denox Applications

Related terms for "denox ": DeNox technology applications , DeNOX process applications , DeNOX process control applications

• 

  DeNox Systems

  Newland Entech Europe could reducing NOx emissions adding ozone to the flue gas before it enters the chimney. The ozone convert the NOx to N2O5, which it is high soluble in water and is easily removed from the flue gas by a scrubber.

  By Newland Entech Europe based in VILLAVICIOSA DE ODON, SPAIN.

• 

  Premium

  Gas monitoring instruments and systems for DeNOx process control

  In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

  By Gasmet Technologies Oy based in Helsinki, FINLAND.

• 

  Premium

  Insitu Flue Gas Desulfurization - DeSOx Analyzer

  The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

  By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

• 

  Premium

  Waste to Energy

  We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

  By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

• 

  Gas Detection Solutions for Power Generation Industry

  Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

  By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

• 

  Premium

  Monitoring solutions for the De-NOx plants

  In recent years the number of Selective Catalytic Reduction (SCR) and Selective Non-Catalytic Reduction (SNCR) plants for De-NOx have increased significantly. Continuous analysis of NOx prior to the de-NOx plant is often required to measure the concentration generated by the combustion process. This may be required to provide feed-forward to the Ammonia/Urea injection system and also to allow the effectiveness of the reduction process to be assessed. Continuous analysis of NOx post-reduction is required to allow the effectiveness of the reduction process to be assessed. It may also be beneficial to monitor NH3 slippage at this stage by calculating from the pre and post NOx levels if excess Ammonia/Urea is being applied.

  By Codel International Ltd based in Bakewell, UNITED KINGDOM.