Superior Tank Co., Inc. manufacturers bolted and welded steel storage tanks for potable water applications. Superior Tank Co., Inc. builds water storage tanks to meet AWWA and NSF 61 Standards. Our bolted steel water storage tanks are manufactured to be installed in 1/3 the time as other storage tanks, are easy to maintain, service and repair.
By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the...
Drinking water plant AZUD DW to provide the required standard of drinking water for the municipal sector. AZUD DW plants are compact, modular, with solid and easy-handling equipment, fully automated operation and cleaning.
Carus permanganates have been used in private and public drinking water applications for more than 40 years. Municipal drinking water plants use CAIROX® and AQUOX® potassium permanganates, and CARUSOL® liquid permanganate in both ground water (well) and surface water for Pretreatment, Pre-oxidation and Organics Removal. Today, municipal water providers face increased challenges as more stringent regulations are enacted and public awareness regarding water quality becomes heightened.
Either small scale remote drinking water plants or large scale municipal drinking water facilities will benefit from DyVaR technology. DyVaR is applicable for one-step treatment of briny liquids to produce the highest quality of drinking water. In large scale applications with several treatment steps, DyVaR is well suited to treat IX regenerate streams or the concentration of brines streams originating from conventional water treatment systems.
Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization...
Culligan Water installs Greyline SLT32 Level Monitors to control tank levels in their bottling plant in Calgary, Alberta. With non-contacting ultrasonic sensors the SLT32`s control fill and discharge valves in five tanks containing spring water, reverse osmosis water and distilled water.
Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.
Problem: Drinking water plants that use chlorine for disinfection must ensure organic matter is removed before chlorination to limit the formation of harmful disinfection by-products (DBPs), most commonly Trihalomethanes (THMs) and Haloacetic acids (HAA5).
The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated...
GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.
Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a...
Fluoride is a naturally occurring mineral in the soil in some areas of the country. It can leach into the drinking water supply. At low levels, it is not considered to be harmful. In fact, many water treatment plants add fluoride to the water because fluoride has been shown to help decrease tooth decay. However, higher levels can be hazardous to our health.
Fluence has more than 30 years of experience in the design, construction, and operation of water and wastewater treatment plants for municipal clients, government entities, communities, emergency relief, and private use.
Fluence delivers decentralized, co
Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and...
Applications of 254nm amalgam UV lamp
Municipal Sewage Water Treatment
Urban Drinking Water Treatment
Swimming Pool and Spa Water Treatment
Ventilating duct and air-conditioning system
Applications of 185nm amalgam Lamps with Ozone
Kitchen Exhaust Cleaning
Urban Drinking Water Treatment
Swimming Pool and Spa Water Treatment
High Purity Process Water Disinfection
Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometri...