Only show results in Virginia? Ok

en1822-5 Applications

  • Premium

    Petrochemical

    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Odor control for rubber and plastic

    From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors without the use of masking agents or fragrances.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Secondary Containment Systems

    Materials used in our liner systems are High Density Polyethylene (HDPE), PVC, EPDM, Polypropylene (RPP) & XR-5 liners.

    By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA).

  • Premium

    Water treatment solutions for energy generation industry

    Powerful components for power plants. ProMinent solutions simplify everything: even complex power plant systems are optimally organised through a combination of our pumps and metering systems.

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Air sampling for emergencies

    Deployable battery operated monitoring systems for measurement of dusts (PM10, PM2.5), gases and vapours. Generally used for measurements of site boundaries or chemical incidents

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Doppler flow meter for frac sand slurry flow monitoring

    CanFrac Sands Ltd. of Lloydmister, Saskatchewan install a Greyline DFM 5.0 Doppler Flow Meter to measure fracturing sand slurry when their in-line flowmeters were being damaged by the abrasive slurry.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Flare gas measurement flow for solutions

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Solutions for irrigation flow monitoring in submerged culverts

    Greyline DFM 5.0 Doppler Flow Meters with waterproof ultrasonic sensors measure flow in submerged concrete culverts in the Raymond Irrigation District in Alberta, Canada.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Non-contacting solution for plugged off flow meters in the oil patch

    Wax and solids build-up were plugging off pipes and in-line flowmeters at this oil battery site in Alberta. Read how Petrobakken Energy solved the problem by switching to Greyline DFM 5.0 Doppler Flow Meters with non-contacting ultrasonic sensors.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Waste sorting solutions for the packaging industry

    Packaging waste is mostly made up of different polymers, beverage cartons, paper and glass. Depending on the country in question, different collection systems apply and the material will invariably arrive in different conditions to the MRF’s (Materials Recovery Facility).

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Open Channel flow monitoring for wastewater treatment plant

    After 16 years of service, the Long Sault WWTP replaced two older Greyline Open Channel Flow Monitors with new data logging OCF 5.0 models. This SBR treatment plant`s influent is measured with flow through two 6` Parshall Flumes.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Recycling sorting solutions for the ash recycling

    Incinerated municipal solids and other waste streams results in a significant amount of ash residue, which often contains valuable metals. The amount of this remnant being created globally is rapidly increasing due to legislation which prohibits landfilling and creates new incentives for incineration. TOMRA Sorting sensor-based systems allow waste management businesses to capitalize on today’s challenges whilst simultaneously enabling them to look to the future with confidence.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Geotextiles solutions for pipeline construction areas

    The world registers less than 3.5 million kms of pipelines in 120 countries. Pipelines conveying flammable or explosive material, such as natural gas or oil, pose special safety concerns. To avoid pipeline instability and damage caused by differential settlements, TenCate Geosynthetics EMEA offers you the optimum solution from its wide range of reinforcement geosynthetics: TenCate Geolon PET & PP, TenCate Miragrid GX & TenCate Rock PEC ranges.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Recycling equipments for shredder light fraction (SLF) recycling

    Dismantled ELVs (End of Life Vehicles) are sold to shredder operators and are reduced to fist-size pieces by large rotating hammer mills. The Shredder Light Fraction (SLF) is removed from the stream by suction, the intensity of which determines the amount and composition of the SLF. SLF consists essentially of plastics/rubber (~60%), Glass/sand i.e. mineral substances (~15%), Textiles/leather/wood (~10%), Paint dust/rust (~10%) and Residual metals (~5%). Other names for SLF are ASR (Automobile Shredder Residue) and Auto fluff or just fluff.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Sialex for the OEMs Application

    Our products are installed on many industrial areas and in the private household.We have also experience with fluids other than water, which will receive more attention in the future. Sialex is a production process employed in the manufacture of a range of fluid treatment devices. The initial product Sialex®Ring is an “After-sales” device. It is added to existing products (water pipes, in front of heat exchangers, water boilers etc.). Our devices are installed after the original device has been installed.

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Premium

    Water treatment chemicals for the manufacturing industry

    In all industrial sectors, productivity and economic efficiency are the main factors for sustainable success. Reliable and durable production plants together with their cooling, boiler and waste water systems therefore play an important role. For more than 60 years, Kurita has specialized in water and process treatment. Our 5,200 employees work on behalf of our customers worldwide in a variety of industrial fields. Our individual treatment concepts and competent service help ensure the safe and economical operation of their facilities.

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Facilities management in line air flow meter solutions

    Sierra’s offers a complete line of precision flow solutions for any gas, liquid or steam measurement to improve energy efficiency in all facilities management applications. Our mass vortex meters are used to allocate steam, our in line thermal mass flow meters track and allocate natural gas and compressed air usage, and our clamp-on and insertion ultrasonic meters provide accurate water and water-based fluid measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Environmental dewatering solutions for municipal sewage and wastewater treatment

    TenCate Geotube technology dewaters primary, secondary and overflow sludge from the sewage treatment plants’ digesters and lagoons. This municipal dewatering solution is used in water and wastewater treatment applications including lagoons, tanks, and digester cleanouts.  The containers can provide dewatering and containment in one operation, with 85% to 90% reduction of BOD in the effluent. Most of the time, the dewatered effluent is clear and safe enough to be returned to the sewage treatment plants.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you