Only show results available in Connecticut? Ok

CO2 analyzer Applications

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Industrial process and environmental monitoring

    Laser Gas analyzer Oil refining, CO, CO2, O2, CH4 Ethylene cracking CO, CO2, etc. EO/EG, PE/PP, O2, C2H4, etc. Ethyl benzene/styrene monomer/PS, O2, CO/CO2, Trace water in the benzene PTA, CO, CO2, O2 Coal gasification O2 Mathanol/ammonia/urea O2, CO, CO2, NH3, etc. Chlor-alkali/PVC H2O, O2, CO2, C2H4, etc Sulphuric acid O2

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Process analyzers & instruments for CO/CO2

    By AMETEK Process Instruments based in Pittsburgh, PENNSYLVANIA (USA).

  • Premium

    Online Gas monitoring

    Laser Gas analyzer Technical control of CO, CO2 , 0-100%/0-50% Safety Supervision of O2, 0-5%/0-21% Explosion-proof The front/back of recycling forced-draught fan The front/back of gasometer

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Portable and fixed gas analysers for medical gas monitoring

    Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Gas analyzers for the food and beverage industry

    Detecting CO2 impurities: Ammonia, Acetaldehyde, Benzene, Total Sulfur Content, Total Hydrocarbons, SO2, COS. Carbon dioxide (CO2) is a commonly used additive in food and beverage industry (e.g. for soft drink, brewery, and champagne carbonation). Its fabrication process can lead to the presence of impurities such as aromatics, BTEX, ammonia, acetaldehyde, Total Hydrocarbons and sulfur compounds (Total Sulfur Content, SO2, COS, mercaptans...).

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Online monitoring solutions for the determination of CO/CO2 in vent gases

    Determining levels of CO and CO2 and their respective ratio in the oxychlorination reactor contributes to overall process efficiency. The on-line analyzer system uses a selective CO/CO2 measurement by means of multi-wavelength infrared with automatic optical span possibility.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Process monitoring solutions for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    BTEX and VOC gas analyzers for ambient air monitoring

    This market is driven by law and legislations made in Europe and/or USA (US EPA). It deals with ambient air monitoring : analysis / calibration / automatic zero air in continuous 7 days a week. Ambient air monitoring: in France this service is controlled by associations that calculate the ATMO index. CHROMATOTEC instruments such as the BTX ,the Sulfur and the VOC analyzers can be a good complement of their analyzers such as O3, CO2, DUST… in the analysis of ambient air.

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Industrial monitoring solutions for the gas analysers areas

    Most large coal fired power plants and combustion processes are required to monitor CO, NO and NO2 (NOx), SO2 and possibly CO2; in addition the analyser has to be normalised to Standard conditions. For this application CODEL offers the five channel GCEM 40 series which uses Infrared absorption to measure these gases plus moisture, pressure and temperature. The analyser can be configured for single channel operation to monitor any of these gases plus CH4 and HCl.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you