Only show results in Virginia? Ok

coal-to-liquid Applications

  • Solid-liquid Separation / Filtration / Dewatering

    Solid-liquid Separation of Mining Industries: Coal Gravel quarries Ore extraction

  • Coal storage for the mining industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Premium

    Methane Sensing for Coal Mining

    Application: The majority (around 60%) of the coal seams currently being extracted worldwide are so far underground that open cast mining cannot take place and, therefore, underground mining techniques need to be used. Consequently, workers have to enter and work in confined spaces. One of the major problems that this creates is the dangers from Methane (CH4) gas which occurs in Mine gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Coal pulverizing for the coal industry

    Columbia Steel has established itself as a manufacturer of quality replacement parts for coal pulverizers and ash crushers used in power plants.

    By Columbia Steel Casting Co., Inc. based in Portland, OREGON (USA).

  • Coal mine tailing pipe

    Advantage of UHMWPE pipe in mining and metallurgy Coke, mining powder, pulp and slag from mining and metallurgy is quite abrasive to pipelines. Traditional steel pipe can only use for 6 or 12 months for transmission of above media and need to turn 90 degrees every half year. Meantime, UHMWPE pipe has extraordinary wear resistance which greatly reduces damage of pipes from abrasion and its working life is more than 4 times that of traditional steel pipe. With good impact resistance and high flexibility, UHMWPE pipe can withstand impact from external force and diastrophism. Wear resistant UHMWPE pipe is better alternative as transmission pipe for mining and metallurgy

    By Shandong Buoy & Pipe Industry based in CHINA.

  • Coal Fines Drying

    Created during the crushing and drying phases of coal mining, coal fines (particles smaller than 6mm) not only present disposal issues, they can pose a health hazard to personnel and a contamination risk to the site. However, if processed correctly, coal fines can be converted into a fuel source making them a valuable commodity. It is estimated that coal fines, once properly processed, could satisfy more than 5% of the U.S. yearly demand for coal. Control costs, raise profits, and protect the environment by consulting VulcanĀ® Systems about your coal fines project. Our experts are here to help you find the right drying system to meet your needs. We can recover close to 100% of the value of the coal with our Coal Fines Drying System. At VulcanĀ® Systems, we design, manufacture, and install each system to deliver the highest value and quality, and our service extends well beyond commissioning.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Mining & minerals solutions for coal preparation industry

    WesTech designs and manufactures thickeners for the coal prep industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners and Deep Bed Paste Thickeners. Paste thickening is a proven technology increasing the profitability of mining operations. In the coal preparation plant there are two applications for paste thickening: concentrating fine coal and producing paste from coal tailings for increased water recovery and elimination of tailings ponding. Paste thickeners recover the maximum water possible from tailings streams. Tailings disposal sites have a longer life and the land can be reclaimed faster and easier. New tailings disposal sites can be smaller and significantly less costly.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Continuous Gravimetric Feeding for Coal Mining Industry

    Applications in coal mining, the processing of non-ferrous metals, costeaning and preparation in mines require technology and materials capable of withstanding the most extreme conditions. Schenck Process solutions prevail where others give up. Our products are durable, indestructible and extremely reliable under the most difficult conditions.

    Whether large lumps or the finest fragment, wet or dry and irrespective of whether using ore, scrap, lime powder or hot sinter up to 1,000 °C – vibratory equipment supplied by Schenck Process can deal with all types of bulk materials. Every year around 10 million tonnes of raw coal are freed of impurities with the help of our coal washing plants – which represents our contribution to environmentally friendly energy production.

    Our customised application solutions include both heavy-duty and static weighing technology, conveying, screening, drying & cooling and dewatering. From planning and design through to the construction of the plant sections, reliable controls and connection to data systems.

    By Schenck Process Group based in Sandnes, NORWAY.

  • Gas/Liquid and liquid/liquid mixing for air stripping applications

    The growing demand placed on the world’s water, in combination with more stringent water quality regulations, have placed unprecedented demands to provide safe, reliable and aesthetically pleasing drinking water. Air stripping is an effective way of removing volatile organic chemicals (VOCs) from contaminated water and is commonly used for this application. Air stripping systems mix air with a water supply with the goal to generate the largest possible air-water contact area so that VOCs and dissolved gases, such as radon and hydrogen sulfide, will move from the water to the air. In addition to removing VOCs, air stripping is primarily used for removing oxidizing contaminants such as iron and manganese, improving taste, or removing odor. Air stripping is an EPA Best Available Technology (BAT) for some VOCs including benzene, toluene, xylene, tri/tetrachloroethylene, trihalomethanes, vinyl chloride and many others.

    By Mazzei Injector Company, LLC based in Bakersfield, CALIFORNIA (USA).

  • Premium

    Monitor Dredging Slurry Flow

    Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum and slurry velocity. The operating conditions are extremely harsh and any sensing components in contact with the abrasive slurry can be damaged. But dredge operators need accurate real-time flow information to properly manage production so equipment manufacturers have been seeking innovative monitoring solutions...

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Electrostatic Precipitator

    An electrostatic precipitator (ESP), or electrostatic air cleaner is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an induced electrostatic charge. Electrostatic precipitators are highly efficient filtration devices that minimally impede the flow of gases through the device, and can easily remove fine particulate matter such as dust and smoke from the air stream.[1] In contrast to wet scrubbers which apply energy directly to the flowing fluid medium, an ESP applies energy only to the particulate matter being collected and therefore is very efficient in its consumption of energy (in the form of electricity).

    By MEVADHASHMA based in Coimbatore, INDIA.

  • GIS software for mining industry

    The resources in the earth`s crust require sophisticated technology to discover, extract, and manage. Since mining is inherently spatial, requiring accurate knowledge of areas of the earth`s surface and subsurface, geospatial technology is best suited to intelligently oversee all phases of the mine operation. GIS gives mining companies the tools they need to operate mines responsibly and at optimum efficiency. It is a comprehensive, interoperable technology specifically designed to compile, process, display, analyze, and archive volumes of interdisciplinary data.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Premium

    Solid/liquid separation for environment

    Tight municipal budgets. Water shortages. A need for renewable energy. Today, there is simply no room for waste. Getting the most efficient solid/liquid separation is essential not just to profitability but ensuring sustainable growth.

  • Liquid/solid separation for mining

    PHOENIX technologies for liquid/solid separation has led the way in mining and aggregates & industrial minerals since 1984

    By PHOENIX Process Equipment Co. based in Louisville, KENTUCKY (USA).

  • Premium

    CO gas monitoring for coal pulverising mills

    Our range of safety analysers can offer early detection of fire / explosive conditions. From CO monitors for pulverising coal mills through to UV flame and smoke detectors installed on oil rigs and the cross-channel passenger shuttles, operated by Eurotunnel.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Vertical mixing for coal power plants

    By REDOR sp. z o.o. based in Bielsko-Biała, POLAND.

  • Material handling equipment for petroleum and coal industry

    Petroleum Refineries, Asphalt Paving, Roofing, and Saturated Materials Manufacturing, Asphalt Paving Mixture and Block Manufacturing, Asphalt Shingle and Coating Materials Manufacturing, Other Petroleum and Coal Products Manufacturing.

    By TerraSource Global based in St. Louis, MISSOURI (USA).

  • Premium

    Air pollution control for the coal-bed methane abatement industry

    Coal-bed Methane Abatement – Coal mine ventilation of methane.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you