Only show results available in Virginia? Ok

drum separation Applications

  • High performance separation system for caustic treating industry

    The key aspects of a caustic treating system pertain to the degree of contact between the caustic and hydrocarbon to facilitate the mass transfer. Increasing the specific surface area of contact in a two phase system necessarily creates a tight emulsion. The product hydrocarbon often contains entrained caustic, which is not easily recovered by a simple water wash followed by a separator drum. The spent caustic is often regenerated with sour-naphtha stream that is used to extract the disulfide oils into the hydrocarbon phase.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Industrial Meshes for Solid-Liquid-Filtration

    SolidWEAVE stainless steel filter media for solid-liquid-filtration are the basis for a wide range of industrial process steps. They are used successfully in various filtration devices like cartridge filters, drum filters, vertical pressure leaf filters or centrifuges.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Premium

    Magnets for the steelworks and slag processing industry

    A wide range of equipment such as Drum Magnets and Overbands can be utilised to separate ferrous metals in steelworks and slag processing applications.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Magnets for the packaging industry

    Contamination free product is ever important, The Master Magnets range of Magnetic Grids, Plate Magnets, Drum Separators and Bullet Separators remove ferrous contamination from many types of packaging material. Metal Detectors can then be utilised to ensure complete protection against any metallic content.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Recycling equipments for ferrous scrap metal shredding & recycling

    Ferrous scrap metal includes metals that can be reclaimed for use through traditional ferrous scrap recovery systems. These metals include a wide variety of light ferrous scrap such as sheet steel, 55 gallon drums, white goods, and other forms of loose tin. Heavier ferrous scrap can be processed through the Saturn hammermill line of shredders which also produce a more consistent, higher density shred. Shredders prepare the metals for further separation or directly to end ferrous scrap consumers. Additional Granutech machinery such as the MAC Magnum Logger, or MAC Big MAC auto crusher can compact and densify larger ferrous items reducing transportation costs.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Recycling equipments for shredding solid waste & municipal solid waste

    Solid waste and municipal solid waste (MSW) size reduction requires processing of many different materials, from filled drums to household waste. And, as the amount of solid waste increases and the cost of landfill management increases, it is becoming more critical that waste management become more effective, economic and efficient. Shredded and compacted waste is easier and cheaper to transport and extends the life of the landfill. In addition, separating out materials that can be reclaimed and recycled or that need to be incinerated or composted increases the landfill productivity while providing revenue to offset the costs of processing the solid waste.

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Magnets for the wood processing industry

    Master Magnets supply a range of ferrous and non-ferrous magnetic separators for wood processing applications. Overband Magnets, Suspension Magnets and Magnetic Conveyor Pulleys are all commonly used in this sector for the removal of tramp ferrous contaminants. Eddy Current Separators are also often used to recover aluminium, brass, copper and other valuable non-ferrous metals, leaving a clean, metal-free end product. Drum Magnets, Magnetic Pulleys and Overband Separators are used to remove nails, screws and other ferrous contaminants from shredded timber. Eddy Current Separators can also be used to then remove any non-ferrous metals such as aluminium.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Recycling and processing of shredder heavy fraction

    Since 1991, the bi-directional dense medium separation technology for the recycling of automobile and industrial wastes is being used. For many years a principle client in this regard has been the Group Galloo.  Group Galloo owns currently 50% of the AD REM shares. At first the Galloo staff was not convinced that a carrot separator could compete with the classical dense medium separators on the market at that time. So they set up a trial on +12 mm automobile shredder residue, running half of the test material through a conventional drum and the other half through this modified bi-directional carrot separator.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Automotive Shredder Residue Drying

    Getting economic value from landfill waste like automotive shredder residue (ASR) is a big challenge that can have a big payoff. Vulcan® Systems Drying Technology is the key component of material preparation when separating ASR waste to reclaim energy and metals. Vulcan® ASR Dryer Systems are manufactured to suit each client’s individual project needs and custom-designed specifically to dry ASR, making the material easy to transport, separate, and handle. This drying system consists of a drum with a burner that is mounted to a combustion chamber. Shredder residue is fed into the rotary dryer. After passing through the system, the dried material is discharged to a transfer conveyor for further sorting and separation. The vapor from the process is pulled through a cyclone that is specifically designed to deal with the fine ASR dust, as well as a high-temperature baghouse that removes additional fine particulates from the vapor stream.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you