Only show results available in Virginia? Ok

cogeneration Applications

  • Wood Cogeneration for Industry

    Any company that has a need for both heat and power is an ideal fit for the Borealis wood power system, especially if located in a rural setting where energy costs are high. The application requirement must be for the full 45 kWh of power for immediate use. If power requirement is not that high, then this energy can be sold to the regional power grid often at preferred rates. Options for off-grid solutions are being reviewed.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Wood Cogeneration for Farms

    Farming operations that require heat also benefit from the CHP system. The return on investment will vary dependent on whether there is low or no cost access to wood chips and whether the 45 kWh of power can be fully utilized on site or, if not, what rate the power can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Wood Cogeneration for Rural Communities

    Small rural communities or work camps are ideal applications for the Borealis wood power plant. Its application fit is best when the heat can be used to support a micro-heating-network for 25 homes or fewer in conjunction with a community centre as base load. Power needs must exceed the 45 kWh or it can be sold to the grid.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Wood Cogeneration for Greenhouses

    Greenhouse operations have been early adopters of the CHP system given their operation’s need for heat. The return on investment is dependent on the regional rate for selling the power to the grid and also the utilities saved from CHP heat.

    By Borealis Wood Power Corp. based in Burlington, ONTARIO (CANADA).

  • Organic Rankine Cycle for Biomass Cogeneration

    Cogeneration plants with Turboden ORC can produce heat from biomass and electrical power from biomass with high efficiency and user friendly operation. The generated power usually ranges between 200 kW and 15 MW electric.

    Is it suitable for you?

    • Local utilities feeding district heating
    • Large sawmills
    • Pellet manufacturing companies
    • Manufacturers of MDF / OSB panels
    • Greenhouses
    • Wine industries

    By Turboden srl based in Brescia, ITALY.

  • Premium

    Industrial solutions for power and cogeneration industry

    WesTech engineers water and wastewater process solutions for the power industry including water pretreatment, cooling tower makeup water treatment, and ultrafiltration pretreatment to reverse osmosis, guaranteeing SDIs less than 3. ISO 9001:2008 certified and turnkey experienced, WesTech stands ready to meet deadlines and assure minimal downtime with focused service.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Cogeneration (digester & landfill gas) flow solutions

    As an industry leader in Clean Energy flow applications, our thermal mass flow meters are used extensively in measuring digester and landfill gas, making electricity from waste.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow measurement instrumentation for waste water treatment flow solutions

    With its high turndown and direct mass flow, our immersible thermal meters are the instrument of choice for measuring aeration basin air flow and monitoring digester gas. Our vortex meters are used to measure steam in the cogeneration processes, while our ultrasonic flowmeters are used for influent and effluent measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Reliable Shredding Technology for Residual Timber Utilization

    Our reliable wood shredders ensure the production of a homogeneous granulate for your in-house wood chip furnace, biogas plant, biomass co-generation plant and also the production of wood briquettes. Regardless of how you are planning to use the wood chips, we will configure the wood shredder exactly according to your needs. We offer you a large selection of wood shredders with various working widths, rotor diameters and drive capacities. The possible granulate sizes usually range from 12 to 80 mm. Regardless of whether you need a compact, small system or have specific needs, we will always find the right solution for you! Capitalize on our reliability! We provide a 3 year carefree warranty on all our UNTHA wood shredders.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Waste Treatment for Waste Preparation

    Material sorting and preparation is essential for effective product valorisation. Aware of this aspect, MĂ©nart has participated in pioneering projects, equally in the preparatory stage of diverse organic waste destined for biogaz valorisation, through composting or co-generation, and in the sorting of household and industrial waste to be recycled, for example, for combustible waste.

    By MENART based in Dour, BELGIUM.

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Evaporators technology for waste & recycling industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you