Only show results available in Virginia? Ok

electronic waste recycling Applications

  • Premium

    Recycling equipments for electronic waste recycling (WEEE)

    The content of WEEE (electrical and electronic waste) gives recyclers various initiatives for recycling. It contains hazardous substances, such as lead, mercury or certain flame retardants, as well as precious metals like gold and silver. In 2012 approx. 64,900.000 ton electronic goods where produced and 49.000.000 ton electrical and electronic waste (WEEE) was generated. As the amount of sold electronic goods rise, the amount of WEEE rises. It is vital that this waste is taken care of properly.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Shredding of electronic waste with Mercodor equipment

    For optimal processing of electronic waste, it is especially important to yield secondary raw materials that are as pure as possible. For this purpose Mercodor, with its rugged, compact precision cutters, has exactly the right solution.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Premium

    Electronic scrap shredding for the electronic waste management industry

    One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still substantially lower. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Shredders and crushers for LCD monitor recycling

    According to initial estimates, in Germany about three million LCD monitors will be recycled in the year 2016. However, they often still have backlighting containing mercury and therefore have to be classified as “hazardous waste” in accordance with the German General Administrative Regulation (AVV) and registered in compliance with the German Electrical and Electronic Equipment Act (Elektro G) under category 3. Whereby special conditions must ensure that no risk arises from the mercury for the environment or for humans. However, because of a lack of suitable automated procedures for the recycling of LCD monitors, it was to date only possible to dissemble the appliances laboriously by hand, with the ensuing health dangers for the workers.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their different atomic densities, and analysing the data from the X-Rays using a bi-chromatic sensor system. X-TRACT is the first industrial application for any dry mechanical density sorting.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Products for W.E.E.E recycling and car fluff

    Lines for the recycling of all the metals present in electrical, electronic household appliances and car-fluff.

    By Guidetti S.r.l. based in Renazzo (FE), ITALY.

  • Premium

    Processing of LCD screens

    The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as 'hazardous waste' in accordance with the EWC, and as 'Collection Group 3' in accordance with the Electrical and Electronic Appliance Law. They also contain valuable raw materials, such as metals and plastics, which have to be recovered in such a way, that the environment is not harmed. However, recycling specialists, Erdwich Zerkleinerungssysteme GmbH, have now developed an alternative: The company from Kaufering has developed an automatic processing system that enables mercury and other valuable raw materials to be easily extracted and recycled in an environmentally-friendly way.

    By Erdwich Zerkleinerungssysteme GmbH based in Kaufering, GERMANY.

  • Premium

    Removal of Non-Ferrous Metals in the Recycling Industry

    Non magnetic metals such aluminum + copper can be separated using eriez eddy current separators or meta sorters. Eriez equipment, either as individual units or complete systems, is designed for efficient + economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Recycling of plastic waste

    Recyclable plastics can come from a large range of sources. Shredder residues containing plastics are typically coming from small domestic appliances, electrical and electronic equipment and cars. These materials each have their own difficulties when they have to be processed to recover clean plastics. With the GRS equipment we are able to handle each type of these materials.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Removal of Ferrous Metals in the Recycling Industry

    Carbon steel metal can be separated from non-recyclables using Eriez magnetic separators.

    Eriez equipment, either as individual units or complete systems, is designed for efficient and economical processing of municipal solid waste, co-mingled recyclables, shredded automobiles, Electronic Scrap, Glass Cullet, Plastic (PET), foundry sand and many other resource recovery options.

    From permanent magnets to scrap drums and magnetic drums to metal detection for further material purity and feeding equipment, Eriez recycling team assists recycled material processors, material recycling facilities alike in improving product quality and recovering valuable commodity. 

    By Eriez Magnetics Europe Ltd based in Bedwas, UNITED KINGDOM.

  • Premium

    Metal Sorting - Electronic Scrap Sorting

    The recycling of disused and obsolete electrical and electronic equipment is gaining more and more importance world-wide. Waste electrical equipment is an incredibly rewarding source of raw materials. In Waste electrical equipment, up to hundreds of times more precious metals can be found per ton of material than in the primary source of raw material, ore. The goal for TITECH and the industry as a whole is to utilise electronic scrap recycling and sort out pollutants on one hand and profitable components in high purity on the other. For electronic recycling purposes, the EU classifies W??? into 10 categories. After separate collection of TVs, fridges and so on, they are processed and sorted in electronic scrap recycling systems. The average content of thus gained materials is as follows: metals (50%), plastics (30%), glass (10%) and other materials (10%).

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    E-scrap processing & shredding

    SSI manufactures shredders and automated systems to efficiently process all varieties of electronic scrap for recycling, reclamation and recovery. Since 1980, SSI has designed and implemented effective electronic scrap (e-scrap) processing solutions worldwide. With capacities from 2 - 15 tons per hour, many of the world`s largest e-scrap processing facilities employ `automated material recovery systems` from SSI, to extract marketable materials.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Premium

    Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

    Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Shredding solutions for secure destruction of the hard disk

    The secure destruction of the hard disk: from today, with SatrindTech it`s even easier.

    Every time that we install programs or apps for our smartphones, when we use internet services or we sign modules, we consent to the treatment of our personal data, which is generally digitized on electronic supports (generally hard disks).

    Correct management of our privacy requires total protection of the data contained, even during the destruction phase, of these supports.

    By SatrindTech Srl based in Arluno, ITALY.

  • Premium

    Printed circuit boards shredding with Mercodor shredding systems

    The crushing of printed circuit boards is used for the recovery of important raw materials. Since electric devices getting cheaper consumers in ever shorter intervals to acquire new electronic parts, the recycling of electrical parts and thus crushing printed circuit boards of inestimable value for resource exploitation. Mercodor special engineering is your partner for professional shredding of printed circuit boards.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • e-scrap recycling System

    PCB Boards and E-scrap Recycling Plant 3.Why buy MINGXIN's E waste(PCB) Recycling plant ? Get the metal separated from waste circuit board through crushing and air separation process. No incineration and pollution. compliance with EHS standard, no harmfulness to workers, eco-friendly solution for E waste recycling. The plant has 5 advantages: A. The coarse crush can grind baseplate and separate electronic component.. B. National Environment Protection Standard achieved. No dust leak and no secondary pollution . C. Low energy consumption but high production. D. High metal recovery rate which reaches 97%-99%. Metal content in on-metal powder is less than 1%. E. Patent number: ZL02247015.8

    By Jiangxi Mingxin Metallurgy Equipment Co.,Ltd. based in Shicheng County, CHINA.

  • Industrial shredders for WEEE/cables industry

    Since 2003 in Europe, the professionals of the sector of the electric and electronic components must organize dies of recovery, recycling or valorization of their called worn products WEEE (Waste Electrical and Electronic Equipment). Before the evolution of the legislation, Préciméca proposes since 1998 a machine (range 01-02) for the treatment of electronic cards. Large electric household appliances (ranges 50-02, 14-02, 17-02) with the Small household products (14-02, 12-02) to the data-processing components, you will find at Préciméca the machine adapted to your needs.

    By PRECIMECA Environnement based in Toulouse, FRANCE.

  • Premium

    Recycling and processing of WEEE

    Next to processing shredder light and heavy shredder fraction the Ad Rem machinery is also capable of processing waste of electrical and electronic equipment. WEEE can be processed on the same machinery as ASR is processed without any modifications. This makes it possible to get more input into the system and therefore costing less per ton.

    By AD REM N.V. (Valtech Group) based in Menen, BELGIUM.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you