Only show results in Virginia? Ok

compliance requirement Applications

  • EHS Compliance Center

    The EHS Compliance Center is a secure cloud-based comprehensive environmental, health, and safety solution that adapts to match organizational requirements.

    By JNH Environmental Services, Inc. based in VERMONT (USA).

  • Premium

    Intelligent compliance solutions for retail industry

    Retailers are increasingly challenged with meeting EHS regulatory compliance obligations and an intense consumer demand for safer, more environmentally-friendly products. Nearly every aspect of a retailer`s business is impacted by EHS compliance, which requires knowledge and expertise that is far from a core skill set possessed by most of a retailer`s workforce. From sourcing products, to distribution and logistics, to employees handling regulated products, to the proper disposal of hazardous waste, a...

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Greenhouse gas monitoring for regulations and compliance consultancy

    Kurz thermal mass flow meters exceed the certification levels required by the Mandatory GHG Reporting regulation and are approved for these applications.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for pharmaceutical industry

    Few industries are regulated as heavily as the pharmaceutical industry. Bringing a new product to market can take years and requires monumental effort. 3E Company stands ready with a comprehensive suite of products and services that can create efficiencies, support product stewardship, mitigate supply chain risk and improve compliance - ultimately shortening the time to get a product on the market.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for flavor, food & beverage industry

    For manufacturers in the flavor, food and beverage industries, changing market dynamics dictate the need for flexibility in meeting complex regulatory and market-driven requirements. Issues range from ensuring ingredient compliance with global regulatory requirements and safety standards, labeling products in diverse markets, generating supplier suitability assessments and collecting information from various stakeholders in the supply chain. Managing these issues while delivering quality products in...

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Flow monitoring for quarry dewatering compliance

    A Greyline AVFM Area-Velocity Flow Meter monitors and data logs water discharged from the Bray Quarry to the South Raisin River. The Quarry is required to measure flow for environmental permit compliance.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Intelligent compliance solutions for chemicals, food contact & cosmetics industry

    For manufacturers of chemicals – which can be broadly defined as anything from specialty chemicals to lubricants, plastics and food contact to cosmetics and more - changing market dynamics dictate the need for flexibility in meeting customers` complex requirements for high performance sustainable products and improving supply chain performance. Delivering quality products in record time is critical, as are optimizing business processes across your enterprise and global supply chain.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • SDS Authoring and Generation

    The SDS Authoring and Generation module manages the creation, distribution, and storage of Safety Data Sheets (SDSs). Designed to meet increasingly stringent regulatory requirements of a number of jurisdictions both domestic and foreign, the module dramatically reduces the cost and liability associated with typical SDS management programs. . By 2015, all SDS documents and labels must comply with the Globally Harmonized System (GHS) classification standards. Features include: • Automatic flagging and documentati...

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Environmental Compliance and Management Services

    CSRware professionals can assist you with getting started on how to identify your GHG reduction goals, how to identify energy, water, waste, chemical and other natural resource data to apply metrics for performance management. We can work with your team to develop survey's, scorecards or other mechanisms to gather the data required to help identify where your organization is at risk of not being in compliance. Our team will determine how to implement software to automate the process for you in order to make...

    By CSRware, Inc. based in San Francisco, CALIFORNIA (USA).

  • Compliance management software for the energy and utilities industries

    Navigating the increasingly complex regulatory requirements can be tough for energy, oil and gas, and utilities companies. In order to effectively manage risk and stay compliant, organizations must establish proactive policies and have a systematic approach to their contracts.

    By Convergepoint based in Houston, TEXAS (USA).

  • RATA Relative Accuracy Test Audit or CAL2 (EN14181)

    An important step of CEMS testing is verifying of gas analyzers linearity : this step is well performed with a 30 steps gas divider. With just one test gas reference and a zero gas (diluting gas), the required 5 or 10 scaled concentrations may be easily produced "just in time". 30 steps dilution are available to allow using test gases with concentration up to 3 or 6 times the gas analyzer span.

    By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY.

  • Premium

    Geosynthetic Lining for Mining Industry

    Geosynthetics are used in construction of various components of modern mining facilities, including process solution ponds, heap leach pads, stormwater containment, wastewater treatment ponds and closures. Harsh environmental conditions provide a challenge to engineers designing the projects. In addition, increasing environmental and cost pressures are requiring lining systems to achieve greater performance levels than ever. GCLs are rapidly becoming a desired component of mining liner systems because of the...

    By Colloid Environmental Technologies Company (CETCO) based in Hoffman Estates, UNITED KINGDOM.

  • Premium

    Monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can...

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Product stewardship

    The WERCS software suite provides more than just SDS authoring software. We provide tools, technology and services to improve your business processes and advance product stewardship. Through our regulatory compliance software, organizations gain efficiencies at multiple levels. Our SARA and VOC/HAPs reporting modules help to streamline environmental monitoring requirements. Raw material and new product introductions are streamlined through our chemical approval process module. We execute all facets of SDS...

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Transportation classification

    The Transportation Wizard module, as well as our robust library of compliance classification rules, allows for a user-friendly and efficient interface that will populate the transportation information required in section 14 of the SDS. Through the wizard mechanism, users can quickly and automatically populate up to 40 various data points, guiding them through a thorough hazard class and packing group determination. By leveraging quarterly updated data, The WERCS software suggests proper shipping names and UN...

    By UL - The WERCS based in Latham, NEW YORK (USA).

  • Premium

    Gas classification module for Industrial & specialty gases industry

    Gas and Specialty Gas Compliance Solution; End-to end Safety Data Sheet solution for industrial & specialty gases in compliance with EIGA, CGA and GHS. Lisam’s ExESS® Gas Classification Module (GCM) specifically addresses the gas classification compliance requirements of GHS. The ExESS® GCM was developed in close partnership with the European Industrial Gases Association (EIGA). As a member of and collaborator with global associations such as the Compressed Gas Association (CGA) and EIGA,...

    By Lisam Systems based in Ecaussinnes, BELGIUM.

  • Premium

    Heat Transfer Equipment for Oleo Chemistry Industry

    Decades of experience in chemical engineering pays off. By using GIG Karasek technology our customers can produce high-quality products from various materials according to the most different industrial requirements. The environmental compliance and the purity of the products are just as important criteria as the energy expenditure with which they are obtained. Hence it is no sheer incident that our plants excel by innovative systems for energy recovery as well as sophisticated process combinations...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA.

  • Premium

    Chemical management software for chemical & specialty chemical industry

    Flexible and intuitive, the ExESS Chemical Management System offers an extended set of functionality, dedicated to optimizing the day-to-day management of chemicals. The chemical manufacturing sector continues to face increasing regulation and compliance measures. Complete visibility is required across the supply chain. As of June 1, 2015, GHS applies to companies manufacturing chemicals in the United States, Canada and globally. Governmental agencies such as OSHA and Health Canada (WHMIS) now require every...

    By Lisam Systems based in Ecaussinnes, BELGIUM.

  • Premium

    Water treatment and wastewater treatment solutions for food and beverage industry

    Food and beverage processing companies have unique challenges requiring advanced food and beverage water treatment and wastewater treatment solutions. These challenges include optimizing water efficiency and exceeding regulation compliance standards. There is typically four main water processes involved in food and beverage processing. These processes are cooling water, process water, boiler feed water and process wastewater. The typical allocation of water used in each process varies by industry, from about...

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you