Only show results available in Virginia? Ok

electrical safety Applications

  • Environment health and safety software for the electricity industry

    Intelex works closely with clients in the Electricity industry to keep their workforces safe, improve their environmental performance and streamline the collection, reporting and tracking of key organizational data. Whether you are involved with electricity transmission, generation or distribution, Intelex has a software solution that will work for you.

    By Intelex Technologies Inc. based in Toronto, ONTARIO (CANADA).

  • Trapped Key Interlocks for Ports

    Interlocks can be used in many process or procedural systems within Ports involving the transmission of electricity, including crane movement, Ship to Shore power, and local substations or backup generators. KIRK type DM locks with chain that are attached to medium voltage connectors located in quayside vaults ensure proper procedure is followed when connecting shore to ship power. These MV connectors feed the ships with crucial electricity, enabling diesel on-ship generators to be switched off whilst in dock, also known as cold ironing. The upstream breakers feeding the vaults are equipped with KIRK® type F locks, which are keyed to correspond to the interlocks on the vault cover or connectors. This ensures power is disconnected before the connectors can be engaged or disengaged, prohibiting operations under load.

    By Kirk Key Interlock Company based in North Canton, OHIO (USA).

  • Electrical Based Tomography Systems for Multiphase Flow

    Multiphase flows are complex and unpredictable however they have a significant bearing on the safety, costs and revenues of many processes – particularly in oil and gas, but also in aerospace, chemicals and other sectors.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Premium

    Chemical Water Treatment for boiler water & heating systems

    In nearly all industrial areas steam is needed for different aims e.g. steam for process side, heating purpose or the generation of electricity. To reach the best efficiency of the boiler system an optimal boiler water treatment is essential. Disturbances in boilers caused by deposits, scaling, corrosion, local overheating or carryover into the steam reduce the operating safety and could lead to tremendous economic damages. Kurita delivers innovative technologies to prevent scale and corrosion in the whole boiler system - feed water tank, boiler, steam and condensate system.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Air filtration and gas purification solutions for industries

    Within the industrial sector there are specific installations which should pay maximum attention to the protection of their control rooms against corrosion. This is because their activities generate highly corrosive gasses which need to be eliminated in case they affect the functioning of critical electrical equipment. This corrosion compromises the efficiency and safety and can affect the production process itself.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Automated solutions for the hazardous waste pit dredging

    Liquid Waste Technology’s electric and diesel driven dredges can improve safety for workers dredging hazardous materials. Our custom built dredges can be equipped with remote control to allow workers to stand up to 762 meters (2500 feet) away from the toxic area, increasing their safety. Liquid Waste Technology can build dredges with automated controls, that dredge entire ponds using PLC controls. This increases workers safety and productivity in hazardous dredging applications.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Water Disinfection for Oil and Gas Water Treatment

    Economic, environmental and operational demands challenge drilling operators to produce results in a highly regulated and competitive environment. MIOX chemical generators offers an efficient, effective, low cost solution for treating high volumes of water and achieve a superior bacterial kill. And because MIOX technology operates with salt, water and electricity, there are virtually no health, safety or environmental concerns at the drill site or down-hole.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Frac water treatment for oil and gas industry

    Economic, environmental and operational demands challenge Hydraulic Fracturing (frac) operators to produce results in a highly regulated and competitive environment. Our mobile MIOX frac water unit offers an efficient, effective, low cost solution for treating high volumes and high rates with superior bacterial kill. And because MIOX technology operates with salt, water and electricity, there are virtually no health, safety or environmental concerns at the drill site or down-hole.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • K&S performs Solarpark supervision in Japan to secure high quality standards

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Pulsair`s industrial mixers for biodiesel fuel industry

    Pulsair Systems manufactures the most efficient and effective storage tank mixing process for blending and agitating biodiesel fuel. The efficient Pulsair mixing process is well suited for the high viscosity and heavy fluid characteristic of biodiesel. Pulsair offers a complete line of off the shelf biodiesel fuel mixers and agitators for mixing in a 55-gallon drum or larger 250 - 1 million+ gallon tanks for biodiesel fuel storage or production. Pulsair biodiesel fuel mixers are explosion proof and safe for biodiesel mixing. Biodiesel is a flammable product and the fire risks are reduced when using the Pulsair mixing process because our mixers do not require electricity at the mixing site. This improves the overall safety of the biodiesel production process and biodiesel fuel storage tank mixing and agitation.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Supervision of Photovoltaic Power Plants in Japan

    The team of K&S technical experts perform independent technical inspections of the photovoltaic system and clarifies technical issues. The advisory service begins even before the actual construction of the photovoltaic power plant - in the design and contract review. It is ensured that all the requirements of the building permit of the relevant Japanese authorities are fulfilled and the contract is aligned with the system. Based on the continuous construction and factory acceptance tests of components, possible quality defects from the start can be reduced to an absolute minimum. With the local networks of the Japanese technology institutions such as New Energy and Industrial Technology Development Organization (NEDO), Japan Electrical Safety & Environment Technology Laboratories (JET), Japan Photovoltaic Energy Association (JPEA) and other leading technology institutions, K&S combines a comprehensive local technical advisory service in Japan.

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you