Only show results in Virginia? Ok

drinking water well Applications

  • Drinking Water

    Ensuring safe drinking water is a complicated and resource intensive process involving stringent state and federal requirements. Failures in the system are not only costly but can pose serious threats to public health. Pumping tests provide needed data to ensure proper flow and aquifer levels. With DriveConnect technology in place it is possible to significantly minimize expensive lift station drawdown testing.

    Drive‑Chat enabled solutions can reduce costs with automated alerts and remote anywhere anytime access.

    With Drive‑Chat you can:

    • Monitor every pump in the system
    • Efficiently control pumps
    • Check well health
    • Receive real-time alerts before major failures occur
    • Customize alerts per specified conditions

    By DriveConnect based in Brandon, FLORIDA (USA).

  • Water oxidation for private an public drinking water

    Carus permanganates have been used in private and public drinking water applications for more than 40 years. Municipal drinking water plants use CAIROX® and AQUOX® potassium permanganates, and CARUSOL® liquid permanganate in both ground water (well) and surface water for Pretreatment, Pre-oxidation and Organics Removal. Today, municipal water providers face increased challenges as more stringent regulations are enacted and public awareness regarding water quality becomes heightened.

    By Carus Corporation based in Peru, ILLINOIS (USA).

  • Monitoring of Algae in Drinking Water

    The UniLux in-situ fluorometer can be configured to detect a number of key parameters that are of importance to the Water Supply Industry. Primarily, the detection of Chlorophyll a in stored water systems, such as reservoirs, assists in the planning and informs decisions on water abstraction in relation to natural algae blooms that regularly occur throughout the year. As well as Chlorophyll a, these in-situ fluorometers can detect cyanobacterias, such as Phycocyanin and Phycoerythrin, which are often associated with algae groups of a toxic nature. Knowledge of concentrations of algae within the water can assist in determining the loading into water processing plants.

    These in-situ fluorometers are available as single parameter sensors (UniLux), or 3 channel sensors (TriLux).The CTG FastFlow fast repetition rate fluorometer provides information on the physiological state of algae it monitors. As well as providing detailed information on the growth rate of the algae (which can indicate the occurrence of a future algae bloom), it can immediately inform and alarm on toxins that have accidentally or deliberately been introduced into the water systems, as with the FastGuard system. The FastFlow differs from the FastGuard system in that it logs and displays detailed information on the state of the algae monitored for operational requirements.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Water Treatment Solutions for Uranium Removal

    AdEdge provides treatment systems for for Uranium removal using AD92 an anion exchange media that is ideal for use in potable water as well as non-potable and environmental remediation applications for removal of naturally occurring uranium. The high efficiency AD92 can selectively remove the negatively charged uranium anion (most often in the form of uranyl carbonate) to below the existing EPA MCL of 30 ug/L. The AdEdge AD92 systems can deliver the needed performance in two ways: (1) via regeneration type systems which use the media to remove the uranium with periodic regeneration using NaCl brine; or (2) as a “throw away” discardable media, which can be discarded when spent. This option maximizes the very high capacity of the AD92. Where on-site regeneration is not available, this disposal option is the preferred option. Disposal options will vary based on federal, state, and local regulations.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Pure drinking water solutions for high-security facilities

    In June 2002 an Al-Qaeda cell was captured in Rome just before they poisoned the water supply of the US Embassy. This event demonstrates the added risk that government buildings, military contractors, royal palaces and other high-security facilities can encounter. These facilities should not trust an outside company to deliver bottled water, but instead must stay in full control of their own water supply at all times. Our secure drinking water systems are in over 100 US Embassies around the world because they provide a consistent supply of fresh, distilled water, which is the highest level of protection against the full range of possible contaminants. We provide premium water distillers for these high-security facilities as well as small systems to protect the staff at home. We also provide risk assessment and water education services.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Algae monitoring of drinking water reservoir -

    Due to green algae problems in the water reservoir of a drinking water treatment plant, the ALGcontrol was installed to continuously monitor the algae concentrations and possible toxic blue green algae blooms. During almost 4 months the ALGcontrol measured the total chlorophyll and cyano chlorophyll concentrations of the water reservoir. In order to be able to compare these results, second off-line controls were carried out using the ISO 10260 chlorophyll-a quantification (extraction into ethanol, spectrophotometric detection at 665 and 750 nm). The results of the off-line standard lab method show a good correlation with the measurements of the ALGcontrol. The good correlation can be verified as well at high as at low concentrations of total chlorophyll.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Pure drinking water solutions for tea & coffee shops

    A CUP OF TEA IS OVER 99% WATER, so is it any surprise that the quality of water that you use makes such a huge difference in the taste, appearance and smell of your beverage? By using fresh, purified water you are ensuring a consistent, excellent tasting product every time. Your customers will be amazed and will not want to go anywhere else, especially after they learn that it’s healthier too. An added benefit is ice tea that stays fresh much longer as well as greatly reduced maintenance on your machines. Our systems provide the best water for making tea and coffee, they are completely automatic, waste hardly any water and are easy to maintain.

    By Pure & Secure, LLC. based in Lincoln, NEBRASKA (USA).

  • Premium

    Industrial valves solutions for the water & wastewater industry

    Whether during the transport or treatment of municipal or industrial wastewater, or during the production and treatment of drinking water - valves and actuator technology by EBRO are uncompromisingly made for these applications. The range covers butterfly and check valves as well as knife gate valves for the use with very dirty fluids. All used materials - from the body over elastomers to the smallest screw - comply with the rules of the DVGW and are accordingly admitted. Hence valves by EBRO make their contribution to the preservation of water quality from the abstraction to the delivery for the end user.

    By EBRO Armaturen Gebr. Bröer GmbH based in Hagen, GERMANY.

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Activated Carbon Filtration for the Water Filtration Industry

    General Carbon carries a complete line of activated carbon made from coal, coconut shell and wood for most liquid phase applications.  These include acid washed activated carbon for drinking water and food grade applications as well as products suitable for waste water remediation, decolorization applications, chemical and pharmaceutical purification. Additionally, our specialty medias are best for the treatment of non-emulsified oils and heavy metals. Our stock of activated carbon for liquid phase applications are all NSF certified, meaning that they are approved for treatment of food grade applications.


    By General Carbon Corp. based in Paterson, NEW JERSEY (USA).

  • Water Storage for the Agriculture Industry

    Superior Tank Co., Inc. provides bolted and welded steel storage tanks for drinking water, water for livestock, water for irrigation, rain harvesting as well as other typical uses. Our adherence to AWWA standards assures that you will have contaminant-free water.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Membrane Filtration for Wastewater Treatment

    The essential challenges of today are to ensure cost effective treatment and recycling processes for water and wastewater. Membrane technology solves this task by being an innovative and trendsetting technology. Today membranes are successfully used for the treatment of municipal and industrial wastewater as well as for the production of drinking and process water from surface water. Membrane technology and membrane bioreactors (MBR) are especially important in arid zones for the recovery of clean water for reuse from wastewater. This enables the sustainable management of water resources ensuring availability and effective utilization.

    By MICRODYN-NADIR based in Wiesbaden, GERMANY.

  • High-calcium lime slurry for water & wastewater treatment industry

    Our NSF certifications allows our product to be used for both the treatment of drinking water as well as the operation of sewage treatment and bio-solid management.

    By Sudbury Lime Ltd. based in Copper Cliff,, ONTARIO (CANADA).

  • Using evaporation to dewater Reverse Osmosis reject waste streams

    Reverse Osmosis (RO) technology has been used for years in various industries to separate dissolved solids from water by forcing the water through a semi-permeable membrane. RO is also commonly used to purify drinking water and desalinate seawater to yield potable water. The water and other molecules with lower molecular weight (specific weight of molecules allowed to pass through is dependent on the selected membrane) pass through the micropores in the membrane, yielding a purified water stream called the permeate. Larger molecules are retained by the membrane as well as a portion of the water that does not pass through the membrane. This concentrated stream is called the concentrate or RO reject.

    By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).

  • Continuous Monitoring of Nitrates and Other Water Quality Parameters

    Nitrate is one of the most important parameters in assessing surface and ground water quality. Nitrates are naturally present in surface and ground waters in low concentrations, but are harmful to humans and livestock and cause aquatic ecosystem degradation in high concentrations. Nitrates enter the environment as human-induced pollution from a variety of sources, but the largest source is from agricultural fertilizer runoff . Other sources include wastewater treatment discharge, septic systems, and from pet waste. Nitrate is highly soluble in water and therefore readily leaches into water sources, whereas other human associated pollutants, such as phosphates and ammonia, are not transported as easily. This ability to be quickly transported into ground and natural waters such as drinking water wells, aquifers, reservoirs, lakes, and streams, coupled with its health and environmental implications make nitrate pollution and monitoring of major concern.

    By Hanna Instruments, Inc based in Woonsocket, RHODE ISLAND (USA).

  • Water Data Management Solution for Groundwater Monitoring

    Deployed across all relevant sectors including landfill security, well field monitoring programs, pumping tests, and drinking water supply, KISTERS solutions can be used to measure groundwater data.

    By KISTERS AG based in Aachen, GERMANY.

  • LifeFilta R20 Container & LifeFilta TapFilta for rural areas

    Many villages have no access to clean drinking water. Many still depend on wells, rivers and streams as their source of drinking water. To give water is to give life. Clean water can cut a community’s child mortality rate in half. It gives parents a powerful way to improve the health, hygiene, and the well-being of their children. The R20 Jerry Can would also be suitable for workers living in remote areas to obtain safe drinking water. The R20 can be filled with water from any source; river, lake, pond or stream and instantly provide clean and safe water. A family of five can use the R20 container for more than 5 years (assuming each person consume 2 liters of water per day). No replacement parts would be required.

    By LifeFilta based in Tongeren, BELGIUM.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you