Only show results available in Connecticut? Ok

compliance system Applications

  • Premium

    Temperature and gas sensing solutions products for industrial electronics

    Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you`re faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction requirements.

    By LumaSense Technologies, Inc., An Advanced Energy Company based in Milpitas, CALIFORNIA (USA).

  • Premium

    Air pollution control for microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Bio-Domes for Small Municipalities

    Wastewater Compliance Systems (WCS) originally developed the Bio-Domes with small municipalities in mind. We understand that as regulations become more stringent not every community can afford to upgrade their facilities to a mechanical plant. Bio-Domes offer the ability to enhance the performance of a wastewater lagoon treatment system at a fraction of the cost of mechanical plants and still maintain compliance. Communities all over the country have begun approaching WCS looking for an alternative that will keep...

    By Wastewater Compliance Systems, Inc. (WCS) based in Lehi, UTAH (USA).

  • Environmental information management

    Efficient environmental information management is the key foundation and basis to any solid environmental program. All too often, seperate databases, individual`s staffs spreadsheets, and other disconnected tools are used to meet the needs of a comprehensive and complex environmental program. This creates a undue burden on environmental professionals while increasing the exposure and risk for non-compliant activities to occur. Perillon`s environmental solutions integrate all major data intensive compliance...

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Fragrance compliance solution for fragrances industry

    Lisam Systems offers an unparalleled compliance solution for the fragrance industry to generate reports, labels and IFRA certificates. Fragrances are subject to an international legislative and regulatory environment that affects every part of manufacturing and the supply chain. The IFRA is a global association that represents world-leading fragrance makers. It sets standards for safe use and manufacture of fragrance materials, and directs a code of practice to further consumer safety and environmental protection.

    By Lisam Systems based in Ecaussinnes, BELGIUM.

  • Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng. based in San Donà di Piave, ITALY.

  • Continuous Stack Monitoring Systems for Ethanol

    As the industry leader in providing continuous stack monitoring systems, Trace Environmental Systems, Inc. is installed at more than 65 ethanol production plants, providing continuous stack monitoring for boilers, T.O./HRSG’s, and CO2 scrubbers. Trace provides both customized CEMS and PEMS to meet the needs of each specific application. With our in-depth application knowledge, we provide trouble-free, reliable, and fully compliant stack monitoring systems and compliance reporting software.

    By Trace Environmental Systems, Inc. based in Sparta, NEW JERSEY (USA).

  • Premium

    Environmental solutions for the automotive - industrial painting and other finishing applications

    Reliability and uptime are essential. Uninterrupted production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. Dürr Megtec has supplied many systems to tier 1 and tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing...

    By Dürr Systems, Inc. based in De Pere, WISCONSIN (USA).

  • Safe Drain ™ Deicing Capture Storm Drain Insert

    Aviation facilities around the world are protected by the Safe Drain™ system, capturing spills, deicing fluid, FOD and contributing a key component of the SPCC plans. No other product is more effective at capturing spills or has been in place longer than the Safe Drain™ System. Have Peace of Mind and compliance with the proven and Patented Safe Drain™ System 100% containment.

    By Safe Drain Stormwater Holdings, Inc based in Oakdale, CALIFORNIA (USA).

  • Premium

    Extraction of many emission sources in extensive factory premises

    Example: Packaging. Similar tasks: Coating, Automobile industry, paint production.Different production processes lead to decentralised ventilation of emission sources. These decentralised ventilations are consolidated within a central air pollution control system.

  • Online monitoring solutions for the determination of chlorinated organics in water

    Determining chlorinated organics in waste water of the oxychlorination process is for reasons of environmental compliance. The on-line analyzer system uses a scrubber system where a carrier flow is bubbling through the water. The vapor phase is measured by a Flame Ionization Detector (FID) and is a measure for chlorinated organics of the water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Gas analyzers and monitoring systems for Compliance measurements

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires significant...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Premium

    Continuous Metals Stack Monitor (CEMs)

    Cooper Environmental`s Xact® 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Our systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.

    By Cooper Environmental Services based in Tigard, OREGON (USA).

  • Premium

    Algae control products for water and wastewater treatment applications

    Plaguing algae can cause issues in wastewater facilities such as increased pH, as well as high BOD and TSS, causing discharge issues, and pushing permit limits. Ultrasound technology can help reduce the algae, therefore lowering fines and compliance concerns.

    By SonicSolutions Algae Control LLC based in Northampton, MASSACHUSETTS (USA).

  • Determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-IR spectroscopy

    Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Intelligent compliance solutions for healthcare industry

    Providing high quality patient care gets tougher all the time, thanks to increasing cost pressures and an ever-changing compliance landscape. Verisk 3E`s powerful suite of outsourced services can be tailored to assist any healthcare organization in maintaining compliance and improving EHS performance. Our services have been proven to deliver cost savings for satisfied healthcare companies across the globe.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This...

    By Titan Cloud Software, LLC based in Brentwood, TENNESSEE (USA).

  • Process Design

    Custom water and wastewater engineering, consulting and process design services to prevent air, land, water and environmental pollution. We rework systems as processes change and troubleshoot where necessary to bring systems into compliance. • High purity and process water • Biological nutrient removal • Solids treatment • Toxicity reduction • Industrial treatment • Advanced oxidation and alternative disinfection • Effluent reclamation and reuse • Land application systems • Natural treatment systems •...

    By Yates Environmental Services based in Spokane, WASHINGTON (USA).

  • Meteorological systems for environmental monitoring

    Climatronics has supplied meteorological systems for environmental monitoring and regulatory compliance for over 35 years. Our accurate, responsive, yet rugged sensors, coupled with high-power data loggers, provide users with the ability to make measurements on multi-level towers, multiple tower networks, and single sites, which comply with EPA, NRC, and international regulatory requirements.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you