Contaminated Waste Applications on Environmental XPRT

Premium

Very large waste gas volumes with low contaminant concentration

The CTP desorption allows for an especially high concentration factor which, in turn, reduces the cost of ownership and permits an auto-thermal operation (additional burner switched off) even when the contaminant concentration is low.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

Premium

Industrial wastewater solutions for contaminated landfill leachate

Reliable treatment. Optimised for heavily contaminated landfill leachate. Whether it be household rubbish, construction rubble, contaminated soils, port sludge or waste incineration ash, final storage of these heavily contaminated materials poses a potential groundwater pollution risk from heavy metals, nitrogen bonds or organic substances. Landfill leachate resulting from precipitation on landfill sites.

By H2O GmbH based in Steinen, GERMANY.

Waste wood and contaminated wood WID Compliant biomass solutions

Tidy Planet supply 200kw up to 25Mw WID Compliant biomass boilers for the UK market, capable of treating 0-10mm fines of grade C Waste wood without pelletising, or further refining the material to remove contamination / plastics. The WID Plants can be specified with high efficiency ORC electricity generation and come with the very highest level pollution and emissions control. The plant can also be used for other waste materials such as AD Digestate and AD screened contamination and compost oversize.

By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

Premium

Several waste gas streams: Highly contaminated oxygen-free waste gas,|and medium waste gas stream

Explosive oxygen-free waste gases are disposed of and contribute to the oxidation process of the contaminants.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

Premium

Contaminated Water Filtration

Industry standard best practices are designed to ensure that all work done on Asbestos Abatement Projects is done to the highest level of safety and risk management. Containment of the generated waste water fibers and debris is critical to proper compliance and worker safety. If these fibers are not captured and contained, they can be very harmful for the environment, on-site workers and the occupants of neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. Water from showers at Asbestos Abatement sites is often contaminated with asbestos fibers from washing protective gear and equipment. This water must be filtered prior to discharge into a drain.

By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

Premium

Reliable Shredding Technology for Hospital Waste

Our shredding machines are perfectly suited for the chemically aggressive material in your hospital waste. After the shredding process, the material can be optimally utilised thermally or disposed of together with municipal solid waste once it has been sterilised. The shredding is so effective that the granulate does not give any indications of the source material. Hospital waste consists of very different types of waste and requires special treatment during disposal due to the presence of infectious and highly contaminated materials. Depending on the waste type or classification, the hospital itself might need to specially treat the waste or store it in dedicated plastic containers or drums on-site.

By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

Handling hospital waste and laundry

Large amounts of hazardous waste, contaminated waste and dirty laundry are handled in modern hospitals, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

By Envac AB based in Stockholm, SWEDEN.

Waste handling in nursing homes

Large amounts of hazardous waste and contaminated waste are handled at modern nursing homes, and so hygiene and staff safety are important. This is why it is important to find sustainable waste solutions which do not require waste to be physically touched. This is achieved with the Envac vacuum system.

By Envac AB based in Stockholm, SWEDEN.

Premium

Waste recovery for glass manufacturing

Tetronics` twin torch system has been used continuously for the commercial production of high quality silica glass for optical applications since 1992. Tetronics’ unique twin torch technology allows a plasma arc to be created in space, which enables a falling stream of high quality silica powder to be melted at the junction of the two arcs to form an ingot of high optical quality silica glass. By using plasma as a clean and controllable heat source, the product has a high degree of integrity, because the absence of a natural gas flame means the resulting product is free from bubbles, contamination and other defects.

By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

Premium

Products for plastics recycling

Machines for the dimensional reduction, cleaning and separation of plastics from contaminants (ex. glass, wood, aggregates, etc.).

By Guidetti Recycling S.r.l. based in Renazzo (FE), ITALY.

Premium

Recycling of Incinerator Slag

Incinerator slag mainly consists of mineral components, metal scrap and other unburnt materials. With our separation systems we are able to treat both the untreated ash as well as the mixed and contaminated metal fraction. Out of both fraction we can recover a clean aluminum and a heavy metal fraction.

By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

Premium

Recycling Systems for the municipal solid waste processing sector

MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

By Macpresse Europa S.R.L based in Vernate, ITALY.

X-ray fluorescence XRF analysis for environmental protection and waste management

To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

Air pollution control (APC) equipments for waste incineration

Waste incineration is a complex area. The mix of waste, moisture content, temperature of the waste, surrounding air and a variety of other factors interact and affect which residues are formed. Combustion entails often a gas consisting of heavy metals, sulfur oxides, chlorides, dioxins, etc. It is extremely important with a proper handling of the gas and the task often requires a mixture of wet and semi-dry treatment. EnviBAT offers equipment that brings particle levels down to extremely low levels, which guarantees a total separation of dioxins and wet purification that separates contaminants found in the gas phase.

By Envibat AB based in Skellefteå, SWEDEN.

Decanter centrifuge & cuttings for drilling waste management & disposal

Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

Premium

Waste recovery for energy & utilities

In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

Quarantined and International Waste

Medical (Healthcare) Waste. Bio-hazardous waste. Pathological Waste. Cultures and stocks of infectious agents and associated biological agents. Liquid human and animal waste, blood and blood products and body fluids. Contaminated waste from animals. Sharps. Anatomical. Quarantined waste (airport and border protection). General waste (i.e. kitchen waste, etc.).

By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

Premium

Shredding and crushing systems for Food waste and handling of garbage and food waste

Organic waste can become a problem anywhere where the disposal of waste occurs over a longer period. This challenge arises for example in the shipping industry. With Mercodor waste food shredders valuable space is saved and food protected from contamination. The processed food leftovers serve as the raw material for biodiesel production or are used for the production of green energy in the form of electricity and heat from biogas plants.

By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

Patented Waste Water Recovery System for Marine Refinishing Industry

Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

By GEOMAT based in Tampa, FLORIDA (USA).

Premium

Thermal waste gas purification of siliceous organic compounds

The cleaning problem of the heat exchangers was solved. The contaminants were destroyed efficiently and economically while steam for the production process was generated at no additional cost.

By Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control based in Graz, AUSTRIA.

Subscribe to our eBulletins

Add Supplier Profile