Only show results available in Virginia? Ok

dust removal system Applications

  • Premium

    Applications and Air Pollutants Removed in the Fertilizer Industry

    Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and recovery/reconcentration of fluorosilicic acid up to 25% concentration.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Lead Paint Removal

    No respirator required. No containment structures. Osha, epa,  rcra & sspc compliance. Combine removal, containment and final packaging into a one-step process using Pentek’s complete lead paint abatement system. The fully integrated process reduces or eliminates the need for worker respiratory protection by reliably reducing hazardous dust emissions far below regulatory requirements.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Premium

    Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Pulp and Paper Industry

    Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC gas streams. Complete fugitive lime dust collection systems to handle emissions from conveyors, elevators and feeders. Smelt dissolving tank particulate and TRS gases. Direct contact waste heat recovery. Black liquor evaporation. Treatment and subcooling of boiler and kiln gases to remove particulate, sulfur dioxide and TRS for precipitated calcium carbonate production (PCC). Dust from tissue and paper rollers and dryers. NASH and sodium hypochlorite scrubbing. Waste heat recovery with direct contact heat exchangers.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Concrete Scabbling

    When concrete is contaminated with PCBs, radiation or other hazards, scabbling is often the only means of remediation. By removing a thin outer layer from a concrete surface, our shrouded power tools can make a structure safer for occupancy or demolition. Our powerful VAC-PAC® HEPA vacuum captures all dust, debris, and air-borne contaminants for easy transportation and disposal in standard 55-gallon (200L) drums. Whether you’re applying a new coating system or  a concrete overlay, a Concrete Surface Profile number (CSP 1-9) is often specified according to ICRI’s Technical Guideline No 310.2R. The examples below illustrate how Pentek tools can achieve your requirements:

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

  • Premium

    Air cleaning system for the performance contracting

    High Efficiency Air Cleaning – Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. When properly applied Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Air cleaning system for the office buildings

    According to the U.S. Environmental Protection Agency, we spend over 90% of our time indoors. Much of this time is spent in our offices. Studies show that cleaner air in office buildings can improve productivity and reduce absenteeism. High Efficiency Air Cleaning – Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. When properly applied Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Air cleaning system for the gaming

    Casino operators were some of the first to be able to put a price tag on indoor air quality and to realize the impact that IAQ has on customer traffic. As a result, you’ll find more Dynamic Air Cleaners in casinos than any other high efficiency air cleaners. Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Air cleaning system for the food processing

    Clean air is of major importance in food processing and food prep areas. Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including bacteria, allergens, fine dust, odors and VOCs…without producing any harmful ozone. Dynamic Air Cleaners can extend shelf life and reduce scrap by capturing airborne impurities.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Air cleaning system for the airports sector

    Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system. This feature is very important in airports in the control of jet exhaust fumes that migrate into fresh air intakes.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Air cleaning system for the higher education areas

    Dynamic Air Cleaners are an ideal indoor air quality solution for schools, colleges and universities. Without sacrificing budgets, higher education institutions can utilize these highly-versatile air cleaners to lower energy costs and establish greener, healthier learning environments for teachers and students. A report from The American Institute of Architects, The Redford Center, ICLEI USA – Local Governments for Sustainability and the U.S. Green Building Council (USGBC) estimates inefficiency costs the average school $100,000 each year. The report also states 14 million students attend schools considered below standard or dangerous, with more than 15,000 schools having air deemed unsafe to breathe. Generating a return on investment in three to five years, Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss, including odors, smoke, bacteria, allergens, fine dust, mold and pollen, without producing any harmful ozone.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you