cooling water system Applications available in Virginia

  • Microbial testing in cooling water system industry

    Superior reliability for superior control! Biocide treatments are essential to control microbiological growth in cooling systems. If not properly managed, the warm environments of cooling systems are ideal for the growth of microorganisms. As microorganism communities grow in cooling systems, they can attach to pipe walls and form biofilms. These biofilms pose serious risks, from human health risks like Legionnaire`s disease to reduced operating efficiency and eventually to equipment failure via microbiologically...

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Filtration solutions for cooling systems

    The installation of AZUD filtration equipments allows the reduction of the total solids in suspension in the water, and: Helps to maintain an optimal efficiency of energy in the heat interchange process. Reduce the accumulation of particles in the components of the cooling systems. Reduce the growing of microorganisms. The higher or lower proliferation of these microorganisms is directly linked to the higher or lower availability of organic nutrients which favour the development of the same. When reducing the...

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Water treatment for cooling towers

    Controlling and preventing the growth of microorganisms in a cooling tower is extremely important and required to keep the system running at optimal levels. The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. Unfortunately these chemicals are highly reactive with other chemicals and microbiological species found in the water. Chlorine dioxide however...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Water quality monitoring systems for cooling water treatment industry

    A number of treatment products are often added to prevent corrosion, scaling and fouling. Coating of sensors and other effects of these products must be taken into account when selecting analyzers. Discharge monitoring needs special attention because zero measurements must be reliable over time with little maintenance.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Industrial solutions for cooling water contamination

    Problem: Large quantities of water are used for cooling in industrial manufacturing. To prevent scaling, corrosion and biofilm in the cooling system, inhibitors and biocides are regularity dosed. Make-up water is continuously added to the system to balance the loss of water from evaporation. As water is added, the concentration of chemicals is diluted and the quality of water changes.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Cooling Towers and Process Water System Cleaning Applications Using Hydrogen Peroxide

    The unique properties of hydrogen peroxide (H2O2) make it a good technology for keeping cooling loops, process water loops and heat exchangers clean from fouling that can occur due to various contaminants in the water. Hydrogen peroxide works well in removing organic fouling on surfaces through mechanical means and in specific applications through biocidal mechanisms. Hydrogen peroxide can be used in a shock treatment mode where it is fed based on a timer set-up. It can also be used occasionally at higher...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring

    The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol.

    Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or...

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Innovative Pump Technology for Cooling and Refrigeration Industry

    Transporting cold liquids in cooling and refrigeration systems places high requirements on the pump used. For reliable, constantly high pump performance the pump has to be designed accordingly, dimensioned specifically for the application and fitted with special equipment for the low temperatures.

  • HVAC and Cooling Filtration

    Water from cooling towers attracts and absorbs airborne contaminants on a continuous basis. Typically, 85% of suspended solids in cooling water and hot water loops are smaller than 5 microns. Scientific studies have shown that these small particles (5 microns and less) are the adherent contaminants fouling cooling tower water, chilled water and heat exchangers, thereby reducing your cooling system efficiency.

    By Vortisand - a brand by Evoqua Water Technologies LLC based in St-Laurent, QUEBEC (CANADA).

  • Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used...

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Ultraviolet disinfection system for aquaculture & pool & water park

    For UPVC UV sterilizer seriers for Aquaculture & swimming pool UV sterilizer system is the most reliable , effective and safe water disinfection method. The reasons are UV posses the fast reaction time, no chemical required and easy operation method compare with chlorination and other chemical disinfection method . The UV disinfection technology is growing dynamically and broadly used on water ,air and material surface throughout the world. Applications: *Industrial Wastewater and Reuse *Air condition Cooling...

    By Enfound Enterprise Co., Ltd. based in Taipei, TAIWAN.

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Wastewater evaporator Solutions for the industrial wastewater treatment and disposal

    All industries produce wastewater. Cleaning, cooling and other processes result in industrial wastewater that can be harmful to the environment. Draygon`s Industrial Wastewater Evaporators distill the water from the particulate matter and waste, leaving only a small residue that can easily be disposed of. By reducing the need for storage and expensive hauling of large quantities of industrial wastewater, our industrial wastewater treament systems save money and help protect the environment.

    By Draygon LLC based in Venice, FLORIDA (USA).

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical...

    By Kurita based in Tokyo, JAPAN.

  • Automated solutions for the power plant inlet water dredging

    Liquid Waste Technology’s dredging systems are used for power plant cooling water dredge applications. LWT’s dredges are designed to remove the sand, silt and sediment that build up in reception ponds and inlet channels to power plants. Each dredging system is custom built for the inlet water application, including the level of automation, removal rate and dredging depth required for each job.

    By Liquid Waste Technology LLC - Mud Cat based in New Richmond, WISCONSIN (USA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine...

  • DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials...

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you