Only show results in Virginia? Ok

conductivity testing Applications

  • Premium

    Instruments and analyzers for thermal conductivity in floor heating systems

    Understanding of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating systems. Thermal conductivity can be improved when for multilayer constructions materials are optimized.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Boiler Water Testing / Cooling Tower Water Testing

    Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Horticulture

    Modern growing practices include scientific evaluations of soil, water, fertilizers, diseases, etc. While some tests are best performed by a laboratory, others can be easily conducted on location, saving time and money. Three tests in particular, EC, pH, and ALKALINITY, can reveal valuable information about water quality, soil salinity, and fertilizer concentration. MyronL Company’s portable AGRI-METERS provide you with a simple, fast, and accurate means of testing these parameters.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Analysis of VOC compounds in water by Purge & Trap or dynamic headspace

    Context & Challenges Volatile organic compounds (VOC) can be dissolved in water. Sometimes water is polluted and to study contamination of VOC in finished drinking water, VOC must be measured. Chromatotec® Solutions Chromatotec® has developed a specific system for the measurement of VOC in water: a Purge & Trap system, the airmoPURGE. The analyzer is coupled with a degasing system allowing the extraction of dissolved gases. The complete system is based on: - 502.2 method from US EPA –...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Premium

    Testing Fume Hood Flow Dynamics using SF6 as a Tracer Gas

    A safe laboratory environment requires an effective method for clearing toxic material from fume hoods. Since all handling of toxic materials is completed in these hoods, it is critical to have a procedure to evaluate their operation to assure adequate protection for laboratory workers. The InfraRan Specific Vapor Analyzer, factory calibrated for SF6, is an ideal instrument for measuring fume hood efficiency in accordance with ASHRAE and other standards. Manufacturers identify the flow dynamics (factors that...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Stack Testing for Power Generation Plants

    POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Laboratory Weighing - Moisture Content Determination

    The moisture content influences the physical properties of a substance such as weight, density, viscosity, refractive index, electrical conductivity and many more. Chemical, thermogravimetric or loss on drying techniques are used to determine this content.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Laboratory Analytical - Moisture Content Determinations

    The moisture content influences the physical properties of a substance such as weight, density, viscosity, refractive index, electrical conductivity and many more. Chemical, thermogravimetric or loss on drying techniques are used to determine this content.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Online monitoring solutions for determination of hydrogen in gas vent

    Levels of of hydrogen in the gas vent of the HCl burner can be measured by means of AppliTek’s thermal conductivity analyzer system. The analyzer system is suited for use in hazardous environments and meets ATEX or NEC500 compliance standards.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of hydrogen in hydrogen feed

    Levels of of hydrogen in the hydrogen feed of the HCl burner are reliably measured and controlled by means of AppliTek’s thermal conductivity analyzer system. The analyzer system is suited for use in hazardous environments and meets ATEX or NEC500 compliance standards.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for the determination of chlorine in dry chlorine

    Levels of chlorine in dry chlorine in hydrochloric acid synthesis are monitored by means of AppliTek’s multi-wavelength UV analyzer system. Hydrochloric acid or HCl is one of the primary products of the chlor-alkali industry and commonly produced by the exothermic reaction of hydrogen and chlorine inside a burner. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control HCl...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of hydrogen in dry chlorine

    Levels of hydrogen in dry chlorine are monitored in hydrochloric acid synthesis by means of AppliTek’s multi-wavelength IR analyzer system. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to control a specific part of the burner, by using techniques such as multi-wavelength infrared, thermal...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of iron in hydrochloric acid

    Levels of iron in liquid hydrochloric acid (HCl) are precisely monitored by means of the EZ-HCl analyzer system. Iron oxides that dissolve in the HCl can lead to the formation of ferrous chloride (FeCl2) and compromised purity of the end product. With increasing concerns over safety and efficiency in the chlorine manufacturing processes, AppliTek has investigated the use of proprietary on-line analyzer systems to monitor and control the HCl synthesis. Each of these on-line analyzer systems has been selected to...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Stack Testing for Rod Mill Exhaust Stack

    STEEL INDUSTRY: Conducted particulate testing and continuous emission monitoring of a rod mill exhaust stack. In addition, testing was performed to determine emissions associated with a slow cooling pen associated with ball mill production.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Saran Bag application

    Title : Preliminary Sampling Methodology and Analytical Procedures for Ambient Sulfur Hexafluoride, Corporate Author : ARMY MEDICAL ENVIRONMENTAL ENGINEERING RESEARCH UNIT EDGEWOOD ARSENAL MD Personal Author(s) : Luckan,Susan K. ; Cooper,William J. Report Date : JAN 1973 Pagination or Media Count : 23 Abstract : A preliminary evaluation of techniques of sampling and gas chromatographic analysis for low levels of sulfur hexafluoride was conducted to determine the most feasible method for available equipment....

    By Analytical Specialties, Inc. based in Elburn, ILLINOIS (USA).

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Stack Testing for Cement Production Facility

    LIMESTONE AND CEMENT PRODUCTION INDUSTRY: Conducted a facility-wide evaluation and NSPS performance test program of a major limestone and portland cement production facility.

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Wireless multiple parameter monitoring

    Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate...

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Premium

    Water quality monitoring for the groundwater monitoring industry

    The reasons for testing water quality in groundwater are numerous. Monitoring water quality and conducting tests is a good way to gather data on aquifer hydraulics. It can also be used to monitor parameters such as rhodamine, which helps to understand movement of underground water. Human activities can have an impact on groundwater quality, and conducting tests in this field can help to track these effects. Leachate from landfill and fertiliser can both find their way into groundwater. It is important to monitor...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you