Only show results available in Virginia? Ok

energy efficiency monitoring Applications

  • Industrial solutions for energy efficiency in buildings

    Nowadays, the new laws of protection and sustainability, increased energy prices and greater environmental awareness and drive increased largely rational use of energy, not only for end users but also large consumers and systems thereby improving efficiency in buildings.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

    Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

    Gas parameters: CH4 - CO2 - O2 - H2S

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Air sampling & monitoring systems for energy/utilities industry

    Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Low frequency noise analysis using XL2

    The Data Explorer PC software for the XL2 Sound Level Meter now includes a series of professional tools for detailed analysis of low-frequency noise (LFN). The graphical representation of time varying frequency components offers an efficient process for identifying the presence and level of LFN. Also the associated high quality audio recording supports further correlation with the objective measurement data. The new features are particularly useful in the calculation of immission levels which is defined as the cumulative noise energy to which an individual is exposed over time. Exposure to low-frequency noise over extended periods can lead to a range of health problems including cardio vascular disease, insomnia and depression. The sources of low frequency noise can often be attributed to electricity sub stations, chiller plants and incinerators with continuous noise at frequencies below 200 Hz. XL2 Sound Level Meter records all Data Measuring LFN requires a class 1 sound level meter

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane (CH4), and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas. CH4 is the gas component fuel, which is the intended end product of the anaerobic digestion process. In biogas plants, the concentration of CH4 in a working plant varies between 50%-75%, which is well above the Upper Explosive Limit (UEL).

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Waste water monitoring solutions for wastewater treatment industry

    Improved waste management through automation can deliver more efficient waste treatment, reduced energy and chemical consumption and improved effluent quality. The cost of treatment and trade discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Sludge monitoring for water and wastewater industry

    Improved monitoring and automation can deliver more efficient waste treatment and reduced energy consumption and improved effluent quality. The cost of treatment and the quality of effluent discharge can thus be significantly reduced.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Premium

    Indoor Air Quality Monitoring

    Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. CO2 production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks. Excess CO2 levels can lead to tiredness and a lack of concentration and can contribute to the symptoms of Sick Building Syndrome such as headaches, eye, nose and throat irritation, itchy skin and nausea.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Emissions testing for industrial boilers and burners

    Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don`t worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350`s compact design is better for working on a platform or small space. The automatic zero pressure measurement is ideal to monitor flow or draft induction. With a pitot tube you can quickly measure velocity and determine mass flow even during long term testing. The Testo 350 makes reporting in lbs/hour easy!

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Flow & Energy Management Solutions for pharmaceutical & semiconductor

    Several Spire Metering flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Pharmaceutical & Semiconductor Applications.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Methane and Carbon Dioxide Sensing for Biogas Applications

    Application: Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane, and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Flow & Energy Management Solutions for building automation

    For comprehensive energy efficiency monitoring for both hot water systems and chilled water systems. Reduce energy bills by monitoring the usage. Conserve energy and go green.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Flow & Energy Management Solutions for vehicle and vessel

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Chemical Analyzing in Photovoltaics for the Solar Power Industry

    In the earlier days, the chemistry involved in solar cell manufacturing was relatively simple, using commodity chemicals. With cell efficiencies continuously on the rise and new cell concepts slowly being introduced with increased speed of processing, precise chemical concentration control is becoming crucial to obtain consistency and more cost-effective manufacturing of solar panels. This is possible by monitoring on-line the etching bath composition, a small but genuine step forward in your competitive advantage.

    Typical parameters: NaOH – Si – HF – HNO3

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying the building. Carbon dioxide production is a function of the number, size and activity levels of the people present in the building. Local concentrations can therefore vary dramatically – for example when a meeting room is occupied, or while workers are on lunch or coffee breaks.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you