Only show results available in Virginia? Ok

cooling technology Applications

  • Innovative Pump Technology for Cooling and Refrigeration Industry

    Transporting cold liquids in cooling and refrigeration systems places high requirements on the pump used. For reliable, constantly high pump performance the pump has to be designed accordingly, dimensioned specifically for the application and fitted with special equipment for the low temperatures.

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher concentrations for maintenance cleaning purposes of fouled heat exchangers, cooling water loops and process water loops. Performing an occasional shock cleaning of a heat exchanger with hydrogen peroxide can remove buildup from surfaces and can result in improved heat transfer efficiency. By removing surface fouling, hydrogen peroxide may also improve the efficiency of other biocides such as bleach, bromine and non-oxidizers.

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Ice blasting technology for plastics

    Applications of Coulson Ice Blast in the Plastics sector:

    Ice
    • General Mold and Tool cleaning
    • Injections Molds
    • Compression Molds
    • Blow Molds
    • Urethane Molds and Overspill
    • Plate out and off-gasing
    • Textured Molds and Embossing cooling rolls
    • Thermoform Molds
    • Extrusion dies
    • Plastic injection Screws
    • Clamshell aluminum molds for urethane foam
    Enhanced ice
    • Removing Rust
    • Removing paint
    • High temperature pods

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

  • Innovative Pump Technology for Ship Industry

    In shipbuilding, high standards of reliability as well as increasingly the energy efficiency of the systems are important prerequisites for the economical-technical overall evaluation in the technical procurement process. Ships as self-sufficient systems are particularly dependent on the reliable functioning of all installed components, including the pumps. They fulfil many tasks on board which are vital for the operation of the vessel: Delivery of ballast water and wastewater, boiler supply, condensate recovery, drive engine cooling and of course the reliable supply of fire fighting systems.

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Premium

    Metallurgical

    MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for metal industry

    Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Water treatment solutions for the power generation industry

    Power generation industry is one of the greatest consumers of water, whether this is for cooling water applications or boiler feed (demineralized water). Lenntech can provide complete water treatment solutions in for the power generation industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Water treatment solutions for the paper & pulp industry

    As most of the largest industrial users of water, the paper and pulp industry have long treated water in accordance with environmental permits. Water is used in all major process stages, including raw materials preparation, pulp washing and screening and paper machines. Water is also used for process cooling, materials transport, equipment cleaning, general facilities operation and to generate steam for use in processes and on-site power generation. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in paper & pulp industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

  • Premium

    Piping & ducting solutions for the HVAC industry

    The heating, ventilation, and air conditioning industry refers to the technology of indoor temperature control. A sub-discipline of mechanical engineering, HVAC systems are crucial in the design of residential as well as commercial structures. These systems control the temperature, and also the quality of the air that gets circulated, by replacing or exchanging the air in a particular space. Heating, cooling and ventilation systems require high-quality, precision-engineered parts, such as those manufactured by PROCO Products. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Automated solutions for the power plant inlet water dredging

    Liquid Waste Technology’s dredging systems are used for power plant cooling water dredge applications. LWT’s dredges are designed to remove the sand, silt and sediment that build up in reception ponds and inlet channels to power plants. Each dredging system is custom built for the inlet water application, including the level of automation, removal rate and dredging depth required for each job.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Ultraviolet disinfection system for aquaculture & pool & water park

    For UPVC UV sterilizer seriers for Aquaculture & swimming pool UV sterilizer system is the most reliable , effective and safe water disinfection method. The reasons are UV posses the fast reaction time, no chemical required and easy operation method compare with chlorination and other chemical disinfection method . The UV disinfection technology is growing dynamically and broadly used on water ,air and material surface throughout the world. Applications: *Industrial Wastewater and Reuse *Air condition Cooling water * water Re-circulation *Swimming pool & Spa & Recreation water… * Fish & Shrimp Hatcheries * Aquaculture sea water application Features: 1. Reactor chamber is made of UPVC SCH 80 corrosion-resistant material |2. Multi-lamp array for Optimum performance 3. Watertight design for wet environment. 4. High efficient electronic ballast to deliver precise input power to lamp. 5. High transmission of high-purity quartz for high UV lamp performance. 6. High performance UVC germicidal lamp, low use of space 7. Easy installation and maintenance operations 8. Single closed (One Open end) high transmission quartz tube, easy to remove.

    By Enfound Enterprise Co., Ltd. based in Taipei, TAIWAN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you