Only show results in Virginia? Ok

effluent discharge Applications

  • Premium

    Wastewater solutions for the industrial effluent pollution management

    Problem: Industrial manufacturers face stringent regulations for discharging wastewater to the environment and municipal sewer systems. Biochemical Oxygen Demand (BOD) is a primary concern for many discharge limits, as wastewaters high in BOD can have adverse impacts on the aquatic environments by leading to oxygen depletion. In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given effluent.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent monitoring and perform water analysis for key consent parameters.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before discharge of effluent wastes. This can be done manually with handheld instruments or automatically with in-line monitor/controllers.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Online Monitoring for the Wastewater Treatment Industry

    AppliTek`s large portfolio of on-line analyzers enables you to monitor precisely the complete treatment process, from influent to effluent. Compliance with discharge regulations is another application example and typically expressed as sum parameters, for which AppliTek has unique solutions.

    For more information, please check the detailed section in this website on these topics:

    By AppliTek NV based in Nazareth, BELGIUM.

  • Mobile Sewage Treatment for Fishing Sites

    Remote fly-in recreational fishing lodges often require effluent to be discharged directly into surface water. NOMADIC™’s membrane technology produces the highest quality effluent of any sewage treatment technology available today.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Mobile Sewage Treatment for the Forestry Industry

    Companies in this industry often operate in sensitive and protected environments. We are able to provide the forestry industry with high treatment performance that produces effluent safe for discharge into delicate eco systems.

    By Nomadic Systems based in Langley, BRITISH COLUMBIA (CANADA).

  • Premium

    ppm Measurement of Oil in Water for the Petrochemical Industry

    Measuring the oil content in water or soil is a specialty of Wilks Enterprise. InfraCal TOG/TPH Analyzers provide on-site ppm measurements to help ensure upstream or downstream wastewater complies with discharge permits to avoid potentially costly fines. There are over 3,000 InfraCal TOG/TPH Analyzers in operation today around the world measuring the oil and grease levels in produced water on drilling platforms, oil content in FRAC water, hydrocarbons in wastewater effluents from refineries, and TPH in soil at remediation sites.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Process design & engineering services for water treatment industry

    Waste water is any water that has been adversely affected in quality by anthropogenic influence. Municipal wastewater is usually conveyed in a combined sewer or sanitary sewer, and treated at a wastewater treatment plant or septic. Treated wastewater is discharged into receiving water via an effluent sewer.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Wastewater Treatment for Breweries

    B & V Effluent services have been successfully helping brewers and distillers throughout the UK with the management of their effluent systems for nearly 30 years. As a result the B & V Effluent Team holds a vast amount of specialist knowledge in regards to the problems faced within the beverage industry including the management & reduction of pollutants in general to meet discharge consents.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Biological wastewater processes for mining

    The mining industry has the potential to use large amounts of wastewater in its operations. Often times these waste streams contain contaminants that require treatment before the water can be re-used or discharged. Biowater has successfully installed highly efficient biofilm treatment processes including our complete mix fixed film (CMFF®) system to remove BOD/COD, and nitrogen from mining waste streams. Biowater’s technologies, such as our CFIC® process, can produce effluent water quality that is acceptable for re-use, reducing the stress on ecosystems in water stressed areas.

    By Biowater Technology based in Cumberland, RHODE ISLAND (USA).

  • Wastewater Treament for Distilleries

    B & V Effluent Services have been successfully helping brewers and distillers throughout the UK with the management of their effluent systems for nearly 30 years. As a result the B & V Effluent Team holds a vast amount of specialist knowledge in regards to the problems faced within the alcohol industry including Copper Removal from discharge water and the management and reduction of pollutant levels in general to meet discharge limits.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Waste Water Treatment Applications

    B & V Effluent Services have been helping customers manage their waste water discharge effectively across a large number of industries for many years. B & V Effluent Services understand that each industry has its own set of considerations and constraints when it comes to managing their waste water. As a result B & V Effluent take specific approaches to the waste water management to ensure they can provide the best possible solutions to each client.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

  • Evaporators technology for waste & recycling industry

    The leachate produced by the waste in the landfill is an extremely pollutant effluent that requires high effective treatment processes to comply with the very strict limits for discharging operations. EVALED evaporators are a technological solution which allow to exploit the biogas cogeneration for the full or partial power supply of the plant within the limits of the environmental regulations and to reduce the relevant costs for thermal energy and leachate disposal.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Waste water respirometry solutions for toxicity testing

    If industrial wastewater entering a treatment works contains toxic components the rate of biodegradation will be inhibited or stop completely. This can result in failed consents and will certainly give rise to operational problems. Visible indications include deflocculation, bulking and the appearance of filamentous bacteria. Sometimes, there are no visible effects. When the sludge bacteria are inhibited, there is the possibility of toxicity carryover in the effluent that is discharged to receiving waters. With new environmental legislation being introduced, worldwide, to protect the natural environment, toxin discharge is now a serious concern for treatment plant managers.

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Wastewater Treatment for Manufacturing

    B & V Effluent Services have been helping the manufacturing industry with its waste water management for a number of years. This has allowed B & V Effluent Services to develop a specific skill set and technical knowledge to help us provide excellent solutions to a number of blue chip company’s within the manufacturing industry. Modern manufacturing production systems have been developed to use cleaning water more efficiently however this water for a variety of reasons brings about a series of challenges when discharged as part of a sites effluent. B & V Effluent Services experience within this industry enables us to provide solutions to all manner of issues as well looking to optimise systems and save money for our clients wherever possible.

    By B & V Water Treatment based in Daventry, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you