Only show results available in Virginia? Ok

cooling water treatment chemical Applications

  • Premium

    Chemical Water Treatment for cooling and processing water

    An optimal heat transfer is the most important point in every water cooled process. Scale, corrosion and biofouling negatively affect the heat transfer. Therefore Kurita develops for cooling and process water systems customized solutions, based on the combined treatments of scale & fouling prevention, corrosion inhibition, and biocides.

    By Kurita based in Tokyo, JAPAN.

  • Water treatment for cooling towers

    Controlling and preventing the growth of microorganisms in a cooling tower is extremely important and required to keep the system running at optimal levels. The presence of microorganisms will cause the system to breakdown and decreases the efficiency of the heat transfer. Typically oxidizing biocides such as chlorine and bromine have been used to treat cooling water. Unfortunately these chemicals are highly reactive with other chemicals and microbiological species found in the water. Chlorine dioxide however...

    By Applied Oxidation LLC based in Chattanooga, TENNESSEE (USA).

  • Premium

    Chemical Water Treatment for cleaning

    Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment solutions for the chemicals & pharmaceuticals industry

    Water is a critical ingredient in chemical manufacturing operations; consistent and high-quality supplies are needed for a range of purposes including production, material processing, and cooling. Water treatment systems have to often comply to very stringent industry specific qualifications and certifications. A stable and guaranteed water supply is critical and duty stand-by solutions are frequently requested from end-users.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Water treatment chemicals for the steel and coke industry

    The many production facilities within the steel industry, e.g. the blast furnace, converter, continuous caster, hot and cold strip mills and the coke oven plant require immense quantities of water for the cooling circuits and for gas scrubbing. During the last few years, the majority of steel plants have managed to significantly reduce freshwater usage per ton of steel through water recycling and process optimization. However, the high water quality standards required for the water circuits and regulations for...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical...

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Water treatment chemicals for the food & beverage industry

    The food and beverage industry is suffering from severe economic pressure. Efficient and continuous production processes are therefore business critical. By choosing Kurita concepts for your cooling water, boiler water and waste water plants as well as your reverse osmosis systems and autoclaves – all of which are specially adapted to your needs – you opt for economic and ecological treatment, leading to more productivity and cost-efficiency.



    By Kurita based in Tokyo, JAPAN.

  • US Peroxide Rapid Response

    US Peroxide (USP) is uniquely positioned to rapidly respond to your environmental treatment challenges. USP combines experienced applications and equipment field support with a large inventory of storage systems and pumping modules to respond quickly to time sensitive water and wastewater treatment situations. Advantages With considerable inventory of tank and pump systems as well as our partnerships with leading chemical suppliers, USP can mobilize chemicals and equipment quickly to respond to your rapid...

    By USP Technologies based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Water treatment chemicals solutions for beverage industry

    In the beverage industry, large quantities of filtrate water and pure water are used to prepare and cool products as well as clean containers. Kurita Water Industries offers a range of products, such as filtration systems using membranes and deionizers, which combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers. Kurita Water Industries also offers a number of wastewater treatment systems, including biochemical treatment systems that...

    By Kurita based in Tokyo, JAPAN.

  • Water Disinfection for Industrial Water Treatment

    MIOX’s patented Mixed Oxidant Solution (MOS) or Hypochlorite (HYPO)chemistries for cooling tower and cooling loop water disinfection improves safety, lowers general corrosion rates, increases performance, and saves money. The unique qualities of MOS lowers corrosion rates by 80% in copper and 50% in steel, resulting in a reduction of downtime, maintenance, and expense. Additionally, MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining...

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Process water treatment

    Process water covers the wide range of boiler feed water, cooling water for heat exchangers or engine, chemicals dilution, etc. It should typically have a conductivity ranging from 0,1 to 50 uS/cm, with little to no hardness to avoid scaling in heating system. Oxygen and carbon dioxide should be removed to prevent corrosion. Depending on your application, the water quality requirements can vary: Boiler feed water characteristic. Cooling water quality. Tap water or fresh groundwater are the most widely used...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Premium

    Filtration solutions for cooling systems

    The installation of AZUD filtration equipments allows the reduction of the total solids in suspension in the water, and: Helps to maintain an optimal efficiency of energy in the heat interchange process. Reduce the accumulation of particles in the components of the cooling systems. Reduce the growing of microorganisms. The higher or lower proliferation of these microorganisms is directly linked to the higher or lower availability of organic nutrients which favour the development of the same. When reducing the...

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Water Disinfection for Food and Beverage Water Treatment

    MIOX provides advanced chemical solutions to the food, beverage and farming industries for all water treatment applications including source water treatment, surface or groundwater, process water treatment, cooling towers on the facility, bottle and surface disinfection, and clean in place (CIP) for syrups and raw sugars. Our team designs custom solutions to deliver safe, effective, and economically attractive alternatives to minimize or eliminate the use of expensive and hazardous delivered chemicals.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Water treatment solutions for the industrial industry

    All the industries including pharmaceutical, food&beverage, chemical, textil, paper & pulp, etc. require big quantities of water. The water used in any industrial process as for example heating, cooling or if it is going to be consumed directly in the process like in food & beverage industry should be purified and softened. Our range of pressure vessels can treat these effluents through sand, multimedia or activated carbon filters according to the needs.

    By Poltank S.A.U. based in Sant Jaume de Llierca, SPAIN.

  • DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials...

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Cooling Tower, algae and biofilm control

    “Efficiently lowers algae, biofilm formation, bacterial counts and chemical consumption.” When temperatures are high, for example in cooling towers, a matrix of different microorganisms such as bacteria, fungi, EPS and algae can grow very rapidly. The disadvantages of biofilm formation in cooling towers can be enormous. Therefore water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a minimum.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you