Only show results available in Virginia? Ok

containment technology Applications

  • Construction of Containment Structures

    Manufactured synthetic lining products have allowed for efficient design and construction of containment structures such as ponds, lagoons, landfills, tanks and secondary spill containment facilities, including vapour management systems. Because of the wide variety of project conditions and materials being contained and with so many liner types to choose from, the design and selection of the appropriate lining materials can be a complex task.

    With over 25 years of experience in geomembrane containment technology, Nilex offers design assistance, fabrication, installation and construction services for containment applications. The Nilex containment technology process involves compatibility testing and the consideration of facility design and climatic factors.

    Nilex professionals will work with the owner, engineering consultant and the general contractor to ensure the optimum design with the most efficient and cost-effective installation for the containment application.

    Learn more about our products and services for Primary Containment, Secondary Containment,Tank Lining, Vapour Management Systems, Installation Services and Covers.

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Disposable soil headspace testing container

    The OVT container is an innovative product and a highly effective tool for the preliminary testing of media/soils that have been impacted by a wide variety of volatile organic contaminants of concern (COC’s). • No preparation or modification needed prior to use in field • Air tight OVT lid has built in sealed sampling ports of varying sizes to accommodate different size OVA probes. • Lids snap together so all samples from one well/boring can be easily grouped together. • Reduced potential for injury to employees due to non-breakable material, lighter carrying weight and no sharp cutting edges as on aluminum foil boxes or use of razor knives; • Lid is recyclable & container is made from an environmentally friendly biodegradable material (corn-based) ; • Disposable container reduces potential for cross-contamination of samples (creating invalid data) due to washing and reusing mason jars from multiple sites; • The OVT cell can be purchased on-line and shipped directly to your office or obtained at a local equipment rental location. • Granted a USPTO patent and accepted by the Florida Department of Environmental Protection-BPSS as an Innovative Technology.

    By OVT Environmental Products based in Cape Coral, FLORIDA (USA).

  • Premium

    Reliable Shredding Technology for Electronic Scrap

    Our customized solutions enable you to efficiently shred electronic scrap in your recycling facility and they align perfectly with your recycling system. The granulate size is adjusted such that metals and non-metals can be separated and recycled as best as possible. More than 40 million tons of electrical and electronic scrap are generated annually – and the trend is growing dramatically! Recycling electronic devices is not just beneficial for environmental reasons. This scrap, as a rule, contains many precious metals that are recovered during the recycling process. To ensure a high yield during the recovery process, the shredding should generate only a very low amount of fine particles.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Hospital Waste

    Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Reliable Shredding Technology for Refuse Derived Fuels (RDF)

    Our shredding solutions enable you to optimally recycle waste into substitute fuels / alternative fuels and ensure high quality by producing a homogeneous granulate free of foreign objects. The goal of recycling is to use the valuable energy contained in the waste and to substitute the use of fossil fuels. During the recycling process the portions with a high calorific value are separated from the commercial and industrial waste and turned into a marketable product. Depending on the calorific value and the granular size, these fuels are used in fluidised bed combustion, cement plants and substitute fuel power plants.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Industrial Weighing - Counting

    When verifying inventory, packing parts in containers, or confirming production quantities, every part is important. METTLER TOLEDO is the leader in precision parts counting technology ensuring that only the right number of parts are delivered to you or your customer. Our super-precise solutions such as BBK4xx counting scales or the IND690count terminal offer unprecedented counting accuracy.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Drill Cuttings

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry® technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Find more information and the benefits of VacuDry® drill cuttings plants on

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Mining & minerals solutions for acid mine drainage industry

    Through the application of modern mining technologies, WesTech helps to assure that the byproducts of minerals extraction process are made inert, reliably contained and kept from causing environmental damage. Implementation of WesTech tailings processing technology assures protection of the groundwater, surface waters, wildlife and communities which in the past have been the victims of tailings dam leaks and levy failures.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Waste recovery for mining wastes

    Mining waste typically arises from the limitation of the installed technologies of an operation, e.g. where fines cannot be tolerated. They are associated with mine workings and often contain valuable and/or hazardous materials. The hazardous content, which are often the valuable fractions within this waste are typically metals. Spread of metal toxicants in association with tailings particles, through a combination of wind dispersion or if washed into the soil or rivers, can have a highly damaging effect on the environment. Crucially, as time moves on, the mine tailing of one generation become the resource of the next.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Metal Sorting - Non Ferrous Metals Sorting

    Modern sensor-based sorting systems are superior to traditional manual or sink-float processes for reasons including that they achieve material purities of up to 99.9% in refining the sorted fractions. TOMRA Sorting’s efficient sorting and recycling technology provides benefits for shredder machinery and heavy media operators, plus aluminum resmelters. Shredder operators can create individual fractions out of mixed product which yield much higher market values. Heavy media operators can produce and sell pure final products themselves, meaning their investment in technology is recouped quickly. After wet processing, the aluminum product still contains impurities and its concentration can be improved further using TITECH technology and sold for a considerably higher profit. For smelters, the TITECH x-tract [XRT] removes impurities in the secondary resource to such a high degree of precision that less primary resource is needed to obtain useful aluminum.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Metal Sorting - Wire Recovery

    Cable materials were often lost in the treatment and sorting processes available till now, which meant a financial loss due to the high proportion of copper they contain. New sorting technologies such as the FINDER are now capable of detecting these cables. Recently it has become possible to separate metals and copper cables. Previously, cable materials were often lost in the treatment and sorting process. This meant a financial loss due to the high proportion of copper they contain. New sorting technologies such as the FINDER and the FINDER [poly] are now capable of detecting these cables, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Application package raw materials

    Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. However, many laboratories cannot specify exactly what material they have to analyse. Therefore FLUXANA has created a wide range oxidic application program to allow complete analysis of the unknown material. The concentration ranges and elements of interest can be adapted to customer needs. It contains all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG based in Bedburg-Hau, GERMANY.

  • Premium

    Pollutant Decontamination for the Wastewater Treatment Industry

    All described properties of Fe(0) nanoparticles can be even used for decomposition of pollutants contained in the waste water, mainly for treatment of industrial sewage and hutch water. The usage of nanoiron can represent a significant qualitative step in the classical technologies of water treatment including drinking water. The extremely reactive iron nanoparticles thus offer a possibility to solve long-lasting problems with a high content of uranium and arsenic in a variety of localities in the Central Europe. They can be also used for a reduction of the content of heavy metals, nitrates and phosphates in the drinking water. Just these inorganic pollutants, which are hardly or expensively removed by standard technologies, are effectively removed by Fe(0) nanoparticles. 

    By NANO IRON s.r.o. based in Rajhrad, CZECH REPUBLIC.

  • Wastewater treatment for the biofuels

    In these companies, the water to be treated can vary depending on the technology used and on the raw materials. These effluents usually contain high concentrations of contaminants, especially those coming from esterification processes.

    By Aguambiente based in La Cistérniga, SPAIN.

  • GIS software for water resource industry

    GIS is a powerful tool for developing solutions for water resources such as assessing water quality and managing water resources on a local or regional scale. Hydrologists use GIS technology to integrate various data and applications into one, manageable system. The suite of tools contained in Arc Hydro facilitate the creation, manipulation, and display of hydro features and objects within the ArcGIS environment.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Industrial water TOC and Color removal from water

    All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM`s when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride cycle. Because the organics can be removed by regeneration with brine, this technology is far most economical.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Geo Bags

    Geo Bags have the following advantages : -Affordable price with global standard specification -Available Ex-stock or fastest delivery, avoid blockage of money against container load Staggered delivery for sizable quantity acceptable. -In compare to conventional erosion protection work using C.C. Block, gravel, hard rock etc, sand filled geobags technology involves less cost. -World widely it has been seen that erosion protection work using Geo bags requires less installation and maintenance cost light weight equipment, less space for construction works, transportation cost, less energy requirement. -The constructing materials like sand of geo bag are locally available and cost-effective compared to importing boulders from other countries. -The manufacturing of geo bags and quality control of the bags are easy compared to the C.C. blocks and boulders.

    By Manas Geo Tech India Pvt. Ltd. based in New Delhi, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you