Only show results available in Virginia? Ok

electronic waste processing Applications

  • Electronic scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. With many successful customers operating around the world, SSI has found the best electronics scrap processing system design philosophy is to employ machinery to separate commodities at the first point they become marketable, at the highest capacity possible, and refine high value materials after initial separation.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Shredding and crushing systems for electronic waste

    For optimal processing of electronic waste, it is especially important to yield secondary raw materials that are as pure as possible. For this purpose Mercodor, with its rugged, compact precision cutters, has exactly the right solution.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Electronic scrap shredding for the electronic waste management industry

    One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Shredding of electronic waste with Mercodor equipment

    For optimal processing of electronic waste, it is especially important to yield secondary raw materials that are as pure as possible. For this purpose Mercodor, with its rugged, compact precision cutters, has exactly the right solution.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Shredding solutions for Electronic Waste (WEEE)

    The constant technological improvements of the electronic devices and the subsequent obsolescence of the electronic equipment we use on a daily base has increased the amount of the material to be processed in the metal and plastic recycling business. PCs, laptops, smartphones, USB sticks, credit cards, microwaves, washing machines are just some examples of the products that can be processed in order to recover materials.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs, DVTs, TFT-LCD and plasma displays. The electronics industry has important standards to meet regarding environmental protection. CTP complies with these requirements: From zero emission goals, to installations on the roofs of production facilities.

  • Water quality monitoring for semiconductor industry

    Water is fundamental to the manufacturing process in a semiconductor facility. Electronic components are rinsed or washed several times during the producing process with ultrapure water (UPW) to remove residue. Continuous monitoring of organic constituents (TOC) on the influent city water assist with UPW production. Good quality waste streams for the manufacturing process can also be monitored for reuse potential.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Harden Shredding Technology for Metal-processing Industry

    Harden Shredding Technology for Metal-processing IndustryMetal waste may be comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! The processing of scrap metal is strongly related to steelworks and, therefore, it becomes fundamental to deliver uniform material with a high specific weight. Harden scrap metal shredders are perfect parallel to shearing machines for volume reduction, hence qualifying the material as shovelable, but are also applicable upstream of the hammer mills, facilitating the work in terms of safety, wear and electricity consumption. The main fields of application are: • Light waste collection • Collection in packages • Unmodified or packaged automobiles (including with engine) • Rolling mill trimmings • Sheet metal • Oversized metal items (cabinets, etc.)

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology Gmbh based in Kuchl, AUSTRIA.

  • Premium

    Shredders and crushers for refrigerator recycling

    Erdwich reclaims even Pentane and CFCs with 99% purity! Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. The fact that pre-processing of legacy refrigeration units always needs to be carried out in accordance with the latest technological standards means that plant operators gain a decisive advantage when working with an innovative and experienced plant manufacturer.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Scrap Metal Recycling

    Recognized as an industry leader in shredder recycling, we operate 50 recycling facilities for metal, green waste, plastic, food waste, rubber, tires, RDF waste. Harden’s facilities are designed with safety and efficiency in mind for both employees and customers. Our equipment is maintained and updated regularly and our scales are calibrated quarterly. The properties of metals provide unique benefits and advantages for their recycling. Unlike other recycled materials, such as paper and plastic, metals can be repeatedly recycled without degradation of their properties. Metals from secondary sources are just as good as metals from the primary sources. The scrap metal recycling lines are extremely heavy duty systems designed for processing scrap steel, electronic waste, aluminum castings and profiles, ect. We offer both medium and high capacity plants which benefit from low maintenance & operational costs, and lower capital investment when compared with the traditional systems.

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • REPLACING WATER SOFTENER WITH GREEN SCALEWATCHER WATER CONDITIONER

    Roper’s Restaurant, a cowboy themed restaurant in Albuquerque, New Mexico has replaced its water softener with the computerized, electronic, water-conditioner Scalewatcher from Scalewatcher North America. By installing Scalewatcher, the restaurant has avoided paying the $500 quoted for replacement media for its old water softener and also saved hundreds of dollars a year in salt and water thereby providing Roper’s with a short-term payback on the unit. Roper’s Restaurant, part of Outwest Eateries LLC dba, is located in a hard water area. This necessitated Bryce Chant, owner of Roper’s Restaurant using a water softener to prevent scale formation in the kitchen. “When I was given the price to repair our old water softener, I decided to install the Scalewatcher from Advance Plumbing”, said Bryce Chant of Roper’s Restaurant. We have had great success with it. Even though we had a water softener we still had hard water scale and a white ‘film’ in the dishwasher. Now with Scalewatcher that scale and ‘film’ has disappeared.” The average restaurant consumes 5,800 gallons of water daily, with 50% being used in the kitchen. If not properly treated, hard water can drain a restaurant’s bottom line due to the early renewal of capital equipment such as water heaters, boilers, coffee makers, dishwashers, steamers and other water-fed equipment. Hard water contains calcium carbonate that adheres to heating elements and the internal surfaces causing scale buildup that impairs efficiency. The limescale that deposits on the heating element will, if untreated, reduces efficiency, induces corrosion of the element and ultimately lead to appliance failure. In addition in restaurants, hard water also necessitates the use of additional detergents. In fact, for every additional grain of hard water, detergent use increases by between 2% and 4% per 1,000 gallons of water used. Many restaurants, like Roper’s use a water softener to reduce limescale. However, water softeners use copious amounts of both water and salt, which are expensive to buy and salt is also bulky to store. In addition, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps restaurants meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from water-fed equipment. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “We are saving money each month because we do not have to purchase salt for the water softener and we are not dumping salt filled water down the drain because there is no brine process with Scalewatcher”, said Bryce Chant. “Living in New Mexico with our drought situation, I hated knowing all that water was being wasted. Scalewatcher is a truly ‘green’ technology that we are happy we have implemented”. Roper’s Restaurant has been so impressed with the Scalewatcher technology that the managers have bought units for their homes and have recommended it to family and friends. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you