Only show results in Virginia? Ok

diesel engine Applications

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for inner Diameter Filter Outer Diameter: 20` Maximum for outer Diameter Filter Height: Up to 32` High – closed one end or open at both ends (Other sizes Available – Contact Mfg. For Details) Injection Cleaning System HOW THE INJECTION SELF-CLEANING SYSTEM (ICS) WORKS The Injection Self-Cleaning System releases compressed shop air through a rotating air jet that is driven up and down in a spiral motion inside the filter cartridge. In order to maintain the cabinet clean, an air pu

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Cetane Number of Diesel Fuels #3010

    The Cetane number of a diesel fuel is a measure of the ignition properties and is an important specification that must be met during fuel production. The traditional laboratory method for Cetane number determination is the knock engine method in which the fuel is burned and its combustion characteristics compared to known standards. This method is time and labor intensive, and provides no ability for real time control of production. This note discusses the use of Guided Wave hardware and software tools for the measurement of Cetane number in diesel fuel using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR is applied in real-time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly related to the wax formation and hence the Cloud Point. This note will discuss the use of Guided Wave hardware and software tools for the measurement of the Cloud Point of diesel fuel using fiber optic-based, near-infrared (NIR) spectroscopy. NIR can be applied in real time directly in process.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • Process design & engineering services for bio-energy industry

    Bio-fuel: A Bio-fuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Bio-fuels are made by a biomass conversion from a wide range of natural and organic resources which includes solid biomass, liquid fuel and biogases. Bio-fuels have increased in popularity because of rising oil prices and the need for energy security. The two main bio-fuels are ethanol and bio-diesel; both type of fuel causes less pollution as compared to conventional diesel- powered engines and have the same performance as a regular diesel fuel.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Filter Weighing

    Traffic means mobility and air emissions. Thanks to economical advantages, diesel engine becomes more and more popular, but particle emission is strictly restricted by regulations. Determining the weight of particulate matter (PM) is a key task in the automotive industry and one which is likely to become even more important as emissions standards become stricter. To allow fast and easy measurement of particulate matter at any time, METTLER TOLEDO has developed new filter weighing solutions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Applications and Air Pollutants Removed for Marine Power Plants

    Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Land-based Sprinkler Systems

    Transportable pump units The pump and motor come built together in a compact unit that is easy to move. Typically, self-priming pumps are used. The pump can be combined with electric motor, diesel or gasoline engines including battery and fuel tank. Transportable pump systems can be supplied as explosion-proof. Complete container The complete sprinkler or fire pump system can be supplied mounted in a container with all internal piping leading through to the container wall ready for assembly with the supply line and pressure pipe. Stationary sprinkler pumps with electric motor or diesel engine The complete unit comes on a base plate construction, and as pumps are also designed for diesel operation, you can choose between assembly with electric motor or diesel engine. The pump and motor are built together on the base plate via a flexible coupling.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Applications and Air Pollutants Removed in the Energy (Power) Industry

    Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Oil Mist Separators for Shipbuilding

    A  Contec oil mist separator (COMS), type 9.200/762, with special frame construction for the lubrication system of the energy supply is being used on the latest cruise ship of the Celebrity Cruises shipping line. The energy requirements of the cruise ship - built by Meyer Werft Papenburg - is covered by four MAN Diesel & Turbo SE, type 14V48/60CR, diesel engines. The Contec oil mist separator, type 9.200/762, with upstream demister and M6 filter cartridge ensures the reduction of particle contamination. Throughput: 1,200 Nm³/h @ 50 Hz.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • Air Emissions Management for Tanks

    Facilitates Data Management for Tank Emissions Reporting; VisionMonitor Software leverages existing technology investments you have deployed to run your current operations. It simplifies the process of gathering tank inventory data by linking to existing internal systems, automating data collection from these systems via a scheduler, and by providing a path for manual input when required for sources such as diesel engines, package boilers, etc.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Automated solutions for the industrial lagoon / pond dredging

    Liquid Waste Technology’s dredging systems are widely used for industrial lagoon dredging applications. Electric driven or diesel engine driven dredges are used for removing mine tailings, dredging chemical processing waste ponds, and slag recovery. Automation can be added to make dredging industrial lagoons more efficient and productive.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Decanter centrifuge for mining & diamond drilling

    GNLW223 Series Mini Centrifuge is specially designed for small capacity, small footprint, and fine solids separation. It is designed to meet the drilling fluids recycling for mining drilling rigs especially for diamond drilling. The diamond drilling contract can choose to buy single centrifuge unit with electric drive fixed speed or VFD drive variable speed or even the Fully Hydraulic Drive. For the FHD drive Centrifuge, it can use the diesel engine to power the hydraulic pump to feed to the centrifuge without any electric. GN also has the completed tank system with Mini Shaker for option!

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism requires 80 cfm of compressed air at 80-100 psi to function properly. How it Works Easy-to-load, cabinet lid forms seal Automatic and programmable cleaning cycles take 3-5 minutes to complete Injection Self-Cleaning System (ICS-360) blows particulate off every part of the filter Dust and debris drawn out by a powerful cyclone collector and safely stored in a 55 gallon drum Optional Filter Inspection Station and Diesel Filter Inspection Station can be used to measure restricion levels and filter integrity Features Injection Self-Cleaning System (ICS-360) ? Adjustible for diverse filter diameters and heights ??User Friendly Controls with LCD status display? Cyclone - 1,400CFM @ 4` static pressure 55 gallon dust barrel included

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you