Only show results available in Virginia? Ok

condition monitoring system Applications

  • Water measurement systems & sensors for status & condition-based monitoring

    We offer a variety of telemetry based solutions to monitor and control assets:

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for industrial manufacturing

    Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other machinery.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for pulp & paper

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for pulp and paper companies. An effective oil analysis program will keep important manufacturing assets such as pumps, gears, bearings, compressors, engines, hydraulic systems and other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for marine

    Overview

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the marine industry. An effective oil analysis program will keep important assets such as engines, gearboxes, hydraulic systems, turbines, compressors, generators and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled down time.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for metals processing

    Overview

    Metals processing industries employ large, critical assets, the reliability of which is absolutely essential to their business model. An undetected failure of a piece of processing equipment such as a rolling mill gearbox, or a 1000 ton extruder press not only involves the cost of equipment repair and line downtime, but the product quality may be severely impacted. Today more than ever, there is also less redundancy. Oil analysis is a critical aspect of a reliability based maintenance program, and for many large slow speed systems, it is the first line of protection. Spectro’s oil analysis solutions are designed to monitor this critical oil lubricated machinery, and provide the asset owners with timely information for reliability decision support.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for aviation, aerospace & airlines

    Overview

    Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development and testing.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Tunnel Structural Health Monitoring Systems

    Structural Health Monitoring allows rapid assessment of a tunnel’s state of health and such approach is becoming recognized as an appropriate mean to increase the safety and optimize operational and maintenance activities of tunnels. Data resulting from the monitoring program is used to improve the operation, the maintenance, the repair and the replacement of the structure based on objective results. Detection of ongoing damages can be used to discriminate deviations from design performance. Malfunctioning tunnels can often have serious consequences. The most severe are failures involving human victims. Even when there is no loss of life, populations suffer if the structure is partially or completely out of service. Learning how a tunnel performs in real conditions will help design better structures for the future. This can lead to cheaper, safer and more durable structures with increased reliability, performance and safety.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Pipeline Monitoring Systems for Health Monitoring

    Pipeline management presents challenges that are quite unique. Their long length, high value, high risk and often difficult access conditions require continuous monitoring as well as an optimization of maintenance interventions. The main concern for pipeline owners comes from possible leakages that can have a severe impact on the environment and put the pipeline out of service for repair. Leakages can have different causes, including excessive deformations caused by earthquakes, landslides or collisions mobile objects, corrosion, wear, material flaws or third party intrusion.

    By Roctest - part of Nova Metrix LLC based in Saint-Lambert, QUEBEC (CANADA).

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Noise monitoring solutions for vibration testing

    Vibration testing is is used for aerospace and defence testing, ground transportation, transport simulation, package testing, altitude simulation and more. Our comprehensive range of LDS electrodynamic shakers are designed for vibration testing of devices of any size - from a semiconductor component to a complete satellite system, to see how it will stand up to real-world conditions. With an LDS vibration test system your shaker, power amplifier, vibration controller and even environmental chamber are not only controlled from one PC, they run under one software package. Combined with data acquisition systems and analysis software suites, Brüel & Kjær ofers the complete vibration testing solution to establish proof of quality according to national and international standards, such as DIN, ISO, BS, MIL, IEC and ASTM.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE.

  • Traffic Emissions Monitoring

    Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution. Roadside pollution concentrations can change quickly as types and volume of traffic changes and so instrumentation used must be able to cope with these rapidly changing conditions. Ecotech has established a wide variety of roadside monitoring stations incorporated both into large walk-in style shelters to compact monitoring shelters. Our solutions can be tailored to your needs. Ecotech`s compact solution uses a compact monitoring shelter fitted out with a variety of analyzers and particulate monitors. These analyzers offer fast response, minimal maintenance and are widely used for roadside monitoring.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Large pipes & ducts, hot tapping, purging flow solutions

    The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    PTR-TOFMS systems for automotive real-time vehicle exhaust analysis

    Monitoring exhaust gas from combustion engines, emitting a large number of different compounds and with rapidly changing concentrations due to variations in operating conditions, necessitates an instrument that measures in real-time and with high sensitivity – an IONICON PTR-TOFMS.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Thin-film Measurement Technology for Automotive Industry

    With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of cabin conditions.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you