Only show results available in Virginia? Ok

cooling water monitor Applications

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Monitoring oil in power plant cooling water

    The TD-4100 utilizes a non-fouling, non-contact flow cell which requires little to no maintenance, and uses fluorescence technology to accurately detect oil in water from low ppb to high ppm. For this application, the TD-4100 monitors oil in water at 1 to 5 ppm and signals an operator with an alarm when the concentration exceeds the high alarm relay set-point.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Cooling Tower, algae and biofilm control

    “Efficiently lowers algae, biofilm formation, bacterial counts and chemical consumption.” When temperatures are high, for example in cooling towers, a matrix of different microorganisms such as bacteria, fungi, EPS and algae can grow very rapidly. The disadvantages of biofilm formation in cooling towers can be enormous. Therefore water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a minimum.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring

    The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol.

    Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before the results are known. Biofouling can be well-advanced before treatment begins. In addition, it is believed that this technique does not detect the full range of microbial life present in cooling systems.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Premium

    Monitoring of phenol in water

    A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Reduce biofilm formation

    In many industrial or professional applications where water is being stored, biofilm may grow. The growth of biofilm can damage the installations and reduce efficiency of the circuit. A biofilm can grow certain substrates which can be found in water. When temperatures are high, for example in cooling towers, a matrix of different micro- organisms such as bacteria, fungi, algae can grow very rapidly causing the formation of a biofilm on certain surfaces submerge in water. During the formation of this biofilm, certain micro organisms starts producing extra cellular polymeric substances (EPS) which reinforce the biofilm structure.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Meteorological sensors for building automation

    Smart homes need a professional weather sensor that controls watering, closes the windows when it rains and optimizes the energy requirement (heating / cooling), depending on the external conditions. The better the weather information the megacities collect, the better the traffic management. The WS700 collects all measurement data for optimal weather-dependent building control. Rain / snow differentiation and maintenance- free intensity measurement of all types of precipitation. As an option, lightning detection can be integrated into the WS800. Insurance companies require proof in case of building damage.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Moisture Monitoring for Nuclear Reactors

    The Advanced Gas Cooled Reactor uses carbon dioxide gas to transfer heat from the nuclear fission core to the water boiler for steam generation. The moisture content needs to be monitored to avoid corrosion damage, and continuous moisture monitoring acts as a boiler leak detector or bulk moisture meter.

    By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

  • Premium

    Flow & Energy Management Solutions for Plant & Machine

    Spire Metering offers several solutions for leakage detection. The flowmeters are used to monitor cooling water in machining process. They are used also in liquid process control and leakage detection applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you