Only show results in Connecticut? Ok

emissions testing Applications

  • Premium

    Stack emissions monitoring

    Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone instruments.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Emissions testing for engines

    Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors...

    By Testo, Inc. based in Sparta, NEW JERSEY (USA).

  • Premium

    Monitoring solutions for the continuous emissions monitoring

    Multi-gas Stack Analyzers for Continuous Emissions Monitoring. FTIR and UVDOAS Analyzer Models available for Insitu Probe, Internal or External Cells, or Cross Stack Sample Acquisition.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Transportable Emissions Analyzer for Art of Emissions Monitoring and Sampling: Maintaining Gas Integrity

    Accurate emissions monitoring from industrial processes is critical for determining overall system combustion effciency, environmental compliance and safety. However, there is no “one-size-fits-all” approach to proper emissions monitoring as each application encompasses different system considerations. The art of emissions monitoring and sampling requires:

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Air monitoring equipments for material emissions and product testing

    A wide variety of products that are used in our indoor environments may emit harmful substances, raising health and safety concerns in homes, offices, public places and vehicles. There is increasing demand to reduce VOC emissions from indoor sources, backed by European legislation. REACH regulation is a European initiative for the Registration, Evaluation, Authorisation and Restriction of Chemical Substances. It was implemented to protect human health and the environment from harmful emissions of chemicals into...

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Continuous emissions monitoring for real driving emissions

    There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Environmental solutions for the environmental/emissions sector

    Environmental control technologies for the environmental/emissions sector.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Measurement solution for WID Emissions Monitoring

    Protea is the most experienced company in the UK in using FTIR gas analyser to measure emissions. Through running a UKAS-accredited test house and being a manufacturer of gas analysers, we have been involved in FTIR as a supplier and end-user for 10 years.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Hand Held Analyzer for Forklift CO Emissions

    Many forklift trucks have internal combustion engines that burn propane, natural gas, diesel, or other fossil fuels. A portable combustion gas and emissions analyzer can be used to optimize combustion efficiency & maximize fuel savings, identify and quantify sources that can adversely affect safety and comfort in the work environment, and measure and reduce harmful emissions in the forklift engine exhuast gas.

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Particle measurement and sampling equipment for Stationary source emissions

    Dekati has over 25 years of experience in providing measurement solutions for emission measurements. Today, our selection of measurement solutions for stationary source emission measurements include both real-time and gravimetric detection of concentration and particle size distribution. Our extensive line of sample conditioning devices enable not only environmental emission measurements but also measurements directly from the combustion zone and before heat exchangers and used flue gas cleaning devices. Dekati...

    By Dekati Ltd. based in Kangasala, FINLAND.

  • Premium

    Portable Emissions Analyzer for Gas & Diesel Engine Applications

    There are many types of stationary and mobile internal combustion engines that can run off gas or diesel fuels. Engines can be lean burning at a high air to fuel ratio (AFR) or rich burning at a low AFR. The exhaust stack gases from engines contain pollutant gases including CO, NO, NO2, NOx, and CxHy hydrocarbons as well as particulate matter. Measuring the engine exhaust emissions is important for engine tuning, performance optimization, safety, and proving emissions compliance to regulatory authorities.

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Measurement of hydrogen sulfide & carbon disulfide in air for continous emission monitoring

    The Series 8900 Hydrogen Sulfide and Carbon Disulfide Analyzer provides direct measurement of H2S and CS2 in ambient air. This instrument is utilized for continuous emission monitoring. The Series 8900 H2S and CS2 Analyzer employs a Photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Continuous Emission Monitoring

    By MRU Instruments, Inc. based in Houston, TEXAS (USA).

  • Premium

    VOC emission treatment for Coating industry

    Specific characteristics of this Industry: Large air flows. Medium VOC concentrations.

    By Tecam Group based in Polinyà, SPAIN.

  • Measurement solution for HF emissions from brickworks

    Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Gas analysis & monitoring systems for emission monitoring

    From the environmental point of view, an issue is any solid, liquid or gaseous substance introduced into the atmosphere that can cause air pollution. Given the wide variety of substances present in the atmosphere, have been proposed several methods of classification: Primary pollutants can be of gaseous or particulate.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Particle measurement and sampling equipment for Non-Exhaust vehicle emissions

    As exhaust emissions from engine tailpipe have been decreasing in recent years through development of engines and exhaust after-treatment systems, non-exhaust emissions have become a major contributor to total particle emissions from vehicles. Dekati provides complete measurement solutions for brake wear and blow-by gas emission measurements and we can cover the complete particle size using only one measurement method – 6 nm – 10 µm with one measurement method.

    By Dekati Ltd. based in Kangasala, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you