suppliers?

Let the XPRTs do the work for you