Only show results available in Virginia? Ok

drinking water operator Applications

  • Water Disinfection for Drinking Water

    Superior Water Quality. Minimal Operating Costs. No Chemical Additives. The water treatment and water distribution up to the delivery point in the house is the responsibility of the water supplier. The owner of the real estate is responsible for sustaining the drinking water quality within the premise. REDO offers in the areas of drinking water supply solutions for the water supplier and solutions for the operators of commercial real estate. The main advantage of water disinfection from REDO: The REDO disinfectant solution in the drinking water is absolutely odourless and tasteless.

    By REDO Water Systems GmbH based in GroƟ-Zimmern, GERMANY.

  • Premium

    Drinking water solutions for the coagulation optimization

    Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization of the polymer dosing heavily depends on the concentration of organics.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Drinking water treatment for consumption in towns

    Drinking water plant AZUD DW to provide the required standard of drinking water for the municipal sector. AZUD DW plants are compact, modular, with solid and easy-handling equipment, fully automated operation and cleaning.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Protecting of Drinking Water Infrastructure

    Water abstraction points may be affected by spills from farms or factories, and deliberate contamination. Early warning monitoring systems are required to alert operators to these contaminants and to changes in key water quality parameters. A timely response is necessary to prevent contamination and disruption of the public water supply.

    Chelsea Technologies Group has developed FastGuard to observe the natural trends in water quality parameters and rapidly detect and report anomalies.



    FastGuard is ideally suited for early detection of contamination events. It gives prompt reporting and asessment of the threat and has high sensitivity with minimal false alarm rate.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Monitoring of Algae in Drinking Water

    The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated with algae groups of a toxic nature. Knowledge of concentrations of algae within the water can assist in determining the loading into water processing plants.

    These in-situ fluorometers are available as single parameter sensors (UniLux), or 3 channel sensors (TriLux).The CTG FastFlow fast repetition rate fluorometer provides information on the physiological state of algae it monitors. As well as providing detailed information on the growth rate of the algae (which can indicate the occurrence of a future algae bloom), it can immediately inform and alarm on toxins that have accidentally or deliberately been introduced into the water systems, as with the FastGuard system. The FastFlow differs from the FastGuard system in that it logs and displays detailed information on the state of the algae monitored for operational requirements.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Water Treatment Solutions for Iron & Manganese Removal

    For treatment of Iron & Manganese removal, AdEdge Technologies uses our AD26 or ADGS+ media coagulation filtration with ferric chloride as the coagulation agent. This process allows significantly higher flow rates per square feet of media, less backwash water than other conventional approaches, and smaller footprint systems which means lower capital and operating costs. There are no hazardous chemicals or waste involved and the systems may be automated which decreases operator involvement and expense.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Pure drinking water solutions for dental offices

    Pure Water premium water distillers allow dentists to take control of their own supply of distilled water so they can ensure patient safety and protect their expensive dental equipment. Distilled water is water that has been boiled, sterilized and purified. Distilled water is an important key in preventing bacteria and biofilm build up in your water lines so you can provide a safe water supply for your patients. Pure distilled water also allows for optimum operation, reduced maintenance and increased lifespan for your autoclaves.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Online water analysers for pure/high purity water

    Pure water and high purity water are crutial factors of production in numerous processees and industries. Depending on the demand it is used as a raw material, auxiliary or operating material. Doing this, it is very important to pay particular attention to the quality of the water, because this is crucial for product quality and safe operation of the production facilities. Therefore, continuous monitoring is essential - from an ecological as well as economic point of view.

    By LAR Process Analysers AG based in Berlin, GERMANY.

  • Premium

    Cooling & Drinkingwater: ATP monitoring of biomass growth in waters

    Monitoring Biomass in (Cooling Tower) Waters through ATP monitoring

    The TOXcontrol can be used for ATP monitoring. Currently our company is doing research for further developments for this application on the TOXcontrol.

    Monitoring the microbial population of cooling towers is necessary in order to maintain the proper operation of the system. Conventional methods for monitoring microbial populations work by culturing microorganisms, a time-consuming procedure that requires days or even weeks of incubation before the results are known. Biofouling can be well-advanced before treatment begins. In addition, it is believed that this technique does not detect the full range of microbial life present in cooling systems.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Industrial and commercial water filtration for process water

    Filtration for Process Water is a widely used term and has a great number of uses dependent on the operation. Filtration for process water or water purification is a process where any undesirable contaminants are removed from the water to ensure it’s suitable for its intended use. The filtrat0ion of process water does not always have to be for drinking water for humans but can also refer to water purification for the use of industrial or commercial applications in a variety of industries include pharmaceutical, chemical, Paper and Textiles, Steel,  Food and Beverage, Plastics, Automotive and many more.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Wastewater Treatment

    AnoxKaldnes responds to the diverse water treatment needs of municipalities around the world with market-leading technologies and processes. Recognized as a world leader in environmental treatment, AnoxKaldnes operates as a supplier of technology and equipment for wastewater and drinking water treatment. Our process know-how has been acquired through years of extensive research and development. AnoxKaldnes`s fundamental philosophy is to offer specific solutions that optimize energy and cost factors. We are changing the look, performance, and reputation of Water and Wastewater Treatment Plants worldwide. For more than 25 years, AnoxKaldnes has designed and developed a wide variety of technologies to protect our most precious resources.

    By AnoxKaldnes AB - a Veolia Water Company based in Lund, SWEDEN.

  • Premium

    Water Monitoring and Flow Measurement Systems for Water Supply

    Although there is enough water on earth, its uneven distribution, the rising population and our carelessness drinking water starts to get short. In the future more and more pipelines for drinking water will be built all over the globe. In order to operate huge and complex pipe networks efficiently, water flow measurement and flow monitoring will become necessary. The increasing efficiency of ultrasonic flow meters will make such calculations more and more effective.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Industrial water TOC and Color removal from water

    All surface waters contain varying amounts of naturally occurring organic acids. The most commonly encountered being tannic and humic. These substances have varying molecular weights and varying amounts of carboxylic functionality. There has been much interest in the removal of these substances from drinking water supplies due to their tendency to form THM`s when chlorinated. They can be removed effectively by use of anion exchange resins operated in the chloride cycle. Because the organics can be removed by regeneration with brine, this technology is far most economical.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Industrial water Ammonia & Arsenic removal from water

    Nitrogen is a nutrient essential to all forms of life as a basic building block of plant and animal protein. Nevertheless, too much of it can be toxic. The processes used for the removal of ammonium ions from drinking waters include ion exchange. PuriTech`s ION-IX system can be broken up into 4 distinctive zones with each zone operating continuously. The resin is initially loaded with the Ammonia ions (and partially calcium and magnesium)in the adsorption zone. As the ION-IX multi-port valve rotates, the resin that has been saturated with Ammonia ions (and some calcium and magnesium ions)moves into a one-bed displacement zone with softened water to ensure hard water does not cause precipitation within the multi port valve.

    By PuriTech Ltd based in Herentals, BELGIUM.

  • Premium

    Water treatment solutions for emergency water supply

    Lenntech can offer containerized drinking water system, skid mounted units and trailer built solutions to meet any local requirements for fast shipment and flexible application use in the most rural areas. Lenntech will be happy to assist any NGO* and other organisations operating in acute relief work in their immediate needs for emergency situations and natural disasters.

    By Lenntech Water Treatment based in Delft, NETHERLANDS.

  • High-calcium lime slurry for water & wastewater treatment industry

    Our NSF certifications allows our product to be used for both the treatment of drinking water as well as the operation of sewage treatment and bio-solid management.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Reverse Osmosis for the mining industry

    Pure Aqua has supplied a number of UF drinking (potable) water systems to the mining industry in Latin America.   In addition, we have been involved nitrate and selenium treatment (RO) for mining operations in Canada.  

    By Pure Aqua, Inc. based in Santa Ana, CALIFORNIA (USA).

  • Solar-powered Irrigation

    EkoRE provides solar-powered irrigation services to help communities lower costs and access the water they need. Depending on the intended use, solar-powered irrigation systems can transport water from one location to another and draw water from underground sources, allowing farmers to irrigate their crops or provide communities access to potable drinking water. Using solar energy to generate electricity requires little to no operation and maintenance costs.

    By Eko Renewable Energy Inc. (EkoRE) based in Istanbul, TURKEY.

  • LifeFilta R20 Container & LifeFilta TapFilta for disaster relief

    In any disaster relief operation, the biggest problem faced by aid agencies is the logistics and cost involved to deliver safe drinking water to the victims. We have seen plane loads of bottled water being transported to the site of the disaster, hundreds of people are hauled up to unload the cargo and finally each family gets a carton of bottled water, which may last a maximum of 3 days. Compare this with our LifeFilta straw or bottle which can last for a few years. With our LifeFilta R20 container, a family can have clean water for up to 5 - 10 years. The money and time saved by aid agencies can be diverted to other forms of aid such as food and medical supplies.

    By LifeFilta based in Tongeren, BELGIUM.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you