Only show results available in Virginia? Ok

dust control Applications

  • Sand and Dust control/stabilisation

    PermeatecDS is a unique polymer technology developed by TAL and is aimed specifically at the control of dust and stabilisation of loose, granular materials. PermeatecDS can be applied to such materials – as an aqueous surface spray – to control dust and provide a hard, durable surface. In addition, it can be mixed directly with loose, granular material to provide a solid block of material. PermeatecDS is a complex acrylate-based polymer system, designed to be dispersed in water, aiding application and improving safety/handling. The polymer is able to coat and bind loose materials, forming a complex web of interlocking particles and polymer, which – when dried – form a hard, durable material. The ability to change application rates, provides the user with precise control and allows stabilisation levels, strength and durability to be tailored as required.

    By Technical Absorbents based in Grimsby, UNITED KINGDOM.

  • Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism requires 80 cfm of compressed air at 80-100 psi to function properly. How it Works Easy-to-load, cabinet lid forms seal Automatic and programmable cleaning cycles take 3-5 minutes to complete Injection Self-Cleaning System (ICS-360) blows particulate off every part of the filter Dust and debris drawn out by a powerful cyclone collector and safely stored in a 55 gallon drum Optional Filter Inspection Station and Diesel Filter Inspection Station can be used to measure restricion levels and filter integrity Features Injection Self-Cleaning System (ICS-360) ? Adjustible for diverse filter diameters and heights ??User Friendly Controls with LCD status display? Cyclone - 1,400CFM @ 4` static pressure 55 gallon dust barrel included

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Premium

    Gas monitoring and dust monitoring for the power industry

    LaserGas measurements

    • Boiler combustion control, O2 and CO
    • DeNOx system, NH3 and NO
    • Electrostatic precipitators (ESP), CO monitoring for explosion prevention
    • Stack gas emissions, NH3, H2O, NO
    • Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants)

    LaserDust measurements

    • Stack gas emission
    • Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Dust collection and odor control in waste management sites

    Th turn key plant is composed by three different wet stages. The first stage is a venturi jet scrubber to collect dust and particles, then the second and third stages are deputed to absorb bad smells, such as H2S, Ammonia and Ammines. The absorption takes place thanks to the injection of chemicals (such as Sulphuric Acid, Sodium Hypochlorite and Sodium hydroxide.

    By F.G.M. engineering srl based in Santa Croce sull`Arno, ITALY.

  • Premium

    Gas monitoring and dust monitoring for the steel industry

    • Blast furnace offgas, combustion control, CO, CO2, O2
    • Converter (Basic oxygen furnace BOF)
      • CO gas recovery
      • O2 measurement for explosion prevention
    • Electric arc furnace offgas, combustion control, CO, O2, H2O
    • Reheating furnaces, O2
    • Coking plant
      • CO analysis in oven offgas
      • O2 analysis for explosion prevention in raw coke gas or after tar precipitator
      • NH3 measurement after scrubber
      • H2S measurement after scrubber

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Premium

    Odour & emission control for muncipal landfills

    Mechanical barriers that seal in odors, volatile organic compounds (VOCs), volatile nitrogen compounds (such as ammonia), volatile sulfur compounds (such as H2S) and, of course, fugitive dusts in municipal landfills.

    By Rusmar Inc. based in West Chester, PENNSYLVANIA (USA).

  • Premium

    Odor control for the poultry feed production

    The animal feed industry has its roots in the way traditional millers grinded the grains centuries ago, using (wooden) windmills. Nowadays feed is produced for chickens and other poultry, as well as for cattle, pigs and horses. There is a wide variety of feed and grains produced, with different raw materials (nutrients) applied in several compositions.

    In this modern era electric driven pellet mills are applied and grains are cooled mainly in counterflow coolers. To remove dust from the used cooling air usually a baghouse filter is being used which can meet the current severe dust emission standards. After this the air eventually will be blown outside. Especially the cooling air of poultry feed and pig feed production should be deodorized to prevent complaints.

    A factory usually has multiple pellet lines in service with about 15,000 to 25,000 m3/h of cooling air per line. Aerox has developed specific solutions for this industry.

    On the one hand a compact Aerox®-Injector can be installed per pellet line. On the other hand, airflows of different production lines can be joined together and can be treated with one compact Aerox®-Injector. In practice, this can be added up to 4 lines with a total airflow of up to 90,000 m3/h.

    Since the Aerox®-Injector can run on different capacities unnecessary power consumption is prevented when not all pellet lines are in service. This benefits the environment and reduces operational costs.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Premium

    Odor control for the fish feed production industry

    In the Fish feed process the product is usually conducted to the dryer through pneumatic transport, after which it falls out from the dryer into the cooler. Odour sources in this process are the flash- off of the extruder, transport air, dryer air and possibly also air from the cooler.

    The amount of air per line that is emitted and should be deodorized depends amongst others of the type of dryers/coolers (vertical or horizontal), but also whether air is recycled from cooler to the dryer.

    One compact Aerox-Injector can treat the total amount of air coming from a complete production line at all times. In many cases it is even possible to treat combined airflows of multiple production lines with one Aerox-Injector!

    We are happy to advise you what (cost) technically will be the best solution. The Aerox-Injection technology prevents pollution of the Aerox-Injector by dust or greasy air in this process. This will guarantee the performance and will keep your neighbours really satisfied.

    By Aerox B.V. based in Vleuten, NETHERLANDS.

  • Premium

    Applications and Air Pollutants Removed in the Fertilizer Industry

    Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and recovery/reconcentration of fluorosilicic acid up to 25% concentration.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Continuous emissions monitoring for chemical industry

    Process control and emissions monitoring in a chemical plant is a challenge due to corrosive gases, high dust load, and high temperatures. To use an extractive system in this environment will demand a lot of maintenance.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Storage and Loading Areas

    The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and consultation phase.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Open-Pit Mining

    High volumes of dust, often extending over large areas, present a major challenge for the operators of opencast mines. If weather conditions are dry and windy, the dust will affect not only the workforce but also entire housing estates in the vicinity. The sources of dust at open-pit facilities are frequently distributed over very large expanses. With their large projection range, EmiControls dust-laying sprayers are the ideal solution. Mobile versions of the machines can be moved easily and therefore used to control dust at various sources.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Recycling and Composting

    The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and disposal of contaminated soil from industrial sites.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Air cleaning system for the airports sector

    Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system. This feature is very important in airports in the control of jet exhaust fumes that migrate into fresh air intakes.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Demolition Work

    Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work is completed.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Tunnel Construction and Underground Mining

    Dust can pose a particular hazard for people working in enclosed spaces such as in tunnel construction and deep mining. As the workers inhale, dust gets into their airways and can cause health problems. Poor visibility brings added exposure to risk. A reduction in the amount of dust generated also lengthens the service life of the machines. Therefore efficient dust control is particularly important in this industry.

    By EmiControls based in Bolzano, ITALY.

  • Premium


    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Biomass Plant Emissions Monitoring (CEMS)

    Procal´s analysers are used extensively in reporting and control applications in modern Biomass plants. The flexible and reliable instruments form the heart of the systems, enabling CO, NO2, NO, SO2, H2O, CO2, O2, dust and velocity to be measured.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Fly Ash Disposal Cover

    LSC has two distinct products that address the unique challenges common to fly ash monofills. For sites interested in long-term solutions for dust, leaching, and erosion, Posi-Shell Environmental Coatings deliver a nearly impenetrable cover that lasts for years. For sites only interested in dust control, our all-natural and biodegradable product, Posi-Clear, reduces fugitive dust by bonding surface fines into a long lasting cohesive layer. Posi-Clear is not a chloride or a P.A.M. which makes it environmentally friendly.

    By LSC Environmental Products, LLC based in Apalachin, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you