Only show results available in Virginia? Ok

emissions regulation Applications

  • Air emissions testing for air regulations and compliance consulting

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Environmental Reporting

    The Q EHS Environmental Reporting suite provides key tools for compliance with environmental legislation pertaining to the management, storage, use release, and disposal of hazardous materials. The software was developed to produce a variety of practical reports such as: • Performance and compliance assessments • Regulatory report submittals • Metrics and trend analyses for facility, divisional, and corporate management • On-site environmental incident occurrences Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS Hazardous Materials Allow you to: • Associate and roll up usage data to appropriate unit - Business - Group - Sector - Division - Geographic - User-defined parameter • Estimate expected and potential emissions from various sources • Establish operating limits for automated checks and warning messages

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Premium

    Remote sensing of ship emissions

    New regulation forces ships to lower the emissions of SO2. Ships travelling in SECA areas has to either run on low sulphur fuel, or install SO2 scrubbers. To measure the SO2 emissions from a ship is not an easy task. OPSIS provides the Port Authorities with a unique measurement principle where the emissions from the ship is measured remotely. Light is passing the emissions and by analyzing the light, concentrations of SO2 can be measured.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Laser gas detection for environmental compliance

    Axetris laser gas detection OEM modules are used in a variety of environmental applications: Biogas Detection, Continuous Emissions Monitoring CEM, Fugitive Emissions, Natural Gas Detection.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Marine emissions monitoring

    In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines for failing to meet these new requirements on the “polluter pays” principle.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Opacity monitoring for continuous emissions

    The history of air pollution regulation dates back as far as the 13th century when in 1273, Edward I (Longshanks) of England prohibited the burning of sea coal in London. The smoke produced by its combustion was considered detrimental to human health. By the late 19th and early 20th centuries, regulations were being passed that sought to control air pollution predominantly for smoke and odour control. Traditionally, regulators were concerned with the visual impact of the discharge from a stack or chimney. Therefore, emission limits were expressed in terms of colour or opacity. Modern methods for opacity measurement still use the darkness of the stack gases to measure the amount of smoke or dust emitted within the exhaust gases.

    By DynOptic Systems Ltd based in Brackley, UNITED KINGDOM.

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into the air we breathe. The REACH regulation places the responsibility on manufacturers and importers to test their products and provide safety information to the purchaser, end user or consumers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Laboratory Weighing - Filter Weighing

    Traffic means mobility and air emissions. Thanks to economical advantages, diesel engine becomes more and more popular, but particle emission is strictly restricted by regulations. Determining the weight of particulate matter (PM) is a key task in the automotive industry and one which is likely to become even more important as emissions standards become stricter. To allow fast and easy measurement of particulate matter at any time, METTLER TOLEDO has developed new filter weighing solutions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Gas monitoring instruments and systems for stack testing

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Air pollution control solution for the particulate matter

    Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

    By Pollution Srl based in Budrio, ITALY.

  • Premium

    Air pollution control solution for the NOx and CO2

    Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a pure CO2 product, making sequestration a more appealing option.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Industrial Solution for incineration & thermal treatment

    Waste incineration, including solid municipal and hazardous waste, biomedical waste and hazardous liquid are all continually under more stringent scrutiny by regulators. Macrotek has designed and supplied many integrated systems to meet most guidelines. In several installations, hazardous waste has been combined with radioactive waste, requiring nearly non-detectable emission levels for many of the contaminants. Macrotek has installed and tested systems for these processes with the results significantly better than required standards.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Mercury monitoring for on-site remediation

    Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for multiplexing the Tekran 2537 for real-time continuous on-site monitoring of mercury fugitive emissions. Please contact us for more information on mercury remediation monitoring.

    By Tekran Instruments Corporation based in Knoxville, TENNESSEE (USA).

  • Environmental Solutions for Airlines

    Governments the world over are now working on regulations that will require Airlines to monitor and manage their GHG emissions. The UK is leading this effort with requirements for 2010 - 2012, and other countries are soon to follow. Implementation of GHGWARE and the VisionMonitor Real-Time Environmental Performance Suite allows proactive GHG emissions and compliance data management in real-time as well as predictive modeling tools for planning of future regulatory compliance.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Mandatory GHG Reporting

    Our Impacts can help companies listed on the London Stock exchange to comply with their new Mandatory Carbon Reporting duties, laid out in The Companies Act 2006 (Strategic Report and Directors’ Report) Regulations 2013, which requires around 1,100 of the UK’s largest listed companies to report their greenhouse gas emissions every year.

    By Ecometrica based in London, UNITED KINGDOM.

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Data Acquisition and Control

    Many companies worry over the quality of emissions data reported to the EPA. CEMS Experts is a skilled and experienced company with over 20 years of proven and dependable service to provide you with a reliable solution to your Analyzer Management and Data Acquisition Software needs. We supply customized DAS solutions for all federal (EPA), state and local CEMS regulations, plus off-the-shelf products for process monitoring, ambient air testing, or any other application requiring fast, reliable data capture and reporting.

    By CEMS Experts - a division of GK Associates, Inc. based in Simi Valley, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you