Only show results available in Virginia? Ok

cooling water monitoring Applications

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Meteorological sensors for building automation

    Smart homes need a professional weather sensor that controls watering, closes the windows when it rains and optimizes the energy requirement (heating / cooling), depending on the external conditions. The better the weather information the megacities collect, the better the traffic management. The WS700 collects all measurement data for optimal weather-dependent building control. Rain / snow differentiation and maintenance- free intensity measurement of all types of precipitation. As an option, lightning detection...

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Online monitoring solutions for the determination of chlorinated organics in water

    Determining chlorinated organics in waste water of the oxychlorination process is for reasons of environmental compliance. The on-line analyzer system uses a scrubber system where a carrier flow is bubbling through the water. The vapor phase is measured by a Flame Ionization Detector (FID) and is a measure for chlorinated organics of the water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Water monitoring equipment for Aquifer characterization industry

    In-Situ’s Virtual HERMIT Aquifer Testing Kit lets you monitor an entire well field with one system. Simultaneously configure, start, view, step, or stop all connected data loggers, or set up equipment to run tests at a pre-set time. Aquifer testing has never been so easy, simplifying data collection even at remote sites. Plus, In-Situ’s professional-grade water level monitoring loggers ensure you get the most accurate data possible.

    By In-Situ, Inc. based in Fort Collins, COLORADO (USA).

  • Weighing technology solutions for moisture analysis sector

    The most common method for determining the level of moisture in solid and semi-solid materials is through the loss on drying (LOD) technique. A sample is weighed on a scale, heated in an oven, then cooled in a dry atmosphere and weighed once more. The dry weight versus the wet weight gives an indication of what percentage of the sample was water.

    By Intelligent Weighing Technology, Inc. based in Camarillo, CALIFORNIA (USA).

  • Premium

    Online monitoring solutions for determination of water in liquid phase EDC

    The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to production units downstream.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Weather stations for modbus applications

    In the business of winter recreation, the weather can become both a friend and a foe. When the conditions just aren’t right for natural snow, snowmaking becomes a great alternative. For snowmaking to be successful, certain conditions must be met. Humidity levels and ambient temperatures affect the wet bulb temperature, super-cooling comes into effect, and evaporation levels must be measured. How are you supposed to measure all these conditions, you ask? Great question. After all, you’re a snow maker,...

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Water monitoring technology for nutrient monitoring

    Continuous monitoring of nutrient levels provides crucial information about daily, seasonal and event based changes in water quality conditions, and can be a strong indicator on the overall health of the water body. In recent years, monitoring of nutrients has grown in importance as it has come to the forefront in regulatory compliance of water quality in many regions.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Flow Measurement instrumentation for digital air / gas, steam, water flow meters

    For over 40 years Sierra has advanced our flow technology to offer customers around the globe the most cutting-edge thermal technology on the market. From heavy industrial to research and analytical applications, Sierra has a wide range of digital air flow meters and controllers with digital output protocols for easy network integration. Sierra offers digital gas flow meters and mass flow meters across two core technologies: Capillary Thermal, and Immersible Thermal. Buy a large selection our air flow meter...

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Online monitoring solutions for determination of water in recycled liquid EDC

    The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to production units downstream. This is determined at two sampling points in the process: EDC purification unit – top Light Column. EDC purification unit – top Heavies Column. For all other analytical solutions in the chlorination process, please browse the On-line Analyzers Suite under Products & Solutions.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of water in liquid phase VC

    The purpose of determining water (moisture) content in liquid VC (vinyl chloride) is to decrease risk of corrosion and damage further downstream the process. The on-line analyzer system uses a selective H2O measurement by means of multi-wavelength infrared.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for determination of water in gas phase EDC (cracking furnace feed)

    The purpose of determining water (moisture) content in liquid EDC (ethylene dichloride) is to decrease risk of corrosion and damage to the cracking furnace. The on-line analyzer system uses a selective H2O measurement by means of multi-wavelength infrared.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for fast determination of oxygen in dry chlorine

    The purpose of fast determination of oxygen in dry chlorine is to verify the chlorine oxygen specifications, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Online monitoring solutions for fast determination of oxygen in wet chlorine

    The purpose of fast determination of oxygen in wet chlorine is twofold: verification and control of membrane oxygen permeation, as well as to keep control of the oxygen-chlorine-ethylene explosion triangle. The technology behind AppliTek’s analyzer system for the fast determination of oxygen in wet chlorine is qualified as Best Available Technology (BAT) as defined by US Clean Air Act and Clean Water Act, as well as European directive 96/61/EC.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Hydrometry Monitoring

    For rivers and streams we offer a range of impeller and electromagnetic current flow meters to use as a point velocity measuring devices to aid monitoring during catchment management, discharges and pollution. Water level can be monitored via pressure transducer and logger together with radio and GSM/GPRS telemetry options.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Seismic Monitoring

    With Sound Velocity through the water being of prime importance during seismic surveys, Valeport offer a variety of sensors and probes to measure sound velocity with an unsurpassed accuracy level. Whether you require just a sensor or a SVP for profiling, we have products for surface use and up to 6000m depth operation.

    By Valeport Ltd based in Totnes, UNITED KINGDOM.

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society. This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service. Although applications in this area advance, there is still a clear demand to get new portable and...

    By MicruX Technologies based in Oviedo, SPAIN.

  • Water measurement systems & sensors for status & condition-based monitoring

    We offer a variety of telemetry based solutions to monitor and control assets:

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Online benzene and BTEX analyzers solutions for emission of toxic hydrocarbons sector

    Gas chromatograph for monitoring of emissions from industry: toxic hydrocarbons in air, water and soil.

    By Synspec BV based in Groningen, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you