Only show results available in Virginia? Ok

energy cost control Applications

  • Premium

    Air pollution control for the energy recovery industry

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities regard energy consumption. Process equipment and air pollution control systems installed several years ago may not reflect the new energy conscious designs available today. We recommend analyzing these systems periodically to determine energy reduction opportunities. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Measurement and control systems for the heat & steam technology

    Reduction of perating costs: The increased energy costs over the last years have made investments towards heat recovery solutions not only cost effective but profitable. With the support and input of our employees and our technical know how, are improvements and solutions concerning heat recovery become feasible.

    By IGEMA GmbH based in Münster, GERMANY.

  • EcoSmart Intelligent Energy Management System

    The EcoSmart brand encompasses a cloud-based wireless energy management system that aggressively reduces utility costs while maintaining room comfort in spaces with unpredictable occupancy patterns. The EcoSmart suite of products includes intelligent thermostats, outlets and switches that can be networked and integrated with many other ZigBee® wireless enabled room automation devices and communicate with BACnet® compatible HVAC control systems.

    By Telkonet Inc. based in Waukesha, WISCONSIN (USA).

  • Energy reduction and coagulation process control for wastewater treatment industry

    One of the biggest costs for water-water treatment is energy consumption; the cost of which is likely to escalate with increased demand. Ineffective process control may not only be costly but environmentally impacts though the inefficient use of an un-renewable resource. Furthermore, poor process control in one area may also impinge on neighbouring processes ultimately affecting effluent water quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Air pollution control (APC) equipments for metal industry

    In the production of metals from ore or recycled products there are many processes where pollutants form. Smelters require high amount of energy and depending on the source of this energy and where production takes place, energy consumption can also contribute to the amount of pollution in your flue gas. In processes for metals, the metal should be purified from unwanted materials. It is inevitable that these materials as well as small amounts of the metals end up in the flue gas. Our technology is unique in its approach. It does not matter if your pollution is particulate matter, even if they are the smallest possible fraction of PM2.5, or if they are aerosols. Our patented technology handles them all. Because of the cost of production disruptions, the reliability and the high availability of our solutions provide benefits that further enhance the benefits of our technology solutions.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Flaring Solutions for Ethanol Loadout

    ABUTEC’s proprietary technology was designed to provide cost competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a 33% reduction in make-up fuel over premixed surface combustion systems or traditional nozzle burners. In addition, we meet state and federal requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology). Whether you are looking for vapor combustors, enclosed flares, ethanol loadout flares, truck loadout flares, loading terminal flares, emergency flares, or marketing terminal flares, contact us for reliable, safe solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Sialex for the Industry Application

    Our products are installed on many industrial areas and in the private household. We have also experience with fluids other than water, which will receive more attention in the future. Industry is asked to consider many operational issues. There is a drive to reduce the “carbon footprint”, costs must be tightly controlled in the face of rising energy costs, “downtime” of systems must be minimised to gain the most “return on the capital investment in plant and machinery”. Running costs must be tightly controlled.

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Geo Bags

    Geo Bags have the following advantages : -Affordable price with global standard specification -Available Ex-stock or fastest delivery, avoid blockage of money against container load Staggered delivery for sizable quantity acceptable. -In compare to conventional erosion protection work using C.C. Block, gravel, hard rock etc, sand filled geobags technology involves less cost. -World widely it has been seen that erosion protection work using Geo bags requires less installation and maintenance cost light weight equipment, less space for construction works, transportation cost, less energy requirement. -The constructing materials like sand of geo bag are locally available and cost-effective compared to importing boulders from other countries. -The manufacturing of geo bags and quality control of the bags are easy compared to the C.C. blocks and boulders.

    By Manas Geo Tech India Pvt. Ltd. based in New Delhi, INDIA.

  • CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

    Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you