CO2 capture process Applications in Europe

  • Premium

    Gas analyzers and monitoring systems for Carbon capture & storage (CCS)

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Continuous emissions monitoring for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Measurement solution for CO2 capture by anime absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for CO2 monitoring

    Monitoring industrial processes, CO2 gas quality control and indoor air quality can all be achieved using Geotech`s wide ranging CO2 analysers.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Measurement solution for CO2 capture by amine absorption

    The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an absorber. Amines of different types are used as the absorber. An amine CO2 capture plant can capture as much as 90% of the...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Gas analyzers and monitoring systems for Cement production

    Biggest CO2 Emission Producers; Cement is the main ingredient of concrete, which is the most common building material in the world. Cement industry is one of the biggest CO2 emission producers mainly due to the huge production capacities and calcination process, which is important part of the cement production.

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    High quality gas sensing solutions for agriculture

    Cost-effective long term continuous measurement of CO2. Commercial greenhouse control systems measure and control temperature and CO2 concentration for optimum growth. Edinburgh Sensors’ low range CO2 Guardian NG is designed for long term continuous measurement of CO2 and is a cost effective solution for CO2 measurement in commercial greenhouse control systems. The Gascard NG CO2 is also widely used to detect CO2 in Pig and Poultry processing applications where high concentrations of CO2 are used.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Industrial manufacturing solutions for the pulp & paper industry

    Paper manufacturing involves many chemical processes that drive the emission of nitrogen dioxide (NO2), sulfur dioxide (SO2), and carbon dioxide (CO2). Nitrogen dioxide and sulfur dioxide are major contributors of acid rain, whereas CO2 is a greenhouse gas responsible for climate change. In addition, wastewater discharge for pulp and paper mills often contains alcohols, chelating agents, and inorganic materials like chlorates and transition metal compounds. Furthermore, chlorine and compounds of chlorine are used...

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    Online monitoring solutions for the determination of CO/CO2 in vent gases

    Determining levels of CO and CO2 and their respective ratio in the oxychlorination reactor contributes to overall process efficiency. The on-line analyzer system uses a selective CO/CO2 measurement by means of multi-wavelength infrared with automatic optical span possibility.

    By AppliTek NV based in Nazareth, BELGIUM.

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. Office in Köln, GERMANY.

  • Premium

    Marine monitoring solutions for the SO2/CO2/NOx monitoring

    Process control of a SO2 scrubber on a ship is a challenge due to wet and corrosive gases. In such environment, extractive gas sampling systems require high levels of maintenance in order to operate correctly. OPSIS monitoring system solves this by using an optical, non-contact, cross-duct technique. A light beam is sent across the duct or stack to be measured, and the captured light is sent through an optical fibre cable to an analyser. The analyser measures SO2, CO2 and NOx concentrations using UV and IR...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Carbon dioxide mass flow meters flow solutions

    Thermal mass flowmeters are ideal for Carbon Dioxide metering and mass flow control. Sierra specializes in accurate mass flow measurement and/or control of CO2 gas. Applications range from general industrial process control across numerous industries to Green House Gas monitoring requirements and general research.

    By Sierra Instruments, Inc. Office in Malvern, UNITED KINGDOM.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly smelling...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Metals & mining solutions for the aluminum sector

    The primary metals manufacturing industry includes aluminum production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from aluminum rolling mills, including fume exhaust, ventilation and process cooling systems. The aluminum industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and valves.

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. Distributor in UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Metals & mining solutions for the iron & steel industry

    The primary metals manufacturing industry includes iron & steel production. A variety of clean air solutions are required for capturing, conveying, and collecting emissions from steel rolling mills, including fume exhaust, ventilation and process cooling systems. The iron & steel industry also requires technologies for product recovery, along with dampers and expansion joints, and pumps and valves.

    By CECO Environmental Office in Nunspeet, NETHERLANDS.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Process Analytics - Biotech and Hygienic Processes

    METTLER TOLEDO/INGOLD offers a wide range of hygienic and sterilizable/auto- clavable measurement solutions for biotech and hygienic processes. Based on field experiences and expertises in hygienic design for CIP (Cleaning-in-Place) and SIP (Sterilization-in-Place) applications our solutions comply with the most stringent industry requirements. Critical biotech/hygienic applications in pharmaceutical, food and beverage are controlled by measuring pH, conductivity, dissolved oxygen, CO2 and turbidity.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Carbon Dioxide (CO2) monitoring

    Carbon dioxide (CO2) is emitted in a number of ways. It is emitted naturally and through human activities like the burning of fossil fuels. Carbon dioxide (CO2) is generated as a by-product of the combustion of fossil fuels or the burning of vegetable matter, among other chemical processes. Small amounts of carbon dioxide are emitted from volcanoes and other geothermal processes.

    By Ecotech Pty Ltd Distributor in Assemini, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you