Only show results available in Virginia? Ok

conductivity analyzer Applications

  • Premium

    Instruments and analyzers for thermal conductivity in floor heating systems

    Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Analysis of VOC compounds in water by Purge & Trap or dynamic headspace

    Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA –...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Online monitoring solutions for determination of hydrogen in gas vent

    Levels of of hydrogen in the gas vent of the HCl burner can be measured by means of AppliTek’s thermal conductivity analyzer system. The analyzer system is suited for use in hazardous environments and meets ATEX or NEC500 compliance standards.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of hydrogen in hydrogen feed

    Levels of of hydrogen in the hydrogen feed of the HCl burner are reliably measured and controlled by means of AppliTek’s thermal conductivity analyzer system. The analyzer system is suited for use in hazardous environments and meets ATEX or NEC500 compliance standards.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of hydrogen in dry chlorine

    Levels of hydrogen in dry chlorine are monitored in hydrochloric acid synthesis by means of AppliTek’s multi-wavelength IR analyzer system. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to control a specific part of the burner, by using techniques such as multi-wavelength infrared, thermal...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of iron in hydrochloric acid

    Levels of iron in liquid hydrochloric acid (HCl) are precisely monitored by means of the EZ-HCl analyzer system. Iron oxides that dissolve in the HCl can lead to the formation of ferrous chloride (FeCl2) and compromised purity of the end product. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for the determination of chlorine in dry chlorine

    Levels of chlorine in dry chlorine in hydrochloric acid synthesis are monitored by means of AppliTek’s multi-wavelength UV analyzer system. Hydrochloric acid or HCl is one of the primary products of the chlor-alkali industry and commonly produced by the exothermic reaction of hydrogen and chlorine inside a burner. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control HCl...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

    A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Water quality monitoring systems for feedwater, storm & condensate industry

    The most important parameters in Water/Steam Cycles such as Cation conductivity, dissolved oxygen and pH are available as pre-assembled and factory tested units. Dedicated analyzers for sodium, silica, phosphate and hydrazine are also factory tested and calibrated for immediate operation.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Independent particle characterization services for dietary supplements

    Concurrent with the U.S. Food and Drug Administration’s final rule establishing regulations to require current good manufacturing practices (cGMPs) for dietary supplements, PTL can offer cGMP services to all supplement manufacturers. PTL has sustained its FDA registration since 1994, which involves rigorous inspections by FDA every 2 years or sooner. According to the final rule, proper controls must be in place for dietary supplements to be produced in a consistent manner for identity, purity, strength, and...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you