Only show results available in Virginia? Ok

e-waste volume Applications

  • Premium

    Very large waste gas volumes with low contaminant concentration

    The CTP desorption allows for an especially high concentration factor which, in turn, reduces the cost of ownership and permits an auto-thermal operation (additional burner switched off) even when the contaminant concentration is low.

  • Premium

    Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Shredders for Hazardous and Medical Waste

    SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.

    By SA Eng Soluzioni per l`Ambiente based in San Donà di Piave, ITALY.

  • Premium

    Shredders and crushers for special waste recycling

    Stopping the spread of hazardous waste! Ever-increasing consumption across Europe, coupled with rising prosperity among the populations of the typical emerging economy are causing a sharp upturn in the volume of waste worldwide. The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH shredding machinery and plant, there is a perfect set of solutions for meeting any of these challenges in special waste applications.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Waste Sorting - Organic Waste Sorting

    The total waste volume contains a high percentage of organic material. This fraction is treated in different ways depending on country. Within the organic fraction, the inert material can cause significant problems during the different treatment processes. For this reason, the inert material content has to be reduced to a minimum in such a way that loses as little organic material as possible. The total waste volume contains a high percentage of organic material. This fraction is treated in different ways depending on country. Within the organic fraction, the inert material can cause significant problems during the different treatment processes. For this reason, the inert material content has to be reduced to a minimum in such a way that loses as little organic material as possible.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Waste shredding for the landfill industry

    However enormous a landfill site first appears, it is surprising how quickly - and how ineffectively - it can become full. Regardless of how bulky, resilient or abrasive the waste may be, effective shredding makes best use of the space available by considerably reducing the volume of waste. Metso shredder equipment includes three sizes of mobile shredders with a variety of mounts, all capable of providing a range of grain sizes. This makes it easy to select the most efficient and cost effective shredding solution for a wide variety of landfills.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Premium

    Production waste and hazardous waste shredding with Mercodor shredding systems

    Mercodor crushing machines are used for crushing production waste and also for the volume reduction of hazardous waste. In order to a better storage of production and hazardous waste the volume must be reduce. Mercodor special engineering is your partner for professional shredding of production waste and for the crushing of hazardous waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Industrial air pollution control for the recycling and waste management

    Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

  • Premium

    Shredding Industrial waste with Mercodor shredding systems

    Mercodor shredders for shredding of industrial waste are being widely used. So the crushing of industrial waste will reduce the waste volume and thus will be reduce costs, at the same time the shredding of industrial waste will protect the environment. Mercodor special engineering is your partner for professional shredding of industrial waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding Commercial waste with Mercodor shredding systems

    Mercodor shredders for shredding of Commercial waste are being widely used. So the crushing of Commercial waste will reduce the waste volume and thus will be reduce costs, at the same time the shredding of Commercial waste will protect the environment. Mercodor special engineering is your partner for professional shredding of Commercial waste.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Electronic scrap shredding for the electronic waste management industry

    One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Waste Compaction for the PET & Plastic Bottles Industry

    PET and other rigid plastics are usually made from either PET, high density polyethylene (HDPE), polypropylene (PP) or polystyrene (PS) – the hard, not expanded type. Recovered items such as bottles, pots and containers can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs.

    HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Decanter centrifuge & cuttings for drilling waste management & disposal

    Drilling waste management and cuttings disposal have become a critical issue for any drilling operations because of stringent effluent limitations on the discharge of contaminated drill cuttings to the environment. The wastes discarded by the drilling mud circulation system must be disposed in safe way to the environment. GN Solids Control offers Vertical Cuttings Dryer and Big Bowl Decanter Centrifuge to dramatically reduce total volume of drilling wastes to diposal and revover much clean fluids back to the mud circulation system. GN offer a complete package of drilling waste management tank system as well.

    By GN Decanter Centrifuge Ltd based in Hebei, CHINA.

  • Premium

    Waste Compaction for the Plastic Packaging Film Industry

    Normal, clear or coloured packaging film is usually made from polyethylene (PE) and is the most widely recycled plastics material. Recovered waste material such as film, bags, sacks and pallet wrap, can all be baled sold on to recycling companies. If you’re unsure which type of plastic waste your business generates, we can help you identify it and recommend the best solution for your needs.

    HSM provides balers for use with plastics in many different scenarios from small volumes, with the aim of creating a tidy, efficient work area is the main aim through to demanding, high volume situations where a baler which can deal easily with throughputs of many bales per hour is required.

    Our new generation of modern balers have been created to use low levels of energy, generate a minimum level of noise and operate without the need for constant supervision.

    By HSM GmbH + Co. KG based in Frickingen, GERMANY.

  • Premium

    Scrap metal shredding

    Shredding of metals for volume reduction can simplify material handling, minimize storage space and reduce transportation and disposal costs. SSI has built shredders to process light scrap in a metal recycling yard, or materials generated by a manufacturer, such as aluminum extrusion from a door or window manufacturer. SSI shredders have also been used to prepare metals to feed into high-speed hammermills.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Vacuum systems in residential areas

    As waste volumes continue to grow, more and more stringent demands are being made of waste handling with regard to hygiene and the environment. The Envac vacuum system for waste handling in residential areas is a long-term investment offering both financial and environmental benefits, as well as other added value.

    By Envac AB based in Stockholm, SWEDEN.

  • Remote level monitoring

    Leachate level control is a primary function in landfills. Although different types of pumps are used, all pumps need to be installed with a totalizing counter mounted at the top of the well head to monitor the pump cycles and to calculate the total volume of leachate removed from the well. Instead of manually monitoring the leachate level and collecting the pump count data, use FlexPower™ Counter Nodes to wirelessly send data from the pumps back to a central control location to save time and eliminate errors.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Premium

    Shredders and crushers for refrigerator recycling

    Erdwich reclaims even Pentane and CFCs with 99% purity! Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Cardboard shredders for cardboard recycling

    Makes even the biggest mountains of cardboard into molehills! Every year, Germany produces around 10 million tonnes of cardboard and paperboard for the packaging industry. After their use, these items of cardboard packaging and boxes must then be reduced in volume before passing through the recycling process. This volume reduction step is performed by recycling companies and public recycling depots or in cardboard packaging and corrugated board factories.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Recycling equipments for municipal solid waste (MSW) recycling

    During recent year it has become increasingly evident that an alternative energy sources has to be explored. RDF (Residual Derived Fuel) uses the energy content of the traditional household waste in order to substitute fuel. The production of RDF is the optimum solution both environmentally and economically. To optimize the process, it is important to reduce the waste volume into a homogeneous fraction size of e.g.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you