Only show results available in Virginia? Ok

combustion efficiency Applications

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Premium

    VOC and HAP Abatement

    As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat recovery. The harmful air pollutants are converted to heat, water vapor and carbon dioxide, creating a destruction efficiency greater than 99%.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Reliable Shredding Technology for Rubber and Tyres

    Our shredding systems generate granulate from the hardest rubber and old tyre applications for your recycling plant. Regardless of whether you want to use the granulate for pyrolysis, hydrolysis or combustion, we will customize it to exactly fit your needs. Regardless of whether rubber accumulates in the form of tyres, conveyor belts, rubberised chains or as production waste, recycling is economically efficient and makes sense from an environmental perspective. Very powerful shredders are required to recover recyclable materials from rubber waste and old tyres. Our proven and reliable 4-shaft technology is particularly suited in this regard. This system economically performs the pre- and re-shredding in just one step.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • INFERNOFUEL

    INFERNOFUEL COMBUSTION ENHANCER IS A GREEN ECO sustainable enhancer to combust more efficiently for all carbon fuel diesel, petrol and bunker fuel. Infernofuel reduces fuel consumption, reduces ghg, and mitigate climate change. Infernofuel is a substitute for MTBE in all gasoline or petrol.

    By PRC Global Pte.Ltd based in Singapore, SINGAPORE.

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Waste shredding for the waste-to-energy industry

    With worldwide focus on recovering the maximum waste-to-energy possible, waste processing is an important growth market for stationary shredder technology. Numerous technologies now exist to produce fuels and energy from waste. Incineration is the most common waste-to-energy conversion but to maintain a consistent flow, increase combustion efficiency and reduce costs, it is essential that the waste is pre-shredded.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Primary air control for coal-fired power plants

    Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty `Fly Ash` laden air.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • CH4 Monitoring in Air

    CH4 (Methane) is a colorless, odorless natural gas that is used in a wide variety of industrial applications such as power generation and chemical production. It is also a byproduct of many biological and geological processes, fracking, and gas drilling. It is highly flammable and creates amounts of carbon monoxide as its combustion byproduct. Methane needs constant monitoring in waste water treatment (for co-generation) and to ensure proper process control (e.g. to determine burning efficiency). A quality CH4 analyzer that is able to provide continuous monitoring is a perfect solution for this.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Cement & Lime Industry Emissions Analysis & Monitoring

    A key issue in the measurement of the products of combustion in Cement and Lime industries is the high levels of particulates. The Procal 2000 in situ analyser`s heated probe option is especially suited to this industry as it efficiently deals with variations in process temperature, keeping the probe above the sample dew point and safe from corrosive condensate.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • CO2 / CO Monitoring in Air

    CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Flares for Safe Disposal of Waste & Toxic Gases

    Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Secundary air flow measurement for power generation industry

    Secondary Air Flow Overview: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Accurate secondary air flow measurement to the burners is critical for maintaining the proper air to fuel ratio, result­ing in more complete and stable combustion, better performance and lower emissions. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements including large ducts, limited metering runs, poor velocity and temperature profiles, vibration and high temperatures.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

    Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you