Only show results available in Virginia? Ok

drinking water monitoring Applications

  • Premium

    Online Monitoring for the Drinking Water Industry

    AppliTek manufactures wet-chemical analyzers specifically designed for measuring on a continuous base the quality indices of drinking water, from raw water intake up to distribution level. Our systems have a small footprint, reduced reagent consumption and show excellent levels of detection in compliance with modern standards.

    On top of that, the delivery of safe water throughout the water cycle will raise the need for efficient monitoring systems detecting in real-time contaminations. `Broadband toxicity`, a non-specific parameter defined by AppliTek, is a prodigiously new and clean technology for safeguarding drinking water.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Drinking water solutions for the nitrate monitoring

    Problem: Nitrate, the most stable form of nitrogen in water, is found in both ground and surface water and originates from both natural and anthropogenic sources. Due to its high solubility in water, nitrate is not filtered out from groundwater like other contaminants. Removing nitrates from source water is important as elevated levels in drinking water can cause serious health effects when ingested.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Monitoring of Algae in Drinking Water

    The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated with algae groups of a toxic nature. Knowledge of concentrations of algae within the water can assist in determining the loading into water processing plants.

    These in-situ fluorometers are available as single parameter sensors (UniLux), or 3 channel sensors (TriLux).The CTG FastFlow fast repetition rate fluorometer provides information on the physiological state of algae it monitors. As well as providing detailed information on the growth rate of the algae (which can indicate the occurrence of a future algae bloom), it can immediately inform and alarm on toxins that have accidentally or deliberately been introduced into the water systems, as with the FastGuard system. The FastFlow differs from the FastGuard system in that it logs and displays detailed information on the state of the algae monitored for operational requirements.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Algae monitoring of drinking water reservoir -

    Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometric detection at 665 and 750 nm). The results of the off-line standard lab method show a good correlation with the measurements of the ALGcontrol. The good correlation can be verified as well at high as at low concentrations of total chlorophyll.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Groundwater Monitoring for Water Resource Management

    One of the greatest problems facing the planet is the management, conservation and equitable distribution of fresh water supplies. The fresh water sources may be lakes, rivers or ground water aquifers, most of which are now under stress.

    By HERON Instruments Inc. based in Dundas, ONTARIO (CANADA).

  • Premium

    Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Drinking water solutions for the source water monitoring/ protection

    Problem: A challenging aspect of drinking water treatment is often predicting or monitoring the changes that occur with incoming water quality. Seasonality, weather events, agricultural practices or upstream discharges can influence the quality of both ground and surface water over time. With multiple variables impacting source waters, monitoring historical trends may not be sufficient to predict raw water changes or detect uncharacteristic events.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Radiation monitoring instruments for the Utilities - drinking water - wastewater industry

    Water Security: Drinking Water / Wastewater, Radiation Detection & Monitor Instrument Systems.

    By Technical Associates based in Canoga Park, CALIFORNIA (USA).

  • Premium

    Pure drinking water solutions for laboratories

    For 40 years our water distillers have been used in laboratories throughout the world to produce high-purity distilled water. Not only are our stainless steel systems durable and reliable, but they waste much less water and are less expensive than the other brand of popular laboratory water distillers. Whether your facility is a medical, dental or research laboratory, our water distillers can be configured to meet any grade of water that you need. Simply tell us what grade of water you need to achieve and we will configure the best system to meet your specific needs.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Drinking water solutions for the TOC removal efficiency

    Problem: Organic matter (UV254/TOC) in drinking water can react with chlorine to form harmful disinfection by-products (DBPs). Some removal of TOC is achieved through the conventional drinking water treatment processes, while carbon absorption may be used to further enhance the removal of TOC prior to chlorine disinfection.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Protecting of Drinking Water Infrastructure

    Water abstraction points may be affected by spills from farms or factories, and deliberate contamination. Early warning monitoring systems are required to alert operators to these contaminants and to changes in key water quality parameters. A timely response is necessary to prevent contamination and disruption of the public water supply.

    Chelsea Technologies Group has developed FastGuard to observe the natural trends in water quality parameters and rapidly detect and report anomalies.



    FastGuard is ideally suited for early detection of contamination events. It gives prompt reporting and asessment of the threat and has high sensitivity with minimal false alarm rate.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring

    The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol.

    Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before the results are known. Biofouling can be well-advanced before treatment begins. In addition, it is believed that this technique does not detect the full range of microbial life present in cooling systems.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Clean drinking water monitoring solutions for wastewater treatment industry

    Continuous on-line monitoring can be used to alarm unacceptable deviations from established control points and to ensure quality standards are maintained.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Ultrasonic Level Monitoring for Water Bottling Plant Level Control

    Culligan Water installs Greyline SLT32 Level Monitors to control tank levels in their bottling plant in Calgary, Alberta. With non-contacting ultrasonic sensors the SLT32`s control fill and discharge valves in five tanks containing spring water, reverse osmosis water and distilled water.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Water quality testing for drinking water services in remote areas

    In 1985, the University of Surrey in collaboration with Oxfam developed the Oxfam DelAgua Portable Water Quality Monitoring Test Kit. The Oxfam DelAgua kit enables field workers to test water quality in remote and isolated situations and in circumstances where there is no access to a water testing laboratory. Since its development in 1985, the water test kit has been used by all the major International NGO-s and other aid agencies in over 130 countries around the world.

    In 2006, The University of Surrey and other investors founded DelAgua Water Testing Limited to take over the management of the DelAgua organisation. Since then, various improvements have been made, including:

    • The upgrading of all kits
    • The upgrade of the design, manufacturing and distribution functions
    • R&D to produce a portable microbiological testing kit that provides quantitative results in less than 20 minutes.
    • The upgrade of existing services and the introduction of new services, including:
      • Free access to a water quality risk assessment software program on DWT`s website
      • Free access to a library of reference documents on DWT`s website

    In addition to distributing its own kits and consumables, DWT also offers a distribution service for other manufacturers` products. The most popular products are detailed on this website, but those not detailed can also be supplied - DWT is able to source in excess of 60,000 products from numerous manufacturers.

    DWT is committed to providing services and products to enable the provision of clean drinking water for everyone around the world.

    By DelAgua Group based in Marlborough, UNITED KINGDOM.

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Environmental Water Analysis

    Now for the first time you can measure ion levels in drinking / tap water, rivers and lakes using one probe and one set of calibration solutions. We have probes specially tailored for environmental testing. Our Environmental probes measure Chloride, Ammonium and Nitrogen or we have a total nitrogen probe measuring Ammonium and Nitrogen. Each probe can be calibrated in our unique calibration solutions allowing you to calibrate all sensors simultaneously and take measurements in drinking or river water. Probes are also available in our standard four or six ion combinations and can be custom packaged upon request.

    By CleanGrow based in Blackpool, IRELAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you