Only show results available in Virginia? Ok

disposal industry Applications

  • Disposal wells treatment for oil and gas industry

    Treating the water being injected for disposal is not always considered by operators. This is likely costing you money in the long run. Removing iron, heavy metals, and treating out ammonia is a benefit to treating with MIOX’s mixed oxidant solution. While these are benefits of the technology, the most important is the elimination of bacteria which can cause Hydrogen Sulfide (H2S), corrosion pitting, poor injectivity and other problems, resulting in great well workover frequency. Treating injection wells does not need to be expensive, and can be treated as you inject.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

    For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

  • Industrial dedusting

    The industrial dedusting field is very varied and branches out in numerous specialized branches. For a preliminary examination of the problem it is necessary to dispose of two series of data: characteristics of the system which emits the pollutants; nature of pollutants and their characteristics.

    By GGE srl based in Rio Saliceto, ITALY.

  • Premium

    Industrial Facilities

    The dust generated at various times during the production and processing of materials in factories is often unpleasant and pollutes the environment. Such situations arise, for example, in steel production, when disposing of slag, in cement production or in the lumber industry. EmiControls products have the versatility and flexibility to be adapted to a wide and diverse range of situations, enabling measures to be taken that combat these sources of dust effectively and drastically reduce their levels inside and outside the plant.

    By EmiControls based in Bolzano, ITALY.

  • Industrial and commercial water filtration for municipal & industrial waste water

    Whether your specific water usage is for Industrial, Commercial or Municipal purposes all application have one thing in common-waste.  Hydro-Gen’s range of industrial/commercial water filtration systems suit a wide range functions allowing you to reduce overall water and industrial waste-water disposal costs.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Industrial Wastewater Treatment

    Processors are continually facing changing environmental regulations, rising costs for wastewater disposal, increasing utility costs, and a growing demand for green products manufactured using sustainable operations. These factors are driving food and beverage processors to pursue on-site wastewater treatment. ADI Systems’ wastewater treatment technology portfolio and experience can provide treatment solutions from pretreatment through to producing effluent of direct-discharge and/or water-reuse quality. Our vast experience in the food and beverage industry includes custom treatment solutions for dairy (milk, cheese, whey, yogurt, and ice cream), soft drink, fruit and vegetable processing (potatoes, corn, tomatoes), snack food, prepared meals, confectionery, and many others.

    By ADI Systems based in Fredericton, NEW BRUNSWICK (CANADA).

  • Premium

    Mining & minerals solutions for precious metals industry

    WesTech designs and manufactures a full range of thickeners for the minerals industry for product concentration, tailings disposal and CCD circuit washing, including HiFlo Thickeners, AltaFlo Thickeners, and Deep Bed Paste Thickeners. Design-build and turnkey projects are our specialty. Our reputation for excellence has been built one project at a time. Stateside and worldwide, WesTech provides a wide range of process equipment to help maximize the value of your resources.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Waste recovery for construction industry

    Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land remediation through to the treatment of APCs from incineration as well as the treatment of asbestos.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Industrial briquette presses for plastic briquetting

    There is no such thing as “just waste”. Business leaders are well aware that even the smallest parts of production waste have a value. By pressing foamed plastic for instance, the waste volume can be compressed at a rate of 30:1 saving storage space, disposal and transportation costs.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Solutions for the food & beverages industry

    Food waste in general has a high energy density. This results in high yields when producing biogas through anaerobic treatment. Biogas is a very flexible energy product with proven capabilities in the power, transportation, and heat demanding sectors. In this sector, anaerobic digestion offers significant cost advantages over traditional disposal methods. By upgrading the biogas into natural gas using a DMT Environmental Technology system, a solid business case with an interesting return on investment is assured.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Industrial briquette presses for paper briquetting

    There is no such thing as “just waste”. Business leaders are well aware that even the smallest parts of production waste have a value. By pressing foamed plastic for instance, the waste volume can be compressed at a rate of 30:1 saving storage space, disposal and transportation costs. A number of other plastics like Styrofoam that are very bulky and light weight can be utlised in this process, they include; cellular material, PUR-foam etc.. Reduce disposal costs and simplify handling with WEIMA!

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Waste Compaction for the Depackaging Systems for Food Waste Industry

    The food and drink industry relies on modern packaging materials and systems to extend the life of its products and to make them easy to store and transport. Inevitably during these processes wastage occurs whether this is when food expires, through faulty packaging or is otherwise unfit for sale or consumption, disposal can become a costly burden for the food manufacturers or retailers.

    HSM depackaging equipment solution, the universal recycling presses (URP’s) are designed to recover organics from food waste and deal with a variety of materials from plastic wrapping and containers, to wax-coated cardboard and even metal cans.

    HSM depackaging machines make it possible to efficiently recycle and recover organic and packaging waste from food waste.

    For more information or to discuss your baling needs, please contact us!

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Waste Compaction for the Food and Beverage Industry

    The food and drink industry relies on modern packaging materials and systems to extend the life of its products and to make them easy to store and transport. Inevitably during these processes wastage occurs whether this is when food expires, through faulty packaging or is otherwise unfit for sale or consumption, disposal can become a costly burden for the food manufacturers or retailers.

    HSM depackaging equipment solution, the universal recycling presses (URP’s) are designed to recover organics from food waste and deal with a variety of materials from plastic wrapping and containers, to wax-coated cardboard and even metal cans.

    HSM depackaging machines make it possible to efficiently recycle and recover organic and packaging waste from food waste.

    For more information or to discuss your baling needs, please contact us!

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Wastewater Treatment for Food Industry

    We are about to bring our patented waste water treatment technique for heavy industrial waste water disposal. Rotating Bed Biofilm Reactor (RBBR) requires less space than traditional solutions. Our treatment process handles temporary increases in load and is suitable for use in the food industry.

    By Clewer OY based in Turku, FINLAND.

  • Premium

    Mining & minerals solutions for minerals processing industry

    WesTech designs and manufactures a full range of process equipment for the minerals industry in the USA and worldwide, including highly efficient HiFlo Thickeners, and Deep Bed and TOP Paste Thickeners for product concentration, tailings disposal, and CCD circuit washing. Each project is completely shop pre-assembled prior to delivery at job site. With 40 years of experience and full ISO 9001:2008 certification, we meet project deadlines and production schedules.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you