Only show results available in Virginia? Ok

drinking water treatment plant Applications

  • Premium

    algae control in drinking water plants

    By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Drinking water treatment for consumption in towns

    Drinking water plant AZUD DW to provide the required standard of drinking water for the municipal sector. AZUD DW plants are compact, modular, with solid and easy-handling equipment, fully automated operation and cleaning.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Water Treatment Solutions for Fluoride Removal

    Fluoride is a naturally occurring mineral in the soil in some areas of the country. It can leach into the drinking water supply. At low levels, it is not considered to be harmful. In fact, many water treatment plants add fluoride to the water because fluoride has been shown to help decrease tooth decay. However, higher levels can be hazardous to our health.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a turnover of those levels, bringing sediment, plants, and algae to the top.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Drinking water analysis for municipalities

    GE Analytical Instruments offers several Sievers TOC Analyzer models designed specifically to simplify monitoring of drinking water treatment plants. Always knowing the TOC levels throughout a water treatment plant, and improving TOC reduction, can help a plant not only control DBPs, but also implement efficient and potentially cost saving treatment processes.

    By GE Analytical Instruments based in Boulder, COLORADO (USA).

  • Premium

    Drinking water solutions for the coagulation optimization

    Problem: Drinking water plants that use surface water or ground water under the influence of surface water are susceptible to high levels of organic matter in the raw water. Reduction of organic matter through coagulation/sedimentation and filtration is important to lower the potential for disinfection by-product formation (DBP) and limit operational problems. In addition, organics in water consume the polymers used for the coagulation process, which reduces the efficiency of the treatment. Therefore, optimization of the polymer dosing heavily depends on the concentration of organics.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Wastewater Treatment

    AnoxKaldnes responds to the diverse water treatment needs of municipalities around the world with market-leading technologies and processes. Recognized as a world leader in environmental treatment, AnoxKaldnes operates as a supplier of technology and equipment for wastewater and drinking water treatment. Our process know-how has been acquired through years of extensive research and development. AnoxKaldnes`s fundamental philosophy is to offer specific solutions that optimize energy and cost factors. We are changing the look, performance, and reputation of Water and Wastewater Treatment Plants worldwide. For more than 25 years, AnoxKaldnes has designed and developed a wide variety of technologies to protect our most precious resources.

    By AnoxKaldnes AB - a Veolia Water Company based in Lund, SWEDEN.

  • Waste water plant

    Applications of 254nm amalgam UV lamp Municipal Sewage Water Treatment Urban Drinking Water Treatment Swimming Pool and Spa Water Treatment Ventilating duct and air-conditioning system Applications of 185nm amalgam Lamps with Ozone Kitchen Exhaust Cleaning Urban Drinking Water Treatment TOC Reducing Swimming Pool and Spa Water Treatment High Purity Process Water Disinfection

    By CREATOR UV&IR Lighting CO.,Ltd based in Guangzhou, CHINA.

  • Premium

    Algae monitoring of drinking water reservoir -

    Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometric detection at 665 and 750 nm). The results of the off-line standard lab method show a good correlation with the measurements of the ALGcontrol. The good correlation can be verified as well at high as at low concentrations of total chlorophyll.

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Premium

    Mining & minerals solutions for man camps industry

    In remote locations and mine sites distant from the nearest outpost, WesTech provides package plants for water treatment and for wastewater process that allow for drinking water to be made onsite and basic levels of sanitary safety to be met, allowing for continued production and a healthier site and workforce.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you