The global economy and success of contaminated site characterization and remediation projects and the environmental exposure are strongly impacted by the quantity of material to be excavated, treated, then re-used or eliminated. Appropriate data acquisition, reliable mapping, precise waste categorization, and uncertainty assessment are key issues for achieving successful projects.
Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for...
The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.
Use iSorb at major remediation and construction sites where excavation of contaminated soil or draining of ponds can release unpleasant odors or hazardous VOCs. Spraying a thin-viscosity MioGel onto newly exposed soil or stockpiles of contaminated material keeps vapors in, provides a safe environment for workers, and protects the public from toxic fumes.
BioSolve Pinkwater is used at major remediation and construction work-sites where excavation of contaminated soils may release noxious organic odors or hazardous VOCs. The dilute solution is sprayed directly onto newly exposed soil surfaces or stockpiles of contaminated material where volatilization is taking place. Used as an alternative to foam, Pinkwater creates a barrier that keeps vapors in the soil, allowing work to continue safely without disruption to workers or neighbors.
Delta had been contracted during the 2014 remediation at the well site to apply their bioremediation process to excavated and stockpiled soil contaminated with Fraction 2 petroleum hydrocarbons (F2 PHC). Soil sample results from a 2014 Phase II ESA showed F2 PHC concentrations ranging from 170 mg/kg to 1210 mg/kg, with an average of 586 mg/kg in the four samples from the disposal area. Delta was on the site for around 10 hours using their hopper and amendment sprayer machine to treat the approximately 600 cubic...
Maximize ROI and Market Value of Brownfields Properties
TerraTherm provides rapid, thorough, and predictable remediation of Brownfields property. Our in situ thermal processes can ensure rapid closure, avoid delays, eliminate uncertainty, avoid excavation, and optimize property value. In situ thermal remediation is a reliable, lower risk, and less disruptive way to achieve your remediation goals.
Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as environmental chemistry and acid mine drainage, below is an excerpt of the laboratory’s current scope of accreditat...
Sitelab's UVF-3100D is used to test soil to help investigate and clean up sites contaminated by above ground or underground storage tanks (USTs). Soils can be analyzed for extended diesel range organics (EDRO) or extractable petroleum hydrocarbons (EPH). Results correlate well to confirmatory lab methods.
Need to eliminate iron bacteria? Need to remove Hydrogen Sulfide? Oxidize iron and manganese?. Bio-hydrox is a non-toxic Chlorine alternative advanced oxidation product certified NSF/ANSI 60 and available in the USA market since 2013. It is sometimes called “liquid ozone” because it acts similar to ozone when reacts with water.