coal waste Applications

17 Results found
Only show results available in Virginia?
OK
  • Keyword: coal waste ×

Material handling equipment for petroleum and coal industry

by TerraSource Global     based in St. Louis, MISSOURI (USA)

Petroleum Refineries, Asphalt Paving, Roofing, and Saturated Materials Manufacturing, Asphalt Paving Mixture and Block Manufacturing, Asphalt Shingle and Coating Materials Manufacturing, Other Petroleum and Coal Products Manufacturing.

Continuous process waste plastic to oil recycling

by Pyrolysis plant for recycling waste tyre/plastic     based in Henan Province, CHINA

continuous waste plastic to oil Solution: Continuous pyrolysis plant Function: Recycling waste plastic to fuel oil Applicable raw material: ABS / Mixed plastic, PE/PP/PS Plastic, PET Plastic not recommended Output: 50-90% fuel oil ,10-50% carbon blakc Heating fuel: Coal / wood/ fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/ Q345 Boiler plate

Continuous process waste tyre to oil recycling

by Pyrolysis plant for recycling waste tyre/plastic     based in Henan Province, CHINA

Solution: Continuous pyrolysis plant Function: Recycling waste tire to fuel oil Applicable raw material: Car tire, Truck tires, OTR tries, etc Output: 45-52% crude oil, 30% carbon black,12-15%steel wire, 8% waste gas Heating fuel: Coal / wood / fuel oil / gas Pyrolysis plant land size: 25x20m Reactor design: Mutiple reactors with internal rotating Reactor material: Q245/Q345 Boiler plate

Applications Testing PAHs in Soil

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Sitelab's UVF-3100D analyzer is used to test soils for polycyclic aromatic hydrocarbons. PAHs are abundant in coal tars, coal ash, creosote and fuel oils.

Processing of Alternative Fuels for the energy industry

by Lindner-Recyclingtech GmbH     based in Spittal/Drau, AUSTRIA

RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

Applications and Air Pollutants Removed in the Energy (Power) Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

Mixers, dryers, innovative solutions for power plant technology

by AVA - Huep GmbH u. Co. KG     based in Herrsching, GERMANY

Conditioning of Ash and Dust

No matter where ash and dust accumulate, AVA continuous or batch mixers can condition them to a transportable final product for disposal or recycling. The applications range from power plant ash derived from lignite, hard coal, biomass, or waste incineration power plants to filter dusts from steelworks and coking plants through to special applications such as hot or reactive ashes from various processes, such as shale oil production.

Pyrolysis oil to diesel

by Pyrolysis plant for recycling waste tyre/plastic     based in Henan Province, CHINA

Pyrolysis oil to diesel continuous waste pyrolysis oil to diesel Solution: Oil refining machine Applicable: Tire oil, Plastic oil, Waste oil, Pyrolysis oil,Engine oil, Black oil, Heavy oil, etc Output: 85-90% good clean oil, the rest is slag and waste gas Heating fuel: Coal / wood/ fuel oil / gas Oil refining machine land size: 20X15m Reactor material:Q245/ Q345 Boiler plate

Water treatment for power plants

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

Activated Carbon Filtration for the Water Filtration Industry

by General Carbon Corp.     based in Paterson, NEW JERSEY (USA)

General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


Industrial briquette presses for Wood briquetting

by WEIMA     based in Ilsfeld, GERMANY

No matter where wood chips come from, whether it is hard or soft wood, chipboard, MDF, plywood, wood shavings, saw dust or swarf: volume can be reduced by up to 90 %. This is particularly attractive to the furniture industry, saw mills and cabinetmaking. With briquette presses from WEIMA, now valuable wood waste can be processed to compact briquettes and sold or used as an own heating source. In general, briquettes have a high calorific value, much higher than regular firewood and comparable to brown coal brought about by a longer and more even burning process. By the way, less ash is also produced.

Fly Ash - Industrial Vacuum

by Vac-Con, Inc.     based in Green Cove Springs, FLORIDA (USA)

Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

by eFACTOR3 LLC     based in Pineville, NORTH CAROLINA (USA)

Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

Wastewater treatment solution for the mining & power generation industries

by Schwing Bioset, Inc.     based in Somerset, WISCONSIN (USA)

From the remote Canadian wilderness to the mountainous regions of South America, Schwing Bioset piston pumps are called upon for reliable service in some of the harshest environments on the planet to pump tailings to surface and sub-surface disposal. Schwing Bioset Fluidized Bed dryers and conditioners are trusted when reliability and performance are a must to process coal at your power generation facilities. Schwing Bioset piston pumps can be used to pump wood waste, coal slurries and fly ash at ethanol and power stations to simplify material handling requirements.

Wastewater treatment solution for the industrial industries

by Schwing Bioset, Inc.     based in Somerset, WISCONSIN (USA)

Schwing Bioset, Inc.`s technical expertise and innovative approach to the design of Fluidized Bed dryers, coolers, and conditioners has resulted in Schwing Bioset fast becoming a preferred partner of companies processing municipal solids and companies processing coal. The versatility of Schwing Bioset`s piston pumps allow them to be used in many industries to pump a wide range of materials such as oil sludges, dredging spoils, food wastes, and coal slurries. In fact, Schwing Bioset pumps are so versatile they can pump just about anything that can be fed into them.

Gas Sensing for Gasification

by Edinburgh Instruments Ltd     based in Livingston, UNITED KINGDOM

Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

Combustible Aluminium, Titanium and Magnesium Dust Collection

by DiversiTech     based in Montreal, QUEBEC (CANADA)

The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

Related Terms for coal waste

Need help finding the right suppliers?

Let the XPRTs do the work for you