copper recycling Applications
-
PremiumRecycling sorting solutions for the fines copper
Copper granulate, recovered by the recycling process of copper wires and cables, has the potential to be a high value resource. However, even after the removal of impurities, polymers and ferrous from the granulate, it can still contain small amounts of lead, brass or aluminum – often up to three percent. TOMRA sorting technology removes the remaining pollutants efficiently and automatically from the copper granulate – with an especially high efficiency of lead removal.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
-
Metals shredding for aluminium, copper, steel industry
By AWC Engineering Ltd based in Stalybridge, UNITED KINGDOM.
-
PremiumRecycling equipments for cable recycling
Eldan Recycling has been active within cable recycling close to 60 years. What started with cable cutters, has expanded into including cable strippers, alligator shears and ACSR shears as well as machines and complete plants for processing of cables. Since copper and aluminium is 100% recyclable without loss of quality recycling of cable has always been a popular field.
By Eldan Recycling A/S based in Faaborg, DENMARK.
-
Industrial water Copper removal and recovery
Pure copper is soft and malleable; a freshly exposed surface has a reddish-orange color. It is used as a conductor of heat and electricity, a building material, and a constituent of various metal alloys. Recycling is a major source of copper in the modern world. A combination of economic and regulatory factors are now at work to make metal recycle and water reuse very attractive.
By PuriTech Ltd based in Herentals, BELGIUM.
-
PremiumShredding of swarf recycling with Mercodor equipment
For the optimal processing and reduction of steel and stainless steel chips, cast, aluminium, copper, brass, titanium and precious metal turnings, for instance, Mercodor, with its rugged, compact precision cutters has the right solution for each and every task.
By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.
-
PremiumProducts for electric cables and radiators recycling
Compact machines and lines for the recovery of copper and aluminum by milling and dry separation of the metal from the insulating part, from aluminum or copper (ex. radiators).
By Guidetti Recycling Systems based in Renazzo (FE), ITALY.
-
Removal of Non-Ferrous Metals in the Recycling Industry
Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.
By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.
-
metal scrap recycling
By suzhou eaglestar import and export co.,ltd based in CHINA.
-
PremiumRecycling equipments for non-ferrous scrap metal shredding & recycling
Non-Ferrous Metal Recycling is a large industry focusing on the recovery of metals such as aluminum, brass, copper, and even precious metals from electronic scrap. The applications and needs of non ferrous metal recyclers vary greatly. These can include a large corporate recycler buying UBC bales for shredding to be converted back into beverage cans or a small recycler who is recovering precious metals from circuit boards or catalytic converters.
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Industrial shredders system for metal shredding sector
Metal swarf is valuable and heavy, and often voluminous; Three reasons to separate them into their components. Transportation becomes more efficient with reduced volume where it can then be reprocessed and transformed into cash. With WEIMA technology it is possible to shred all kinds of light metals to include aluminum or magnesium, also copper and brass. Irrespective of profile; tin, foil, long swarf or punching waste.
By WEIMA based in Ilsfeld, GERMANY.
-
PremiumRecycling sorting solutions for the wire recovery
Previously, cable and wire materials were often lost in the treatment and sorting process, resulting in a financial loss due to the high proportion of copper they contain. TOMRA sorting technologies are capable of detecting these wires, transferring them to a metal product and then finally sorting them in a further step into a cable fraction of outstanding purity.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
-
PremiumRecycling sorting solutions for the non-ferrous metals - post shredder
The widespread use of electronic products has created an enormous demand for the sorting of non-ferrous metals such as copper and aluminum. To be usable, these non-ferrous metal fractions must be treated to a high degree of purity. Thanks to TOMRA’s efficient sorting technology, separating these materials from metal waste makes is worthwhile in every aspect.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
-
PremiumRecycling sorting solutions for the zorba - shredded non-ferrous metals
The value of Zorba – shredded non-ferrous metals originating from end-of-life vehicles or WEEE – continues to increase, as the demand for copper, nickel and brass created by modern lifestyles is on the rise. TOMRA’s sensor-based sorting technology can double the value of Zorba.
By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.
-
MX-400 Cable wire Recycling Plant
By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.
-
Recycling Solutions for the metals industry
ANDRITZ METALS – highest quality in metalforming technology. Complete lines for the production and further processing of cold-rolled carbon steel, stainless steel, and non-ferrous metal strip. ANDRITZ METALS provides solutions for lines to produce steel and other metal strips. These lines consist of equipment for pickling, cold rolling, annealing, heat treatment, strip coating and finishing, and for pickling acid regeneration. Additionally, ANDRITZ METALS supplies turnkey industrial furnace systems for thermal processes, such as heat treatment of slabs and forged pieces, as well as refining furnaces for the copper industry. ANDRITZ METALS furthermore supplies presses for punching and deep drawing.
By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.
-
Scrap Metal Baler
By Jiangsu Wanshida Hydraulic Machinery Company based in Jiangyin, CHINA.
-
PremiumOptical sorting machines for electronic scrap (WEEE) industry
Recovery of recyclables from Waste Electrical and Electronic Equipment (WEEE): Metals and alloys. Plastics (thermoplastics, plexiglass, etc.). Composite materials (circuit boards, etc.). Brominated plastics (BFR). Plastics with cadmium compounds. Material tainted with precious or recoverable metals (e.g. copper, brass, silver, etc.). Sorting of monitor glass (CRT), etc.
By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.
-
Reliable Shredding Technology for Metal-processing Industry
Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores. Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.
By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.
-
PremiumShredding solutions for refrigerators industry
SatrindTech shredders are used within the recycling lines of refrigerators. When treated properly, it is possible obtains a total of nearly 90% in different materials (among which iron, plastic, polyurethane, aluminum and copper) from these product. The two shaft shredders are used as primary crushers if used as the first step of the process as they are used for a volume reduction after the collecting cycle, while the three-shaft and four-shaft are used as secondary shredding as they allow a controlled size.
By SatrindTech Srl based in Arluno, ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you