Only show results in Virginia? Ok

distributed generation Applications

  • Premium

    Actuators for the power generation

    As well as traditional power stations, applications for Rotork products are found on renewable energy generation such as solar thermal plants and on CO2 emissions reduction processes such as flue gas desulphurisation and carbon capture and storage.

    By Rotork based in Bath, UNITED KINGDOM.

  • Spill containment for power generation

    The SafeGuards line of containments is used throughout the Power Generation / Utility / T & D industry for applications ranging from tanker containment down to Drip and Leak Containment. From small transformers to the largest transformers, small Gen-Sets to large Gen-Sets, drums to tanker trucks, we can supply standard as well as custom sized and custom designed berms to fit your every requirement.

    By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).

  • Pumping solutions for power generating

    Fluids Handled - Lubricating oils, Fuel Oil, Fuel Flow Dividers.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Gas Detection Solutions for Power Generation Industry

    Boreal possess an array of products for the power generation industry from emissions stack monitoring, boiler room monitoring, chloride leak detection, and ammonia slip in deNOX. Boreal’s products are tailor made for coal fired power plants, natural gas fired, and waste-to-energy. Whether gas detection is used for safety, process, or environmental reasons, Boreal has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Advanced water purification technologies for power generation sector

    SnowPure has been providing EDI technology to the power plant market since 2002. Power plants around the globe are utilizing our Electropure EDI including locations in the United States, Central America, Europe, the Middle East, and China. With the introduction of our higher-capacity EXL product we are now able to serve a greater share of the power plant market including larger installations.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Piping & ducting solutions for the power generation industry

    The generation and distribution of electricity consists of processes such as power stations, power transmission, electricity distribution and electricity retailing. PROCO Products has an inventory of check valves and expansion joints that are suitable for power generation industries, and can handle the stresses and pressures that are a normal part of the process. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Premium

    Evaporation technology for power industry

    EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Atmospheric Water Generators

    WaterMicronWorld, Ltd. is engaged in the research and development, manufacturing, marketing, and worldwide distribution of atmospheric water generators, filtration, ionization, and purification devices and chemicals. The Company’s various products include Atmospheric Water Generators, the WaterMicronWorld™ (AWG-30H/O Home or Office machine) and an extensive line of C-Series industrial grade Atmospheric Water Generators capable of producing 200,250, 500, 1000, 3000, and up to 5000 liters per day of pure fresh drinking water. For more information on WaterMicronWorld, Ltd., please visit our website at: www.watermicronworld.com WaterMicronWorld, Ltd utilizes a revolutionary AWG (Atmospheric Water Generation) technology to produce safe and drinkable water. AWG refers to the technology of extracting and producing purified drinking water from the humidity present in the air. To produce pure water, it requires no plumbing or any type of external water source.

  • Premium

    Food Waste Recycling, Reduction or Disposal Systems for Food Manufacture & Distribution

    Tidy Planet has multiple applications with the F&B Food manufacture and distribution sector, either working at DC Centralised hubs with energy generation plants, or working at production level at food manufacturing sites. Working with bakery wastes, fish wastes and chicken producers.

    By Tidy Planet Limited based in Macclesfield, UNITED KINGDOM.

  • SDS Authoring and Generation

    The SDS Authoring and Generation module manages the creation, distribution, and storage of Safety Data Sheets (SDSs). Designed to meet increasingly stringent regulatory requirements of a number of jurisdictions both domestic and foreign, the module dramatically reduces the cost and liability associated with typical SDS management programs. . By 2015, all SDS documents and labels must comply with the Globally Harmonized System (GHS) classification standards. Features include: • Automatic flagging and documentation of first shipments, revised SDS, and no SDS within one year • Masked complexity (with access to full detail) • Protection of trade secrets by user-defined percent ranges, and the ability to hide proprietary chemical information • Cross referencing of business operating languages • Ability to update multiple SDS simultaneously SDS Authoring and Generation can be purchased as a standalone solution or as part of the Q EHS compliance software package.

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Aerosol and particle technology for aerosol generation industry

    For more than 25 years Palas has been building systems for the aerosol generation. With more than 30 different systems Palas is market leader worldwide. In particular, the high reproducibility and constancy regarding the particle size distribution and concentration of the Palas aerosol generators have to be emphasized. The Palas aerosol generators are heatable in part up to 150°C. Several types are built in pressure-resistant version and being used successfully worldwide for applications in under and overpressure up to 10 bar.

    By Palas GmbH based in Karlsruhe, GERMANY.

  • Premium

    Pumps for Asphalt / Bitumen

    DESMI has a full range of different pumps and matching equipment supporting the handing of bitumen products. Including unique features suited for today’s needs and new polymer based formulations, we have the solution. For certain applications, we can offer proven sealing options, available is also a patented zero-leakage pump with a state of the art magnetic coupling. This pump offers a total protection against spillage and vapour, which may create environmental hazards. Electrical heating is an alternative to heating by liquid or steam. Applications tend to fall into four categories: Production (refining), distribution (terminals), hot mix (paving mixtures), and roofing (filled asphalts). Refineries and terminals often use steel pumps, while hot mix asphalt plants use mainly cast iron pumps with heating jacketed, and either packing or mechanical seals. Roofing plants are generally pumping highly abrasive, filled asphalts for shingle manufacturing.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Premium

    Monitoring drinking water quality

    Drinking water supply and distribution systems around the world (a critical and interdependent component of a nation’s infrastructure) are vulnerable to both intentional and accidental contamination. Unusual water quality may serve as a warning of potential contamination. The available physico-chemical sensors utilize general water quality parameters, such as free chlorine, oxidation reduction potential (ORP), total organic carbon (TOC), turbidity, pH, dissolved oxygen, chloride, ammonia, nitrate to detect the contamination. Generally, one or more of these water quality parameters will change due to the injection of a contaminant. However, no single chemical sensor responds to all possible contaminants nor can they give any indication of the potential toxicity of complex mixtures.

    By microLAN B.V. based in Waalwijk, NETHERLANDS.

  • Premium

    Strategic market research solutions for power industry

    PennWell’s Global Power Division leads the industry with a synergized combination of market-dominating publications and a unique global network of events. With cutting-edge content, face-to-face networking opportunities, and full-scale web communities, industry leaders rely on PennWell’s Global Power Division and to provide key information for the global power generation, transmission and distribution sectors.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Environment health and safety software for the electricity industry

    Intelex works closely with clients in the Electricity industry to keep their workforces safe, improve their environmental performance and streamline the collection, reporting and tracking of key organizational data. Whether you are involved with electricity transmission, generation or distribution, Intelex has a software solution that will work for you.

    By Intelex Technologies Inc. based in Toronto, ONTARIO (CANADA).

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Utility-Scale Power Plants

    As is the case in many countries, utility-scale power plants that produce renewable energy at the megawatt level are eligible to receive the Turkish government’s support via financial incentives. These power plants, whose operating costs are much lower than those of conventional power plants, can sell renewable power to electricity distribution companies at a government-guaranteed price over a fixed period of time. Companies or individuals can invest in and develop both licensed and unlicensed renewable energy projects to generate electricity. EkoRE offers investors all essential services to develop solar, wind and biogas power plants under one roof.

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • Secondary disinfection treatment for commercial & institutional

    Waterborne illness from microbial growth in water distribution systems is a real threat to water safety. MIOX’s patented Mixed Oxidant Solution (MOS) chemistry for secondary disinfection can help eradicate biofilm that can harbor Legionella and other microorganisms without the use of Chlorine Dioxide. MIOX generators improve workplace safety by eliminating the handling and storage of hazardous chemicals while maintaining steady disinfection residuals.

    By MIOX Corporation - Johnson Matthey`s Water Technologies based in Albuquerque, NEW MEXICO (USA).

  • Filtration systems & solutions for energy sector

    Porvair Filtration Group have supplied a comprehensive range of filtration and separation products to the energy market for many years. We supply all major sectors of the power generation, distribution and supply industry, and our technology is used over a wide range of applications. These include, but are not limited to, the distribution of natural gas, conditioning and treatment of fuel oils, hydrocarbons and produced water, clean coal technologies, gasification and fuel cell technology. Our unrivalled experience and extensive product range ensures we can supply a fully engineered tailored solution for every application.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you